DOI QR코드

DOI QR Code

Drift error compensation for vision-based bridge deflection monitoring

  • Tian, Long (School of Science, China University of Geosciences) ;
  • Zhang, Xiaohong (Institute of Solid Mechanics, Beihang University) ;
  • Pan, Bing (Institute of Solid Mechanics, Beihang University)
  • Received : 2019.06.05
  • Accepted : 2019.08.23
  • Published : 2019.11.25

Abstract

Recently, an advanced video deflectometer based on the principle of off-axis digital image correlation was presented and advocated for remote and real-time deflection monitoring of large engineering structures. In engineering practice, measurement accuracy is one of the most important technical indicators of the video deflectometer. However, it has been observed in many outdoor experiments that data drift often presents in the measured deflection-time curves, which is caused by the instability of imaging system and the unavoidable influences of ambient interferences (e.g., ambient light changes, ambient temperature variations as well as ambient vibrations) in non-laboratory conditions. The non-ideal unstable imaging conditions seriously deteriorate the measurement accuracy of the video deflectometer. In this work, to perform high-accuracy deflection monitoring, potential sources for the drift error are analyzed, and a drift error model is established by considering these error sources. Based on this model, a simple, easy-to-implement yet effective reference point compensation method is proposed for real-time removal of the drift error in measured deflections. The practicality and effectiveness of the proposed method are demonstrated by in-situ deflection monitoring of railway and highway bridges.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Adamczyk, M., Liberadzki, P. and Sitnik, R. (2018), "Temperature compensation method for digital cameras in 2D and 3D measurement applications", Sensors, 18(11), 3685. DOI: 10.3390/s18113685.
  2. Feng, D. and Feng, M.Q. (2017), "Experimental validation of cost-effective vision-based structural health monitoring", Mech. Syst. Signal Pr., 88, 199-211. DOI: 10.1016/j.ymssp.2016.11.021.
  3. Handel, H. (2008), "Compensation of thermal errors in vision based measurement systems using a system identification approach", Int. Conf. Sign. Pro., 1329-1333. DOI: 10.1109/ICOSP.2008.4697377.
  4. Handel, H. (2009), "Analyzing the influences of camera warm-up effects on image acquisition", IPSJ. T. Comput. Vis. Appl., 1, 12-20. DOI: 10.1007/978-3-540-76390-1_26.
  5. Kruth, J., Zhou, L. and Vanherck, P. (2003), "Thermal error analysis and compensation of an LED-CMOS camera 3D measuring system", 3(3).
  6. Lee, J.J. and Shinozuka, M. (2006), "Real-time displacement measurement of a flexible bridge using digital image processing techniques", Exp. Mech., 46(1), 105-114. DOI: 10.1007/s11340-006-6124-2.
  7. Pan, B. (2018), "Thermal error analysis and compensation for digital image/volume correlation", Opt. Lasers Eng., 101, 1-15. DOI: 10.1016/j.optlaseng.2017.09.015.
  8. Pan, B., Yu, L. and Wu, D. (2013), "High-accuracy 2D digital image correlation measurements with bilateral telecentric lenses: error analysis and experimental verification", Exp. Mech., 53(9), 1719-1733. DOI: 10.1007/s11340-013-9774-x
  9. Pan, B., Shi, W. and Lubineau, G. (2015), "Effect of camera temperature variations on stereo-digital image correlation measurements", Appl. Opt., 54(34), 10089. DOI: 10.1364/AO.54.010089.
  10. Pan, B., Tian, L. and Song, X. (2016), "Real-time, non-contact and targetless measurement of vertical deflection of bridges using off-axis digital image correlation", NDT. E. Int., 79, 73-80. DOI: 10.1016/j.ndteint.2015.12.006.
  11. Pan, B. (2018), "Digital image correlation for surface deformation measurements: historical developments, recent advances and future goals", Meas. Sci. Technol., 29(8), 082001. DOI: 10.1088/1361-6501/aac55b.
  12. Tian, L. and Pan, B. (2016), "Remote bridge deflection measurement using an advanced video deflectometer and actively illuminated LED targets", Sensors, 16(9). DOI: 10.3390/s16091344. DOI: 10.3390/s16091344.
  13. Yoneyama, S. and Ueda, H. (2012), "Bridge deflection measurement using digital image correlation with camera movement correction", Mater. Trans., 2(53), 285-290. DOI: 10.2320/matertrans.I-M2011843.
  14. Ye, X.W., Ni, Y.Q. and Wai, T.T. (2013), "A vision-based system for dynamic displacement measurement of long-span bridges: algorithm and verification", Smart. Struct. Syst., 12(3-4), 363-379. https://doi.org/10.12989/sss.2013.12.3_4.363.
  15. Ye, X.W., Yi, T. H. and Dong, C. Z. (2015), "Multi-point displacement monitoring of bridges using a vision-based approach", Wind Struct., 20(2), 315-326. https://doi.org/10.12989/was.2015.20.2.315.
  16. Ye, X.W., Dong, C.Z. and Liu, T. (2016), "A review of machine vision-based structural health monitoring: methodologies and applications", J. Sens., 2016, 1-10. DOI: 10.1155/2016/7103039.
  17. Ye, X.W., Dong, C.Z. and Liu, T. (2016), "Image-based structural dynamic displacement measurement using different multi-object tracking algorithms", Smart. Struct. Syst., 17(6), 935-956. DOI: 10.12989/sss.2016.17.6.935.
  18. Yu, L. and Lubineau, G. (2019), "Modeling of systematic errors in stereo-digital image correlation due to camera self-heating", Scientific reports, 9(1), 6567. DOI: 10.1038/s41598-019-43019-7.
  19. Yu, Q., Chao, Z. and Jiang, G. (2014), "The effects of temperature variation on videometric measurement and a compensation method", Image Vis. Comput., 32(12), 1021-1029. DOI: 10.1016/j.imavis.2014.08.011.
  20. Zhou, H.F., Zheng, J.F. and Xie, Z.L. (2017), "Temperature effects on vision measurement system in long-term continuous monitoring of displacement", Renew. Energy, 114, 968-983. DOI: 10.1016/j.renene.2017.07.104.

Cited by

  1. Cost-Effective and Ultraportable Smartphone-Based Vision System for Structural Deflection Monitoring vol.2021, 2019, https://doi.org/10.1155/2021/8843857