• 한국분말재료학회지
• /
• 제30권5호
• /
• pp.424-430
• /
• 2023

YAG phosphor powders were fabricated by the atmospheric plasma spraying method with the spray-dried spherical YAG precursor. The YAG precursor slurry for the spray drying process was prepared by the PVA solution chemical processing utilizing a domestic easy-sintered aluminum oxide (Al₂O₃) powder as a seed. The homogenous and viscous slurry resulted in dense granules, not hollow or porous particles. The synthesized phosphor powders demonstrated a stable YAG phase, and excellent fluorescence properties of approximately 115% compared with commercial YAG:Ce³⁺ powder. The microstructure of the phosphor powder had a perfect spherical shape and an average particle size of approx imately 30 ㎛. As a result of the PKG test of the YAG phosphor powder, the synthesized phosphor powders exhibited an outstanding luminous intensity, and a peak wavelength was observed at 531 nm.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.164-169
• /
• 2009

A powder form of aluminum (hydr)oxides is not suitable in wastewater treatment/filtration systems because of low hydraulic conductivity and large sludge production. In this study, aluminum (hydr)oxide-coated sand (AOCS) was used to remove phosphate from aqueous solution. The properties of AOCS were analyzed using a scanning electron microscopy (SEM) combined with an energy dispersive X-ray spectrometer (EDS) and an X-ray diffractometer (XRD). Kinetic batch, equilibrium batch, and closed-loop column experiments were performed to examine the adsorption of phosphate to AOCS. The XRD pattern indicated that the powder form of aluminum (hydr)oxides coated on AOCS was similar to a low crystalline boehmite. Kinetic batch experiments demonstrated that P adsorption to AOCS reached equilibrium after 24 h of reaction time. The kinetic sorption data were described well by the pseudo second-order kinetic sorption model, which determined the amount of P adsorbed at equilibrium ($q_e$ = 0.118 mg/g) and the pseudo second-order velocity constant (k = 0.0036 g/mg/h) at initial P concentration of 25 mg/L. The equilibrium batch data were fitted well to the Freundlich isotherm model, which quantified the distribution coefficient ($K_F$ = 0.083 L/g), and the Freundlich constant (1/n = 0.339). The closed-loop column experiments showed that the phosphate removal percent decreased from 89.1 to 41.9% with increasing initial pH from 4.82 to 9.53. The adsorption capacity determined from the closed-loop experiment was 0.239 mg/g at initial pH 7.0, which is about two times greater than that ($q_e$ = 0.118 mg/g) from the kinetic batch experiment at the same condition.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.196-203
• /
• 2008

The densification behavior of Al-20Si-5.5Fe-1.2Mg-0.5Mn powders was investigated through micro-structure analysis of sintered specimens. The specimens sintered in vacuum or in high purity (99.999%) nitrogen showed porous near-surface microstructures. The densification of near-surface part was enhanced by means of ultra-high purity (99.9999%) nitrogen atmosphere. The relationship between slow densification and oxide surfaces of Al alloy powders was discussed. And the effects of Mg addition, nitrogen gas, and humidity on densification were discussed. In addition, the rapid growth of primary Si crystals above the critical temperature was reported.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.10-15
• /
• 2003

본 연구에서는 세륨연마재 폐슬러리 건조분말로부터 세륨을 포함한 희토류성분과 알루미늄을 분리하고자 하였다. 출발원료인 세륨연마재 폐슬러리 건조분말의 희토류 중에는 산화세륨이 전체 희토류 성분의 약 40% 정도 함유되어 있는데, 산화세륨은 희토류원소들 중에서 가장 안정된 형태로 이에 대한 분해가 용이하지 않다. 그러므로 황산화반응을 이용하여 산화세륨을 분해하므로써 희토류의 분리ㆍ회수율을 향상시키고자 하였으며, 침출용액으로부터 희토류와 알루미늄을 분리하기 위하여, 희토류 원소들은 황산매질에서 황산나트륨과 반응하여 황산나트륨희토류(ReㆍNa($SO_4$)$_2$)를 형성하면서 침전되는 특성을 이용하였으며 쉽게 희토류와 알루미늄을 분리할 수 있었다.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.95-103
• /
• 2006

알루미늄 분말이 약 20% 포함된 2종류의 고체 추진제에 대해 원료성분, 연소실에서의 연소가스 물성치 및 산화알루미늄의 입자 크기를 비교 분석하였다. 산화제(AP/HNIW) 분말이 200과 5 ${\mu}m$로 이분양상이고 47% 부피분율을 지닌 알루미늄을 함유한 PCP계 추진제는 산화제(AP) 분말이 400, 200 및 6 ${\mu}m$로 삼분양상이고 64% 부피분율을 지닌 알루미늄을 함유한 HTPB계 추진제 보다 알루미늄들이 응집될 가능성이 크다는 것을 축소부 내열재에서 채취한 산화알루미늄 입자의 SEM 사진을 통해 확인할 수 있었다. PCP계 추진제를 적용한 고체 추진기관의 노즐 축소부 내열재에서는 큰 산화알루미늄 입자의 충돌로 인해 그레인 슬랏과 일치하는 4개 원주방향 부위에서 삭마가 크게 되었지만 HTPB계 추진제를 적용한 경우에는 원주방향으로 균일하게 삭마되었다.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.337-343
• /
• 2003

Nanostructured Cu-$Al_2O_3$ composite powders were synthesized by thermochemical process. The synthesis procedures are 1) preparation of precursor powder by spray drying of solution made from water-soluble copper and aluminum nitrates, 2) air heat treatments to evaporate volatile components in the precursor powder and synthesis of nano-structured CuO + $Al_2O_3$, and 3) CuO reduction by hydrogen into pure Cu. The suggested procedures stimulated the formation of the gamma-$Al_2O_3$, and different alumina formation behaviors appeared with various heat treating temperatures. The mean particle size of the final Cu/$Al_2O_3$ composite powders produced was 20 nm, and the electrical conductivity and hardness in the hot-extruded bulk were competitive with Cu/$Al_2O_3$ composite by the conventional internal oxidation process.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.216-220
• /
• 2015

Vertically oriented nickel nanowire arrays with a different diameter and length are synthesized in porous anodic aluminium oxide templates by an electrodeposition method. The pore diameters of the templates are adjusted by controlling the anodization conditions and then they are utilized as templates to grow nickel nanowire arrays. The nickel nanowires have the average diameters of approximately 25 and 260 nm and the crystal structure, morphology and microstructure of the nanowires are systematically investigated using XRD, FE-SEM and TEM analysis. The nickel nanowire arrays show a magnetic anisotropy with the easy axis parallel to the nanowires and the coercivity and remanence enhance with decreasing a wire diameter and increasing a wire length.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.99-103
• /
• 2018

Spherical monosized pure aluminum (Al) particles are successfully fabricated by the pulsated orifice ejection method (POEM). The surface reaction between Al and the graphite crucible is investigated by analysing the microstructure and chemical composition of the materials. No significant chemical reaction occurs between Al and the graphite owing to the crystalline Al oxide (${\gamma}-Al_2O_3$) layer generated in the initial state. The ${\gamma}-Al_2O_3$ layer is clearly observed in all regions between the Al particles and graphite via transmission electron microscopy and confirmed by the selected area diffraction pattern. The morphology of the ${\gamma}-Al_2O_3$ layer perfectly follows the surface morphology of the graphite crucible, which showed nanoscale roughness. This implies that molten Al could not directly contact graphite even though the surface of the crucible became rough to some extent. However, this passivation phenomenon allowed the successful fabrication of monosized pure Al particles. Therefore, POEM is a useful process at least to manufacture monosized pure Al particles.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.191-196
• /
• 2010

본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 소결된 세라믹 타겟 대신 분말 타겟으로 사용하여 알루미늄 도핑된 산화아연(Aluminum doped zinc oxde; AZO)박막을 마그네트론 스퍼터법에 의해 제조하고, 스퍼터 압력에 따른 박막 물성을 조사하였다. 유리 기판에 증착된 AZO 박막은 타깃 종류 및 스퍼터 압력에 관계없이 기판에 수직한 c-축 방향으로 우선 성장방위를 갖는 hexagonal 구조로 성장되었다. 스퍼터 압력이 증가함에 따라 이 면 방향으로의 결정성장이 촉진되었다. AZO 박막의 전기적, 광학적 특성은 스퍼터 압력 증가에 따라 향상되었으며, 15 mTorr에서 $6.5{\times}10^{-1}\;{\Omega}-cm$의 최소의 비저항 값을 나타내었다.