• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.207-214
• /
• 2000

Sand Compaction Pile method is one of the widely used ground improvement techniques at loose sand or soft clay ground in Asian countries. However, due to environmental and economical problems concerning shortage of sand resources alternative materials are needed to substitute sand for SCP. This study is on the applicability of slag as an alternative material SCP. Consolidation and direct shear test are performed for the slag-clay composite specimens to find out the positive effects of consolidation rate and shear resistance of slag reinforced ground. The result shows that slag has similar effects with sand in consolidation and shear resistance behavior in composite ground, which says slag can be used as alternative material of sand for SCP.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.34-42
• /
• 2011

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fibers, followed by fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the Hobart mixer were effective on increasing tensile and tear strength at fast drainage, but there were no further increase by kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1408-1411
• /
• 2005

The purposes of daily cover are to control odor and volatile organic compound emissions, to control litters, to mitigate rainfall infiltration. Under usual operation of landfill, the soil layer of 15cm thick is used for daily cover, but about $20{\sim}$25% of landfill capacity is consumed by daily cover volume. Considering our limited land and difficulty in getting landfill site, developing an alternative daily cover material which usually occupies much less volume than soil will be very significant. Also, if we can use waste material for alternative daily cover, we can get additional benefit of recycling waste.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.346-352
• /
• 2003

The study was performed to search on alternative material for turbopump parts made of Russian material by analyzing and comparing chemical and mechanical material properties. Iron base material was generally used for turbopump. This material can be categorized into stainless steel and heat resisting steel by quantity of additional elements. Each steel was also classified into austenite steel, ferrite steel, and martensite steel. Alternative materials for turbopump inducer, impeller and casing are chosen by JIS SUS 631 and 321 as a result of this study. Because the material of Russian turbopump turbine may be developed by Russia itself, alternative material can be hardly found. However, Inconel 718 for turbine material is thought to be proper in the aspect of hardness considering general use of this material for turbopump turbine in Japan and France.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.429-435
• /
• 2007

A number of different alternative actuation methods have been under active development for some specific applications where the traditional electromechanical actuators are difficult to apply. Recently, many of these substitutes are trying to employ new smart materials like electroactive polymers. However most of the polymeric materials are flexible and vulnerable so that they normally can not sustain external forces. Although the materials have shown a good potential to be used for alternative actuation mechanisms, no tangible industrial application is yet presented because of the reason. A conceptual design for a rectilinear motion actuator using dielectric elastomer is presented in this article. The introduced design concept might enable to produce fairly controllable rectilinear motions for various applications and the presented prototype actuator system is fully packaged in a small unit and controlled by a standard communication interface.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.338-343
• /
• 2010

As an alternative to the W plug used in MOSFETs, a Cu plug with a NiSi contact using Ta / TaN as a diffusion barrier is currently being considered. Conventionally, Ni was first deposited and then NiSi was formed, followed by the barrier and Cu deposition. In this study, Ti was employed as a barrier material and simultaneous formation of the NiSi contact and Cu plug / Ti barrier was attempted. Cu(100 nm) / Ti / Ni(20 nm) with varying Ti thicknesses were deposited on a Si substrate and annealed at $4000^{\circ}C$ for 30 min. For comparison, Cu/Ti/NiSi thin films were also formed by the conventional method. Optical Microscopy (OM), Scanning Probe Microscopy (SPM), X-Ray Diffractometry (XRD), and Auger Electron Microscopy (AES) analysis were performed to characterize the inter-diffusion properties. For a Ti interlayer thicker than 50 nm, the NiSi formation was incomplete, although Cu diffusion was inhibited by the Ti barrier. For a Ti thickness of 20 nm and less, an almost stoichiometric NiSi contact along with the Cu plug and Ti barrier layers was formed. The results were comparable to that formed by the conventional method and showed that this alternative process has potential as a formation process for the Cu plug/Ti barrier/NiSi contact system.

• Korean Institute of Interior Design Journal
• /
• v.14 no.1
• /
• pp.91-99
• /
• 2005

The chief aim of this study is to prepare the rational alternative plan of the environmental friendly intoner design which can improve sick house syndrome of an apartment house and clarify future-development and the method proposal of use activation and point out the present problem depended to investigate development and the use actual condition of domestic environmental friendly interior materials related in-and-outside-the-country example on a foundation about the various precedence researches on environmental friendly interior materials. The study was witten at first the concept of the environmental interior design which leads environmental friendly charactenstics of material, a interior design, and construction, at the first in the conceptual definition of sick house syndrome. and then it was introduced the present condition of domestic environmental interior materials, interior design and construction and an environmental regulation and standard of in-and-outside-the-country In Conclusion, it may try to present comprehensive analysis and an expansive alternative plan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.460-466
• /
• 1999

The huge amount of demand for feedgrains from this region could not possibly be met by producing countries from the other regions. In order to fulfill this increasing demand for conventional raw materials, an alternative for the conventional raw materials produced in the Asia and Pacific region is becoming increasingly more important. A potential alternative is concentrates or non-conventional concentrates produced locally in relative abundance in this region. These feedstuffs include feed grains, by-products from the milling, sugar industries, brewing and distilling industries. Vegetable, citrus, and animal by-products from abattoir, feather meal and blood meal are also possibilities. In addition to more widespread use of unconventional feed sources, the following approach is recommended to improve utilization and performance. These include establishing the nutritive value of non-conventional feeds, quality control to minimize variability, proper storage and processing to assure the nutritive value and prevent mycotoxin contamination, properly balance amino acids with protein sources, supplementation with synthetic amino acids and the use of enzymes to increase digestibility. Currently, practical applications for these resources in feed formulation are negligible despite the potential. The socio-economic aspects will dominate the use of these non-conventional concentrates. In the future, the feed industry will resolve the problems in using locally available raw feed materials.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1132-1141
• /
• 2006

Recently it is difficult to secure sand used in the improvement of soft ground, and so it is necessary to find alternative materials. For this reason many researchers are studying and trying to find new substitute materials. One of the materials is considered as converter slag by wind fracture which is generated in the production of steel manufacture by electric circuit. It is environment friendly since it is a recycled material and economical since it is cheaper than sand. To investigate the applicability of converter slag by wind fracture as the alternative material such as vertical drains, it is necessary to check the drainage effect of this in the field construction. In order to attain an successful design it is important to predict problems encountered in field construction. Accordingly, in this study the laboratory test was executed under different conditions in advance of applying of the field. A total of 4 cases including slag, sand+slag, pack slag and sand as vertical drains was conducted, and at the base of the laboratory test the field test was executed and analyzed.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.1
• /
• pp.35-43
• /
• 2015

The critical element for sustainable growth in the construction industry is the development of alternative cements. A new technological process called geopolymerization provides an innovative solution, and the presence of aluminum and silicon oxides in fly ash has encouraged its use as a source material. Many previous investigations have involved curing the binder in a heated environment. To reduce energy consumption during the synthesis of geopolymers, the present study investigated the properties of ambient cured geopolymer mortar at early ages. An experimental program was executed to establish a relationship between the activator composition and the properties of geopolymer mortar in fresh and hardened states. Concentrations of sodium hydroxide and sodium silicate were ascertained that are advantageous for constructability and mechanical behavior. Scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction techniques were also used to characterize the material. Test results indicate that there is potential for the concrete industry to use fly ash based geopolymer as an alternative to portland cement.