• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.177-182
• /
• 2017

The properties of electroless Ni-B thin film on diamond powder with different parameters (temperature, pH, surfactant etc.) were studied. The surface morphology, structure and composition distribution of the Ni-B film were observed by field effect scanning electron microscope (FE-SEM), energy-dispersive spectrometer (EDS), X-ray diffraction (XRD) and Auger electron spectroscopy (AES). The growth rate of Ni-B film was increased with increase of bath temperature. The B content in Ni-B film was reduced with increase of bath pH. As a result the structure of Ni-B film was changed from amorphous to crystalline structure. The PVP in solution plays multi-functional roles as a dispersant and a stabilizer. The Ni-B film deposited with adding 0.1 mM-PVP was strongly introduced an amorphous structure with higher B content (25 at.%). Also the crystallite size of Ni-B film was reduced from 12.7 nm to 5.4 nm.

• Journal of Magnetics
• /
• 제7권4호
• /
• pp.160-164
• /
• 2002

A new discovery of the super-giant magneto-impedance (SGMI) effect was found out in a LC-resonator consisted of a glass-coated amorphous $CO_{83.2}B_{3.3}Si_{5.9}Mn_{7.6}$ microwire. The measurement was carried out at high frequency range from 100 MHz up to 1 GHz of an ac-current flowing along the wire and at varying axial dcmagnetic field in its range of $\pm$120 Oe. The wires, about 16${\mu}m$ in diameter, were fabricated by a glass-coated melt spinning technique. The shape of the impedance curves plotted vs. a dc-field is changing dramatically with the frequency. The phase angle was also strongly dependent on this field. The external dc-magnetic field changes the circumferential permeability as well as the penetration depth, both in turn change the impedance of the sample. The drastic increments of SGMI at high frequency can be understood in terms of the LC-resonance phenomena. The sudden change of the phase angle, as large as $180^{\circ}$ evidenced the occurrence of the resonance at a given intensity of the external dc-field. The maximum ratio of SGMI reached in the experiment by precise tuning frequency equals 450,000％ at the frequency of around 551.9075 MHz.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2003년도 춘계학술논문발표회논문집
• /
• pp.164-170
• /
• 2003

In this paper, we studied on the firing characteristics and electrical fire analysis of power cord deteriorated by thermal stress. The cross section of PVC insulating cord deteriorated by indirect flame decreased through heat convection. PVC insulating cord deteriorated by direct flame was bumpy shape. The exothermic peak of normal cord was shown at ($526.7^{\circ}C$), but the peaks or on(heat treatment temperature) ($150^{\circ}C$) cord was shown at ($299.6^{\circ}C$) and [$502.2^{\circ}C$]. The exothermic peaks according to high temperature were similar to those of amorphous carbon. In the FT-IR analysis, the absorption peak of normal cord indicated double bond of oxygen and carbon in benzene ring at 1720.0$cm^{1}$. As the HTT was high, the height of characteristic peak decreased and the peak of carbonyl group was shown at about 1625.7$cm^{-1}$. The characteristic peak of single bond(O-H) was shown at about 3479.2$cm^{-1}$. In case of the internal part of wire covering deteriorated by over current, the characteristic peak were shown at about 3417.3$cm^{-1}$ and 1600.2$cm^{-1}$. The above results show that we can distinguish the differences according to the fire pattern through the internalㆍexternal analysis of wire covering deteriorated by heat.

• 대한전자공학회논문지SD
• /
• 제37권8호
• /
• pp.17-27
• /
• 2000

열선 CVD(Hot Wire CVD)를 이용해 유리기판에 미세결정 실리콘(${\mu}c$ -Si:H) 박막을 증착시키고, 증착 조건에 따른 막의 특성변화를 관찰하였다. 열선 CVD법에 의한 ${\mu}c$ -Si:H막의 증착률은 조건변화에 따라 0.2nm/sec에서 3.5nm/sec사이의 값을 가졌으며, 기존의 PECVD법에 비해 10배 이상 높은 값이었다. Raman 특성으로부터 ${\mu}c$ -Si:H막은 비정질과 결정질의 두상이 혼합된 상태임을 알 수 있었으며, 평균 결정 립의 크기는 6-10nm, 결정체적분율은 37~63%범위였다. 막의 전도대와 Fermi 준위의 차를 나타내는 전도 활성화에너지(conductivity activation energy)는 30mTorr에서 0.22eV로 나타났으며, 압력에 따라 증가하여 300mTorr에서는 0.68eV의 값을 가졌다. 막의 활성화 에너지 증가는 높은 압력에서 증착된 막의 특성이 진성(intrisic)에 가까움을 의미하며, 이는 압력증가에 따른 암 전도도의 감소특성으로부터 확인할 수 있었다. 또한 이차이온질량분석으로부터 열선온도 1800$^{\circ}C$에서 증착시킨 막의 텅스텐 함유량은 $6{\times}10^{16}atoms/cm^3$임을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.58.2-58.2
• /
• 2010

본 연구에서는 n-type wafer에 비정질 실리콘을 증착한 이종접합 태양전지를 열처리 방법을 이용하여 열처리의 효과를 분석함으로써 이종접합 태양전지에 효율적인 열처리 효과에 대하여 연구하였다. P, N-layer는 PECVD(Plasma-enhanced chemical vapor deposition) I-layer는 HWCVD(Hot wire chemical vapor deposition), ITO는 RF 마그네트론 스퍼터링법으로 동일한 조건에서 제작하였고 rapid thermal process를 이용하여 진공 중에서 $150^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$, $250^{\circ}C$까지 열처리를 하였다. 열처리 전과 후 QSSPC로 minority carrier life time, 자외 가시선 분광분석 장치로 투과 반사도를, Ellipsometer로 흡수 계수 등의 변화를 조사하였다. 열처리 후 Minority carrier life time, Voc 및 광변환 효율이 증가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.129.2-129.2
• /
• 2011

본 연구에서는 a-Si:H/c-si 구조의 이종접합 태양전지의 p a-Si:H 에미터 층의 박막 조건에 따라 태양전지 특성을 연구하였다. p, n-layer는 PECVD (Plasma-enhanced chemical vapor deposition) i-layer는 HWCVD(Hot wire chemical vapor deposition), ITO는 RF 마그네트론 스퍼터링법으로 제작하였다. p-layer의 도핑 농도, 기판 증착 온도, 증착 높낮이에 따라 특성을 비교 분석 하였다. QSSPC로 minority carrier life time, 자외 가시선 분광분석 장치로 투과 반사도를, Ellipsometer로 흡수 계수, 두께, FTIR로 막의 구성요소 등의 변화를 조사하여 개선된 p a-Si:H의 특성이 이종접합 태양전지에서 효율향상에 영향을 주는지 Photo IV와 EQE를 통하여 조사하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.101-101
• /
• 2015

Photoelectrochemical water splitting is considered as a promising method of transforming solar energy into chemical energy stored in the type of hydrogen. An n-type $WO_3$ semiconductor is one of the most promising photoanodes for hydrogen production from water splitting. Films annealed at lower temperatures consisted of amorphous, whereas films annealed above $500^{\circ}C$ comprised solely of monoclinic $WO_3$. In this study, we observed photoactivity of $WO_3$ as increasing thickness of $WO_3$. And it shows good photoacivity as thickness increases. Also we tried to improve photoactivity through surface modification and bulk modification by using hydrogen treatment and conducting polymer. The photocurrent was measured in potentiostatic method with the three electrode system. A Pt wire and Ag / AgCl electrode were used as the counter electrode and the reference electrode, respectively. photocurrent-time (I-T) curve was measured at a bias potential of 0.79 V.

• 한국방사선학회논문지
• /
• 제8권5호
• /
• pp.225-230
• /
• 2014

엑스선 의료영상이 디지털 시스템으로 발전함에 따라 의료영상의 평가 방법 또한 디지털 시스템에 맞춰 새롭게 개선되었으며 그 중 MTF(Modulation Transfer Function) 측정법은 Fujita이론에 기초한 에지법으로 ISO에 규정되었다. 에지법의 기초인 Fujita이론은 MTF 측정을 위해 슬릿의 각도를 디지털 검출기의 픽셀 열에 대하여 $1^{\circ}{\sim}2^{\circ}$ 기울여 영상을 획득한 후 LSF를 합성하는 것으로 샘플링 간격은 각도에 따라 크게는 1/54배, 작게는 1/28배 감소하게 된다. 본 연구에서 사용된 장비는 Simens사의 MAMMOMAT Inspiration으로 비정질 셀레늄(amorphous selenium) 기반의 $0.085{\times}0.085mm^2$ 의 픽셀 사이즈를 갖는 검출기를 이용하여 presampling MTF를 측정하였다. 측정 방법은 Fujita의 슬릿법와 동일한 방법인 와이어법를 이용하였으며 측정된 영상에서 얻은 픽셀값을 이용하여 엑셀에서 이산 푸리에 변환을 시행하였다. 실험 결과 Fujita이론 대비 약 3배 이상의 샘플링 간격(sampling interval)의 경우 해상도 평가 지수인 10% MTF에서 약 85% 이하의 정확도를 보였으며 선예도 평가 지수인 50% MTF에서 약 93% 이하의 정확도를 나타내었다. 하지만 샘플링 간격이 Fujita 이론 대비 2배 정도 늘어난 경우는 50%와 10% MTF 모두 96% 이상의 정확도를 가진다는 것을 알 수 있었다.

• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.401-406
• /
• 2008

최근 바이오센서, 비파괴진단, 방위센서 등 다양한 분야에서 휴대가 가능하며 감도가 높은 자기센서에 대한 요구가 증대되고 있다. 연자성 리본의 거대 자기임피던스 효과를 이용한 새로운 휴대용 고감도 자기임피던스 센서 시스템을 개발하였다. 자기임피던스 센서는 $Co_{66}Fe_{4}Si_{15}B_{15}$ 연자성 비정질 리본을 공기중에서 자기장 열처리하는 방법으로 교환결합을 발생시켜 비대칭 자기임피던스 특성을 부여한 센서용 헤드와 신호처리 회로로 구성되었다. 개발된 센서는 $-1\;Oe\;{\sim}\;1\;Oe$의 다이나믹 레인지에서 선형에 가까운 특성을 보였으며 자기장 민감도는 약 10.5 V/Oe 였다. 자기임피던스 센서 시스템이 와이어로프의 결함 진단 장치에 응용될 수 있음을 보였다.