• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.195-201
• /
• 1994

The potential ability of the Applebaum type adaptive array to suppress the multipath signals is examined. The output Signal-to-Noise Ratio is expressed in terms of (1) the input SNR. (2) relative multipath signal amplitude, and (3) ambient noise when a multipath component is present Computer simulation is done on several performance measures to learn that the performance of the array depends upon the magnitude and the phase of the correlation coefficient. It is also shown that the performance is maximized when the phase of the correlation coefficient is zero degree.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.76-77
• /
• 2009

This paper is concerned with the development of the piezoelectric energy harvesting(PEH) device using Wind. In this study, the piezoelectric energy harvesting system consisting of a cantilever with a pinwheel and piezoelectric wafer was investigated in detail both theoretically and experimentally. The power output characteristics of the PEH was then calculated and discussed. Theoretical and experimental results showed that the PEH was able to charge a battery with ambient vibrations but still needed an effective mechanism which can convert mechanical energy to electrical energy and an optimal electric circuit which dissipates small energy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.369.1-369
• /
• 2002

In order to verify the effectiveness of adding viscoelastic dampers to full-scale steel frame structure on the reduction of their seismic and wind response, a experimental work was carried out. First, The test was conducted on the VE dampers subjected to sinusoidal excitations under a variety of ambient temperatures, frequency, and the damper strain. Results from these tests showed that the viscoelastic dampers have high energy dissipation capacity Second, (omitted)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.12
• /
• pp.938-946
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximizeloss factor using a numerical search method. The fractional derivative model can describe damping characteristics of viscoelastic damping materials accurately, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kelvin[RUK] equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are identified with ambient temperatures and thickness ratios of beam and damping layer by using a finite-difference-based steepest descent method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.3
• /
• pp.294-300
• /
• 2009

In high speed railway bridges, dynamic analysis is important because of high passing velocity and moving load at the regular intervals, and damping ratio is a major parameter to predict dynamic responses. In this paper, damping ratios were estimated by using half power band width method and extended Kalman filter according to acceleration signal conditions, and a relationship between estimated damping ratios and representative values of bridge vibration was derived. From the results, damping ratios estimated from total ambient vibration were more reliable than only free vibration part. In case of using extended Kalman filter, the estimated damping ratios varying with RMQ(root mean quad), as one of representative values of bridge vibration, have more feasible trend. Thus, it is shown that further studies on reliabilities of estimated damping ratios are needed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.665-671
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximize loss factor using a numerical search method. The fractional derivative model can describe damping characteristics of the viscoelastic damping material, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kerwin(RUK) equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are obtained with respect to ambient temperatures and thickness ratios of beam and damping layer.

• Speech Sciences
• /
• v.4 no.2
• /
• pp.41-54
• /
• 1998

Speech signals are, depending on the characteristics of waveform, classified as voiced sound, unvoiced sound, and silence. Voiced sound, produced by an air flow generated by the vibration of the vocal cords, is quasi-periodic, while unvoiced sound, produced by a turbulent air flow passed through some constriction in the vocal tract, is noise-like. Silence represents the ambient noise signal during the absence of speech. The need for deciding whether a given segment of a speech waveform should be classified as voiced, unvoiced, or silence has arisen in many speech analysis systems. In this paper, a voiced/unvoiced/silence classification algorithm using spectral change in the wavelet transformed signal is proposed and then, experimental results are demonstrated with our discussions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.710-715
• /
• 1994

The program name TOLAPS is an acronym for Take-Off LAnding Profile Simulation. Some of the interesting features of this program is the ability to detect flight performance effects of airport altitude, ambient temperature, air pressure and wind. TOLAPS can also handle effects of TOW and LW. The program user can also calculate profiles by user difined flaps and thrust settings deviating from recommended standard settings for each aircraft. Wind effects on straight out flying as well as turns can also be demonstrated. Output form TOLAPS are either screen graphics of profiles (altitude, speed or thrust versus flight distance) or flight track. Profiles can also be made in a tabular form, ready for use in most airport noise calculation programs. In this way, TOLAPS is a valuable tool to evaluate effects of noise abatement procedures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.434-441
• /
• 2003

This paper presents a generator for stand-alone vibration monitoring system of bridge structure based on ambient vibration of bridge. In this paper, a novel electric power generator which has minimum effect of armature reaction is proposed. The related mechanical and electrical design equations are obtained and a pilot generator has been implemented. In addition, the charging system for extremely low generator current is discussed, and some improvements are identified for the system. This investigation reveals that diode characteristics of rectifier is dominant factor in the charging process. Finally, both the simulation, which uses real measurement data of the Namhae bridge as input of the pilot generator, and indoor test are carried out. The results showed the applicability and effectiveness of the stand-alone vibration powered generator.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3E
• /
• pp.12-18
• /
• 2000

Psychoacoustic model based methods have recently been introduced in order to enhance speech signals corrupted by ambient noise. In particular, the perceptual filter is analytically derived where the frequency content of the input noisy signal is made the same as that of the estimated clean signal in auditory domain. However, the analytical derivation should rely on the deconvolution associated with the spreading function in the psychoacoustic model, which results in an ill-conditioned problem. In order to cope with the problem associated with the deconvolution, we propose a novel psychoacoustic model based speech enhancement filter whose principle is the same as the perceptual filter, however the filter is derived by a constrained optimization which provides solutions to the ill-conditioned problem. It is demonstrated with artificially generated signals that the proposed filter operates according to the principle. It is shown that superior performance results from the proposed filter over the perceptual filter provided that a clean speech signal is separable from noise.