• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.784-792
• /
• 2018

In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.28-33
• /
• 1994

The laser-assisted chemical vapor deposition (LCVD) is described, by which the growth of single-phase GaN epitaxy is achieved at lower temperatures. Trimethylgallium (TMG) and ammonia are used as source gases to deposit the epitaxial films of GaN under the irradiation of ArF excimer laser (193 nm). The as-grown deposits are obtained on c-face sapphire surface near 700$^{\circ}$C, which is substantially reduced, relative to the temperatures in conventional thermolytic processes. To overcome the lattice mismatch between c-face sapphire and GaN ad-layer, aluminum nitride(AlN) is predeposited as buffer layer prior to the deposition of GaN. The gas phase interaction is monitored by means of quadrupole mass analyzer (QMA). The stoichiometric deposition is ascertained by X-ray photoelectron spectroscopy (XPS). The GaN deposits thus obtained are characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and van der Pauw method.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.135-140
• /
• 2003

The difference in lattice parameter and thermal expansion coefficient between GaN and Si which results in many defects into the grown GaN is larger than that between GaN and sapphire. In order to obtain high quality GaN films on Si substrate, it is essential to understand growth characteristics of GaN. In this study, GaN layers were grown on Si(111) substrates by MOCVD at three different GaN growth temperatures ($900^{\circ}C$, $1,000^{\circ}C$ and $1,100^{\circ}C$), using AlN and LT-GaN buffer layers. Using TEM, we carried out the comparative investigation of growth characteristics of GaN by characterizing lattice coherency, crystallinity, orientation relationship and defects formed (transition region, stacking fault, dislocation, etc). The localized region with high defect density was formed due to the lattice mismatch between AlN buffer layer and GaN. As the growth temperature of GaN increases, the defect density and surface roughness of GaN are decreased. In the case of GaN grown at $1,100^{\circ}$, growth thickness is decreased, and columns with out-plane misorientation are formed.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.699-704
• /
• 2017

Recently, the use of an aluminum nitride(AlN) buffer layer has been actively studied for fabricating a high quality gallium nitride(GaN) template for high efficiency Light Emitting Diode(LED) production. We confirmed that AlN deposition after $N_2$ plasma treatment of the substrate has a positive influence on GaN epitaxial growth. In this study, $N_2$ plasma treatment was performed on a commercial patterned sapphire substrate by RF magnetron sputtering equipment. GaN was grown by metal organic chemical vapor deposition(MOCVD). The surface treated with $N_2$ plasma was analyzed by x-ray photoelectron spectroscopy(XPS) to determine the binding energy. The XPS results indicated the surface was changed from $Al_2O_3$ to AlN and AlON, and we confirmed that the thickness of the pretreated layer was about 1 nm using high resolution transmission electron microscopy(HR-TEM). The AlN buffer layer deposited on the grown pretreated layer had lower crystallinity than the as-treated PSS. Therefore, the surface $N_2$ plasma treatment on PSS resulted in a reduction in the crystallinity of the AlN buffer layer, which can improve the epitaxial growth quality of the GaN template.

• 한국결정성장학회지
• /
• 제34권2호
• /
• pp.61-65
• /
• 2024

HVPE(Hydride vapor phase epitaxy) 공법은 기체상의 원료를 사용하여 박막 또는 단결정을 제조하는 공법이다. 화학적 기상증착법의 원리를 적용하여 난용융성 또는 고융점의 물질의 단결정을 성장할 수 있는 공법으로서, 질화갈륨(GaN) 단결정을 얻을 수 있는 공법 중 하나이다. 최근 동 공법을 이용하여 질화알루미늄(AlN) 단결정을 성장하고자 하는 연구가 많이 수행되어져 왔으나, 아직은 좋은 결과를 얻지 못하고 있다. 본 연구에서는 AlN 단결정을 HVPE 공법으로 성장하고자 하였다. 성장 공정에서 질소를 운송가스(Carrior gas)로 사용하였으며, 질소(N2)의 양의 변화에 따른 성장 결과를 고찰하여 보았다. 질소의 양이 증가함에 따른 성장 결정의 변화 양상을 확인할 수 있었다. 성장된 AlN 단결정의 형상을 광학 현미경을 사용하여 관찰하였고, 이중결정 X선 회절 분석(DCXRD, Double crystal X-ray diffractometry)을 이용하여, AlN 결정의 생성을 확인함과 동시에 성장된 단결정의 결정성도 알아보았다.

• 대한전자공학회논문지SD
• /
• 제49권5호
• /
• pp.10-15
• /
• 2012

본 논문에서는 고효율 고출력 DUV(Deep Ultra Violet)-LED(Light Emitting Diodes)의 구현을 위하여 n-side에서 p-side로 well 두께를 다르게 형성하는 비대칭 MQW 에피구조를 제안하였다. 제안된 구조의 물리적 해석을 위해 상용화된 3차원 시뮬레이터 SimuLEDTM을 이용하여 소자의 전기적/광학적 특성을 비교 분석 하였다. 시뮬레이션 결과, 본 연구에서 제안한 B구조(n-side에서 p-side 방향으로 well 두께를 2 nm, 3 nm, 4 nm 로 제작)의 에피층을 가지는 UV-LED는 기본 MQW 에피구조를 가지는 UV-LED와 동작전압은 8.9 V로 동일한 값을 가졌지만 광출력은 기본구조의 10.6 mW 에 비해 약 1.17배 향상된 12.4 mW의 값을 가지는 것을 확인하였다.