• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.405-412
• /
• 2005

In this paper, we verified the failure mechanism of the discolored masking tape wrapped around the wire and studied an improved case study as well. Masking tapes are poly(Vinylchloride-co-Methyl methacrylate) (PVC) and the wire connecting with indoor/outdoor components of the air conditioner is chloroprene(CR). The masking tape under. the ultraviolet ray was accelerated to discolor fivefold. The results determined reveal the discoloration of masking tapes as an elution of the additives, dephenyl Amine series antioxidants, in the connecting wire. When changed dephenyl Amine series to phenol series, we found that the degree of discoloration was dramatically decreased. Due to stink of Thiourea and Thiuram monosulfide, as accelerators in CR wire, we controlled the vulcanization temperature and time without using these accelerators and could get the wire not to smell bad with the equal mechanical properties.

• 분석과학
• /
• 제11권6호
• /
• pp.469-473
• /
• 1998

자동차용 휘발유 제조사의 확인 또는 판별은 석유류의 정상적인 유통관리 및 오염사고시 오염원의 추적을 위해 필요하다. 일반적으로 휘발유의 화학적 조성은 가스크로마토그래피(GC)로 분석이 가능하며, 제품별로 얻어진 크로마토그램의 차이로부터 각 제품을 구분할 수 있으나 제조기준의 세분화로 휘발유의 조성이 유사해져 GC분석에 의한 판별이 더욱 어렵게 되었다. 본 연구에서는 보다 신속하고 정확하게 휘발유 제품을 판별하기 위하여, 분산제의 적외선 분광스펙트라를 비교하여 제조사(A, B, C, D, E사로 구분)를 구분하는 방법을 도식화하였다. IR spectra는 휘발유를 검시험기(gum tester)로 증발시키고, 잔여물을 n-pentane으로 녹여 ATR(Attenuated Total Reflectance) cell로 옮기고 다시 용매를 증발시킨 후에 얻었다. 'A', 'B', 및 'C'정유사에서 사용하는 첨가제들은 에테르(ether)의 C-O 신축진동에 의한 넓고 강한 피크가 $1,096cm^{-1}$에서 나타나 'D'와 'E'정유사의 첨가제들과 뚜렷하게 구별이 가능하였고, 또 다른 특징적인 피크들로써 각 정유사 제품의 구분이 모두 가능하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.15.1-15.1
• /
• 2006

• 멤브레인
• /
• 제14권3호
• /
• pp.207-217
• /
• 2004

본 연구에서는 복합막의 제조공법으로 가장 광범위하게 쓰이는 계면중합법을 이용하여 나노복합막을 제조하였다. Monomer의 농도 및 조성, curing 조건, 후처리 조건과 같은 복합막 제조조건과, 운전압력, 공급액의 농도와 같은 운전인자에 의한 막성능 변화를 조사하였고, 계면중합 과정중에 첨가제를 사용하여 막의 유효면적을 확대하여 투과유속을 증가시키고자 하였다. Monomer의 농도가 증가함에 따라 배제능은 일정하였지만 투과유속이 감소하였고, curing 온도가 증가함에 따라서는 오히려 안정적인 박막층의 형성이 저해되어서 배제능과 투과유속이 모두 감소하였고, curing 시간에 따른 막성능의 변화는 나타나지 않았다. Test solution의 농도가 올라감에 따라서 투과유속과 배제능 모두 감소하였으며, 운전압력이 증가함에 따라서는 배제능과 투과유속 모두 향상하는 경향을 보였다. 계면중합과정중에 사용하는 아민단량체(amine monomer) 중 방향족 다이아민(aromatic amine)인 MPD의 함량을 높임에 따라서 배제능은 증가하였지만 투과유속은 현저하게 떨어졌다. 첨가제의 농도에 따른 표면 거칠기 증가 경향은 MPD가 포함된 amine 조성일 때가 더 높았지만 투과유속은 piperazine만 단독으로 사용하였을 때보다 떨어졌다.

• 대한환경공학회지
• /
• 제27권3호
• /
• pp.280-285
• /
• 2005

화학흡수법은 $CO_2$와 $H_2S$와 같은 산성가스를 분리 회수하기 위한 유리한 방법으로 제시되어 왔다. 그러나, 이 방법은 열화에 의해 아민의 분해가 일어나고, 부식이나 오염과 같은 운전상의 문제들을 가지고 있다. 따라서, 본 연구에서는 AMP의 흡수능 향상을 위하여 사용하는 첨가제(HMDA, MDEA, piperazine)가 함께 존재하는 AMP 수용액에 대하여 온도(120, 160, $200^{\circ}C$)와 시간(30, 20, 7일간)에 따른 열화현상을 관찰하였다. $CO_2$와 $H_2S$를 각각 흡수시킨 AMP는 $120^{\circ}C$에서 30일간 경과시 순수 AMP에 비하여 105% 23% 더 열화되며, 첨가제 모두 온도 증가에 따라 급격히 열화되어 그 농도가 크게 감소하였다. $CO_2$를 흡수시킨 AMP 수용액의 경우 각 첨가제의 열화되는 양은 HMDA > piperazine > MDEA 순으로 나타나 MDEA가 열화에 가장 안정적임을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.185-189
• /
• 2009

10 wt% 암모니아수 흡수제에서 이산화탄소 흡수속도를 교반셀 반응기를 이용하여 293~337 K 범위에서 측정하였다. 암모니아 흡수제와 이산화탄소의 반응속도를 아레니우스 식으로 나타내었으며 활성화에너지는 50.42 kJ/mol였다. 2-Amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD), 2-amino-2-ethyl-1,3-propandiol(AEPD)의 입체장애아민 첨가제가 1 wt% 함유된 흡수제에서의 이산화탄소 흡수속도를 측정하였다. 아민 첨가제들은 흡수속도에 영향을 주었으며 1 wt%의 AMP를 첨가한 경우 반응속도 상수는 약 53% 증가하였다.

• Mass Spectrometry Letters
• /
• 제3권1호
• /
• pp.25-28
• /
• 2012

Paint Spray is developed as a direct sampling ionisation method for mass spectrometric analysis of additives in polymer-based surface coatings. The technique simply involves applying an external high voltage (5 kV) to the wetted sample placed in front of the mass spectrometer inlet and represents a much simpler ionisation technique compared to those currently available. The capabilities of Paint Spray are demonstrated herein with the detection of four commercially available hindered amine light stabilisers; TINUVIN${(R)}$770, TINUVIN${(R)}$292, TINUVIN${(R)}$123 and TINUVIN${(R)}$152 directly from thermoset polyester-based coil coatings. Paint Spray requires no sample preparation or pre-treatment and combined with its simplicity requiring no specialised equipment makes it ideal for use by non-specialists. The application of Paint Spray for industrial use has significant potential as sample collection from a coil coating production line and Paint Spray ionisation could enable fast quality control screening at high sensitivity.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.67-75
• /
• 2014

Biodiesel as alternative fuels has been widely studied due to biodiesel merits such as lower sulfur, lower aromatic hydrocarbon and higher oxygen content. But biodiesels could be easily oxidized by several conditions. In this study, various antioxidants such as propyl gallate, TBHA, TBHQ, DTBHQ, butyl-amin, aniline and pyrogallol were added in the biodiesel produced by the used cooking oil, then the material property test and the vehicle emissions test were conducted in accordance with test method. From the results of material property test, all antioxidants were suitable for the quality standard of density and kinematic viscosity, but Propyl gallate and Pyrogallol, as a type of Gallate additives, showed that the result of TAN increased rapidly according to the increase of the amount of additives. In the oxidation stability test, TBHQ, Butyl-amine and Aniline showed the excellent oxidation stability. Also, when considering the material property test, TBHQ was verified to the most excellent additives. In case of the vehicle emissions test, the testing was conducted by using the biodiesel added by TBHQ and was conducted by using two light duty diesel vehicles suitable for the EURO 4 and EURO 5 emission regulation. The result of testing showed that when the TBHQ was added, the amounts of CO, NOx and NMHC+NOx were decreased but the amount of $CO_2$ was increased.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.22-28
• /
• 2017

The result of stripping process for the removal of the post etch/ash Photoresist (PR) residue on an aluminum patterned wafer by using supercritical $CO_2$ ($sc-CO_2$) mixture, was investigated by scanning of electron microscope (SEM) inspection of wafer, measuring the cloud points and visual observation of the state of $sc-CO_2$ mixtures. It was found that $sc-CO_2$ mixtures were made by mixing additives and $sc-CO_2$ should form homogeneous and transparent phase (HTP) in order to effectively and uniformly remove the post etch/ash PR residue on the aluminum patterned wafer using them. The additives were formulated by mixing and co-solvents like an amine compound and fluorosurfactants used as HTP agents, and the PR residue on the wafer were able to be rapidly and effectively removed using the $sc-CO_2$ mixture of HTP. The five kinds of additives were formulated by the recipe of mixing co-solvents and surfactants, which were able to remove PR residue on the wafer by mixing with $sc-CO_2$ at the stripping temperature range from 40 to $80^{\circ}C$. The five kinds of $sc-CO_2$ mixtures which were named as PR removers were made, which were able to form HTP within the above described stripping temperature. The cloud points of $sc-CO_2$ mixtures were measured to find correlation between them and HTP.

• 한국재료학회지
• /
• 제15권10호
• /
• pp.678-682
• /
• 2005

We studied the possibility of $Zn_4O(Ac)_2(OH)$ formation as a precursor for ZnO nano particles in sol-gel method. Four different additives such as tetra methyl ammonium hydroxide, mono ethanol amine (MEA), LiOH, and $H_2O$ were used for zinc acetate dissolved in 2-methoxy ethanol. ZnO particles of 5-6 nm in size were observed. Existence of $Zn_4O(Ac)_6$ was not verified. $Zn_4O(Ac)_2(OH)$ molecules were observed and they were believed to be the precursors of ZnO. A peak at 275nm in UV-Vis analysis was observed In the case of MEA and $H_2O$ but no ZnO particles were detected in transmission electron microscopy.