• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.231-240
• /
• 2005

The number of cases exceeding environmental standards of atmospheric ozone in the major cities in Korea has steadily increased during the past decades. In order to understand and analyze the atmospheric reactions in the atmosphere, especially the secondary photochemical reactions, smog chambers studies have been performed very actively by many research groups worldwide. However, these studies have focused on the mechanism of photochemical reactions in high concentration conditions, not at the ambient levels. Therefore, in-depth studies in these conditions are essentially needed to realize exact mechanism in the atmosphere near the earth surface, especially at Korean atmospheric conditions. In this experiment, the mechanism of photochemical smog was examined through a comparative experiment of smog chambers under sun light and black light conditions. The results of our study indicated that concentrations of ozone, aldehyde, and PAN increased as the radiation of light source increases. Photochemical reaction patterns can be considered quite similar for both black light and sun light experiments. Based on our experiments using toluene as a reactant which is present at significant high levels in ambient air relative to other VOCs, it was found that toluene could contribute notably to oxidize NO to $NO_2$, this reaction can eventually generate some other photochemical oxidants such as ozone, aldehyde, and PAN. The results of simulation and experiments generally showed a good agreement quite well except for the case of $O_3$. The restriction of oxidization of NO to $NO_2$ seems to cause this difference, which is mainly from the reaction of peroxy radical itself and other reactants in the real gas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.1-7
• /
• 2004

This experimental study investigates the wall display of shoes shops among the commercial space to suggest a desirable lighting by focusing on the lighting on the lighting surroundings. The important outcomes of this study are summarized below. The result of the experiment for the wall lighting: For the wall lighting, which needs a diversity, there should be various light source or bigger rate of illuminance between the ambient lighting and the local lighting. There is another possibility that is we can use the lower rate of illuminance with the ambient lighting and the local lighting or higher illuminance generally. The other wall lighting, which need a luminance and a emotional response, will be more effective as they take the lower rate of illuminance with the ambient lighting and the local lighting or higher illuminance generally.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.649-657
• /
• 2019

Recently, an advanced video deflectometer based on the principle of off-axis digital image correlation was presented and advocated for remote and real-time deflection monitoring of large engineering structures. In engineering practice, measurement accuracy is one of the most important technical indicators of the video deflectometer. However, it has been observed in many outdoor experiments that data drift often presents in the measured deflection-time curves, which is caused by the instability of imaging system and the unavoidable influences of ambient interferences (e.g., ambient light changes, ambient temperature variations as well as ambient vibrations) in non-laboratory conditions. The non-ideal unstable imaging conditions seriously deteriorate the measurement accuracy of the video deflectometer. In this work, to perform high-accuracy deflection monitoring, potential sources for the drift error are analyzed, and a drift error model is established by considering these error sources. Based on this model, a simple, easy-to-implement yet effective reference point compensation method is proposed for real-time removal of the drift error in measured deflections. The practicality and effectiveness of the proposed method are demonstrated by in-situ deflection monitoring of railway and highway bridges.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.277-280
• /
• 2004

Thin-film photosensors on organic light emitting diode (OLED) glass substrates using active-matrix OLED TFT manufacturing processes have been constructed and optimized, and their performance has been characterized. Suitable control circuitry and applications are proposed. The photosensors may be integrated into OLED displays for detection of ambient illumination and for detection of OLED light emission, thereby enabling output, uniformity, and aging compensation.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1941-1944
• /
• 2010

The heterojunction structures of BiOCl/$Bi_3O_4Cl$, exhibiting considerable visible-light photocatalytic efficiency, were prepared by a simple wet-chemical process at ambient condition. The prepared nanocomposites were characterized by XRD, TEM, and UV-visible diffuse reflectance spectra. Under visible light (${\lambda}\geq$420 nm) irradiation, BiOCl/$Bi_3O_4Cl$ exhibited an enhanced photocatalytic activity in decomposing 2-propanol (IP) in gas phase and salicylic acid (SA) in aqueous solution, whereas the bare BiOCl and $Bi_3O_4Cl$ showed negligible activities. It is deduced that the remarkable visible-light photocatalytic activity of the BiOCl/$Bi_3O_4Cl$ originates from the hole $(h^+)$ transfer between VB of the $Bi_3O_4Cl$ and BiOCl semiconductors.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.3-10
• /
• 2010

In the history of art and architecture, there are different characteristics in relationship between light and space. Among them, two characteristics seem to be fundamental : The first is that contrast between light and darkness is more articulated. Direct sunlight penetrates into the dark interior space made by heavy masonry structure. This is generally found in the traditional western religious buildings. The second is that light is mixed with darkness and becomes shade. Shade is different from shadow that is usually perceived as the opposite of light. Sunlight is filtered under through the big horizontal roof and rice paper walls in the traditional far-east Asian architecture and becomes weak ambient light. In this shade, there is no strong contrast between light and darkness. This difference is not only originated from the architectural differences, but also originated from the conceptual differences about light, space, and the world in two cultures. This paper tries to study the philosophical, aesthetical backgrounds as well as case examples in art and architecture of two characteristics. Based on the case studies, this paper aims to analyze the main perceptual structure. Finding the relationship between light, space, and human body by making three dimensional models is the crucial analysis method of this research. Although in real life and experiencing the world, these two characteristics are not clearly separated, comparative study based on different cultures gives opportunity to think of diverse perspectives on light and space.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.203-207
• /
• 2009

We have investigated the effect of ambient gases on the structural, electrical, and optical characteristics of ITO thin films intended for use as anode contacts in OLED (organic light emitting diodes) devices. These ITO thin films are deposited by radio frequency (RF) magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at $300{^{\circ}C}$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.5 sccm to 5 sccm and from 0.01 sccm to 0.25 sccm, respectively. The intensity of the (400) peak in the ITO thin films increased with increasing $O_2$, flow rate whilst the (400) peak was nearly invisible in an atmosphere of Ar+$H_2$. The electrical resistivity of the ITO thin films increased with increasing $O_2$ flow rate, whereas the electrical resistivity decreased sharply under an Ar+$H_2$ atmosphere and was nearly similar regardless of the $H_2$ flow rate. The change of electrical resistivity with changes in the ambient gas composition was mainly interpreted in terms of the charge carrier mobility rather than the charge carrier concentration. All the films showed an average transmittance of over 80% in the visible range. The OLED device was fabricated with different ITO substrates made with the configuration of ITO/$\alpha$-NPD/DPVB/$Alq_3$/LiF/Al in order to elucidate the performance of the ITO substrate. Current density and luminance of OLED devices with ITO thin films deposited in Ar+$H_2$ ambient gas is the highest among all the ITO thin films.

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.97-103
• /
• 2003

Phytochrome controls diverse aspects of plant development in response to the ambient light conditions. HFRl, a basic helix-loop-helix protein, is required for a subset of phytochrome A (phy A)-mediated photo-responses in Arabidopsis. Here, we show that overexpression of HFR1-N105, but not the one of the full-length HFR1, confers exaggerated photo-responses. The transgenic plants overexpressing HFR1- N105 exhibited light-independence in a subset of photo-responses, including germination, de-etiolation, gravitropic hypocotyl growth, and blocking of greening. Overexpression of HFR1-N105 also caused constitutive light-responses in the expression of some light-regulated genes. In addition, the HFR1-N105 overexpressor showed hypersensitive responses under R and FR light, dependently on phyB and phyA, respectively. End-of-day far-red light response and petiole elongation were suppressed in the HFR1-N105 overexpressor plants. Together these results imply that overexpression of HFR1-N105 activated a branch of light signaling, supporting the hypothesis that transcriptional regulation in the nucleus would be the primary mechanism of light signaling in Arabidopsis. We discuss the biotechnological potential of the mutant bHLH protein, HFR1-N105 in regard to suppressed shade avoidance syndrome.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.519-524
• /
• 2009

This paper describes a new sensor system for 3D environment perception using stereo structured infrared light sources and a camera. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and two projected infrared light sources are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Two successive captures of the image with left and right infrared light projection provide several benefits, which include wider area of depth measurement, higher spatial resolution and the visibility perception.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.309-310
• /
• 2003

We have designed novel transreflective liquid crystal displays which utilize dielectric mirrors. The reflective and transmissive modes are operated in different wavelength regions. The displays have the advantages: (1) the brightness as a function of applied voltage is the same for both modes, (2) the backlight and ambient light are utilized efficiently.