• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.98-99
• /
• 2019

본 논문에서는 PMSM(Permanent Magnet Synchronous Motor)의 구동 효율을 향상시키기 위한 최대 효율 제어 기법에 대해 제안한다. 제안된 기법은 전동기의 입력 전력이 최소가 되도록 Gradient Decent 알고리즘을 기반으로 하는 최적화 기법인 Adaptive 알고리즘을 통해 전류각을 조정한다. 제안된 기법을 통해 동손을 최소로 제어하는 기존 MTPA(Maximum Torque Per Ampere) 제어 방식 보다 구동 효율을 향상시킬 수 있으며 전동기의 제정수 오차에 강인하다. 1.7kW IPMSM의 모의실험을 통해 제안된 기법의 효용성을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.1
• /
• pp.22-28
• /
• 1989

This paper describes error estimate mothod for adaptive finite element analysis of two dimensional electrostatic and magnetostatic field problems. To estimate the local errors, divergence theorem is used for electrostatic field and Ampere's circuital law for magnetostatic field. To confirm the effectiveness of the proposed error estimators, adaptive finite element computations are performed using the proposed error estimators. The rates of convergence of global errors are comparable with those of existing adaptive finite element schemes which make use of field continuity conditions between element boundaries. This algorithm of error estimate can be easily implemented because of its simplicity. Especially, when the value of charge in electrostatic field and the value of current in magnetostatic field are to be figured out, this method is considerded to be preferable to other approaches.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.91-100
• /
• 2002

This paper deals with the ripple reduction of the electromagnetic torque developed in IPMSM(Interior Permanent Magnet Synchronous Motor). Generally, torque ripple is an important causes of vibration and noise of motor. For reducing torque ripple in IPM with nonsinusoidal EMF, the optimal current which is able to control maximum torque/ampere is considered to be introduced In the proposed method. The fact of torque ripple being reduced when the optimal current Is used in motor is verified through simulation and experiment.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.235-245
• /
• 2015

This paper proposes a reactive current assignment and control strategy for a doubly-fed induction generator (DFIG) based wind-turbine generation system under generic grid voltage sag or swell conditions. The system's active and reactive power constrains during grid faults are investigated with both the grid- and rotor-side convertors (GSC and RSC) maximum ampere limits considered. To meet the latest grid codes, especially the low- and high-voltage ride-through (LVRT and HVRT) requirements, an adaptive reactive current control scheme is investigated. In addition, a torque-oscillation suppression technique is designed to reduce the mechanism stress on turbine systems caused by intensive voltage variations. Simulation and experiment studies demonstrate the feasibility and effectiveness of the proposed control scheme to enhance the fault ride-through (FRT) capability of DFIG-based wind turbines during violent changes in grid voltage.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.949-952
• /
• 1996

The ultrasonic motor(USM) has good characteristics such as compact size, silent motion, low speed, high torque and high speed response. The USM is driven by 2-phase AC electricity. The control parameters of USM are voltage, phase difference, frequency of input power, etc. In this paper, we propose voltage difference control. And we designed USM controller to adjust voltage and phase using pLSI(programmable Large Scale Integration). Voltage difference control has many advantages that are lower current, lower power than phase difference control. Especially there is nearly zero ampere at the zero point of speed and torque. we can apply this voltage difference control to the compliance control of DD manipulator.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.41.1-41.1
• /
• 2010

A bipolar magnetic field perturbation in the meridional plane was observed when the Polar spacecraft crossed the plasmapause near the midnight, which was identified by a clear jump in density and temperature, from the plasmasheet to the plasmasphere. The bipolar variation shows a negative-then-positive polarity. To examine the bipolar magnetic field perturbation at the plasmapause, we assume one-dimensional model with physical quantities varying along a direction normal to the plasmapause and employ two-fluid approach for the tangential plasmapause. That is, the magnetic fields on both sides are parallel. Considering Ampere's law and pressure balance relation, we have a perturbed magnetic field, which is consistent with the observation at the plasmapause.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.396-404
• /
• 2010

This paper presents simple schemes used to estimate the initial rotor position and the d- and q-axis inductances for effective Maximum Torque per Ampere (MTPA) operation in a wind-power system using an IPMSM (Interior Permanent Magnet Synchronous Machine). An IPMSM essentially requires an exact coordinate transformation and accurate inductance values to use a reluctance torque caused by the saliency characteristic. In the proposed high-frequency voltage testing method, there is no voltage drop caused by the resistance and the electromotive force. The initial rotor position and the inductance can be measured through an analysis of the stator current without turning the rotor. The experimental results are presented in order to illustrate the feasibility of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.271-272
• /
• 2012

전류 적산법(Coulomb counting, ampere counting)을 이용한 배터리 SOC(State-of-Charge) 추정 방법은 상용화된 IC를 사용할 수 있기에 구현이 간단하고 SOC 정의를 통해 배터리 사용 가능한 시간을 쉽게 예측할 수도 있다. 하지만 초기 SOC 오류와 누적되는 전류 정보의 오차로 인해 추정이 실패하는 단점이 존재하기 때문에 이를 해결해주는 알고리즘이 필요하다. 본 논문에서는 전류 적산법 기반의 배터리 SOC 추정 회로에 확장 칼만 필터(EKF, Extended Kalman Filter)를 접목하여 전류 적산법을 이용하였을 때 나타날 수 있는 오차 누적을 줄이는 알고리즘을 제안한다. 또한 실험을 통해 제안된 배터리 SOC 추정 회로의 성능을 확인해본다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.299-300
• /
• 2012

본 논문에서는 납 축전지를 사용하는 산업용 전기차량의 SOC(State Of Charge)를 별도의 BMS(Battery Management System)장치 없이 추정하는 방법에 대해 기술한다. SOC를 추정하기 위한 기존의 전통적인 방법들 중 전력을 적산하는 방법(Ampere hour counting)이 널리 사용되는데 이는 장치의 내, 외적인 요인에 의해 발생한 오차가 누적될 수 있다. 배터리의 전압을 측정하여 SOC를 추정하는 OCV(Open Circuit Voltage) 방법은 배터리가 안정 상태에 도달하기까지 충분한 휴지 시간이 필요해 실시간으로 적용하기 힘들다. 이 외에 칼만 필터를 이용하는 방법은 시스템을 정확히 모델링해야 하고 계산이 복잡하다는 단점이 있다. 본 연구에서는 전력을 적산하는 방법을 기본으로 하고 배터리의 전압을 적절히 이용하여 누적되는 오차를 보정하는 방법을 제안한다. 제안한 방법에 대해 시뮬레이션 하고 실제로 산업용 차량인 AC 전동 지게차로 실험하여 그 타당성을 검증 하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.136-140
• /
• 2017

The state of charge (SOC) is an important parameter in a battery-management system (BMS), and is very significant for accurately estimating the SOC of a battery. Li-ion batteries boast of excellent performance, and can only remain at their best working state by means of accurate SOC estimation that gives full play to their performances and raises their economic benefits. This paper summarizes some measures taken in SOC estimation, including the discharge experiment method, the ampere-hour integral method, the open circuit voltage method, the Kalman filter method, the neural network method, and electrochemical impedance spectroscopy (EIS. The principles of the various SOC estimation methods are introduced, and their advantages and disadvantages, as well as the working conditions adopted during these methods, are discussed and analyzed.