• Resources Recycling
• /
• v.17 no.1
• /
• pp.38-42
• /
• 2008

This study was carried out to investigate the solubility of vanadium in ammoniacal solution and precipitation of $NH_4VO_3$ as a function of temperature and addition of ammonia salt. Higher solution temperature is required to get high solubility of vanadium and the vanadium concentration of solution was 16.8g/L at $90^{\circ}C$ with the solution of 20 g/L $(NH_4)_2CO_3$ and 2.5M $NH_4OH$. From this solution, vanadium could be precipitated up to 99.8% with adding 20 g/L $NH_4Cl$, 72 hours settling time at $25^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.686-694
• /
• 1999

Insoluble anodes of the Ta/Ir mixed metal oxide for electrodeposition of Ni-W alloy in ammoniacal citrate bath were prepared by thermal decomposition method. Ti plate was etched in boiling oxalic acid solution and coated with ethanol solution of $TaCl_{5}$ and $IrCl_4$ mixed in a fixed ratio, followed by drying and treating at various temperatures. The coating layer of these insoluble anode was characterized by SEM, EDX, XRD and DSC. The decomposition rate of citric acid in plating bath was determined by measuring the $CO_2$ gas evolved at the anodes with Gas Chromatography. Evolution of $CO_2$ gas from Ta/Ir oxide anodes decreased about 5% compared with that of Pt. The $CO_2$ gas evolution was increased with the amount of Ir-oxide in the coatings. The coatings which have more than 40% ratio of Ta content and heat-treated at the temperature higher than $400^{\circ}C$ showed better efficiency

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.197-197
• /
• 2005

• Journal of Powder Materials
• /
• v.4 no.2
• /
• pp.106-112
• /
• 1997

$Cu-Al_20_3 $ composite powders were prepared by hydrogen reduction of $Cu^{2+}$ from ammoniacal copper sulfate solution on alumina core using autoclave. The copper reduction rate and the properties of copper layer were investigated using Scanning Electron Microscope(SEM), X-ray diffractometer, size and chemical analyzers. The reduction rate of $Cu^{2+}$ showed the maximum value when the molar ratio of [$NH_3$]/[$Cu^{2+}$] was 2. In order to prevent the agglomeration of Cu powder and ethane reduction rate, $Fe^{2+}$ and anthraquinone which act as catalysis were added in the solution. Catalysis was effectively chanced with the addition of two elemerts at a time. Optimum conditions obtained in this study were hydrogen reduction temperature of 205$^{\cire}C$, stirring speed of 500 rpm and hydrogen partial pressure of 300 psi. Obtained $Cu-Al_20_3 $ composite Powders were found to have the uniform and continuous copper coating layer of nodule shape with 3~5 $\mu$m thickness.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.395-404
• /
• 1994

Ni-graphite composite powders were prepared by reduction of $Ni^{++}$ from ammoniacal nickel sulfate solution on graphite core by hydrogen gas. Effect of reaction factors on the reduction rate and the properties of nickel layer were investigated by SEM, Optical Microscopy, size and chemical analysis. Induction period, a time lag between the injection of hydrogen gas and the start of the reduction, was 20~110 mins and affected by the reaction temperature and stirring speed. The reduction rate of $Ni^{++}$ was $4.5g/{\ell}/min$ at optimum condition and increased with increasing reaction temperature and stirring speed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1225-1226
• /
• 2006

Particles of high strength material when coated with silver offer a means of obtaining desirable electrical properties and high strength. The coating process employed aqueous ammoniacal silver-nitrate electrolytes with a formaldehyde solution as the reductant. Modifying additives were also applied. The reduction and subsequent deposition of silver occurred selectively on the surface of the tungsten particles. The morphologies of the coated particles were assessed by SEM imaging. The silver was uniformed coated on tungsten powder and its thickness was estimated to be approximately 100nm on the basis of a mass account.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.671-676
• /
• 1988

Preparation of high purity ultrafine Ba2Ti9O20 powder was investigated by coprecipitation method. Formation of Ba2Ti9O20 powder from precipitate of coprecipitation takes place at 120$0^{\circ}C$, which is 20$0^{\circ}C$ lower than that from mechanical mixtures of BaCO3 and TiO2. This is apparently due to the nature of the compounds formed by the reaction of mixtures of aqueous solutions of BaCl2 and TiCl4 with an ammoniacal solution of ammonium carbonate and ammouium hydroxide. In this method, the Ba2Ti9O20 powders show low callcining and sintering temperature and it has good sintering and dielectric constant at room temperature.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.107-114
• /
• 1983

Formation of Strontium titanate from the products of coprecipitation takes place at 110$0^{\circ}C$ which is 200-30$0^{\circ}C$ lower than that from mechanical mixtures of $SrCO_3$ and $TiO_2$. This is apparently due to the nature of the compounds formed by the reaction of mixtures of aqueous solutions of $SrCl_2$ and $TiCl_4$ with an ammoniacal solution of ammoni-um carbonate and ammonium hydroxide. A procedure is described for preparing strontium titanyl oxalate tetrahydrate in the several mole ratio of $TiCl_4$ to $SrCl_2$. STrontium titanyl oxalates decompose to titanate at elevated temperature. The coprecipitates and the fired specimen were subjected to examined thermal and X-ray analyses and microstruc-ture by SEM.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.147-166
• /
• 2022

Liquid-liquid membrane contactor (LLMC), a device that exchanges dissolved gas molecules between the two sides of a hydrophobic membrane through membrane pores, can be employed to extract ammoniacal nitrogen from a feed solution, which is transported across the membrane and accumulated in a stripping solution. This LLMC process offers the promise of improving the sustainability of the global nitrogen cycle by cost-effectively recovering ammonia from wastewater. Despite recent technological advances in LLMC processes, a comprehensive review of their feasibility for ammonia recovery is rarely found in the literature. Our paper aims to close this knowledge gap, and in addition to analyze the challenges and provide potential solutions for improvement. We begin with discussions on the operational principles of the LLMC process for ammonia recovery and membrane types and membrane configurations commonly used in the process. We then assess the performance of the process by reviewing publications that demonstrate its practical application. Challenges involved in the implementation of the LLMC process, such as membrane fouling, membrane wetting, and chemical requirements, are presented, along with discussions on potential strategies to address each. These strategies, including membrane modification, hybrid process design, and process optimization based on cost-benefit analysis, guide the reader to identify key areas of future research and development.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.447-451
• /
• 1999

Silver has the highest electrical conductivity of all metals and consequently this property is an attractive feature which makes it a leading candidate for use in electronic devices. The research conducted was focused primarily on the development of a process for obtaining a deposited silver-coating onto alumina, for applications related to electrical-conducting devices and, ancillarily, catalysts. Alumina balls and plane substrates were utilized for the investigation. The coating process employed an aqueous ammoniacal silver-nitrate electrolytes with a formaldehyde solution as the reductant. Modifying additives-an activator which would be expected to promote good deposition-characteristics onto the (dielectric) substrate and an inhibitor which would obviate homogeneous reduction (precipitation) of silver was observed when the activator-containing silver-electrolyte reductant constituents were combined. However, the silver-electrolyte/reductant system with inhibitor could be employed (at 8$0^{\circ}C$) to achieve a viable (subject to future research optimization) coating on alumina. The influence of the processing temperature on the deposition process was delineated during the course of the research. The morphology of the deposited-silver on the alumina balls was assessed by SEM imaging. A tape-peel test was employed, with the plane substrates, to semi-quantitatively characterize the adhesion to the alumina.