• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.187-194
• /
• 2014

With environmental regulations continuously being strengthened internationally the need to control environmental pollution and environmental load is emerging in Korea. The purpose of this study is to seek methods or using waste cementitious powder as an alternative raw material for limestone through the optimization of raw material and to quantitatively analyze the resulting reduction of $CO_2$ emission in order to contribute to solving the issue of waste, which is the biggest issue in relation to construction and global warming. The results of the study, show that waste cementitious powder can be used as an alternative raw material for limestone at OPC level, but it was also found that mixing fine aggregate cementitious powder into waste cementitious powder significantly affected the substitution rate for limestone with waste cementitious powder and the reduction of greenhouse gas. In particular, when fine aggregate cementitious powder was used at a rate of 0~20%, the substitution rate for limestone and the reduction in the rate of greenhouse gas emission was significantly reduced. It is thought that a technique to efficiently separate and discharge the fine aggregate cementitious powder mixed in waste cementitious powder needs to be developed in the future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.489-495
• /
• 2000

When microorganisms such as bacteria and fungi are injected into porous medium such as soils along with appropriate substrate and nutrients, biomass retained in the soil pore. Soil pore size and shape are varied from the initial condition as a result of biofilm formation, which make hydraulic conductivity reduced. In this research, hydraulic conductivity reduction was measured after microorganism are inoculated and cultured with synthetic substrates and nutrients. Biomass-soil mixture was evaluated its applicability to the field condition as an alternative liner material in landfill by measuring hydraulic conductivity change after repetitive freeze-thaw cycles.

• 대한산업공학회지
• /
• 제36권1호
• /
• pp.42-51
• /
• 2010

The semiconductor industry is highly capital and technology intensive. Technology advancement on circuit design and process improvement requires chip makers continuously to invest a new fabrication facility that costs more than 3 billion US dollars. Especially major semiconductor companies recently started to discuss 450mm fabrication substituting existing 300mm fabrication of which facilities were initiated to build in 1998. If the plan is consolidated, the yield of 450mm facility would be more than doubled compared to existing 300mm facility. In steps of this important investment, facility layout has been acknowledged as one of the most important factors to be competitive in the market. This research proposes a new concept of semiconductor facility layout using hexagonal floor plan and its compatible material flow pattern. The main objective of this proposal is to improve the productivity of the unified layout that has been popularly used to build existing facilities. In this research, practical characteristics of the semiconductor fabrication are taken into account to develop a new layout alternative based on the analysis of Chung and Tanchoco (2009). The performance of the proposed layout alternative is analyzed using computer simulation and the results show that the new layout alternative outperforms the existing layout alternative, unified layout. However, a few questions on space efficiency to the new alternative were raised in communication with industry practitioners. These questions are left for a future study.

• International Journal of Concrete Structures and Materials
• /
• 제10권1호
• /
• pp.15-28
• /
• 2016

With the aim to reduce the atmospheric $CO_2$, utilization of the carbonated lime produced from the aqueous carbonation reaction for the synthesis of a cementitious material would be a promising approach. The present investigation deals with the aqueous carbonation of slaked lime, followed by hydrothermal synthesis of a cementitious material utilizing the carbonated lime, silica fume, and hydrated alumina. In this study, the aqueous carbonation reaction was performed under four different conditions. The TGA, FESEM, and XRD analysis of the carbonated product obtained from the four different reaction conditions was performed to evaluate the efficacy of the reaction conditions used for the production of the carbonated lime. Additionally, the performance of the cementitious material was verified analyzing the physical characteristics, mechanical property and setting time. Based on the results, it is demonstrated that the material produced by the hydrothermal method possesses the cementing ability. Additionally, it is revealed that the mortar prepared using the alternative cementitious material yields $33.8{\pm}1.3MPa$ compressive strength. Finally, a plausible reaction scheme has been proposed to explain the overall performances of the aqueous carbonation as well as the hydrothermal synthesis of the cementitious material.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.23-29
• /
• 2022

Fly ash is a by-product of coal fired electrical power plants and used as a material for cement and concrete; particularly, imported fly ash is mainly applied for cement production. Main objectives of this article are to replace domestic fly ash with an imported source. To verify the possibility of domestic fly ash as a material for cement from the aspect of chemical composition and physical properties, we manufactured various kinds of cement, such as using only natural raw material, shale, and partial replacement with domestic and imported fly ash. When we used the domestic and imported fly ash, there were no specific problems in terms of clinker synthesis or cement manufacturing in relation to the natural material, shale. In conclusion, domestic fly ash has been confirmed as an alternative raw material for cement because 7 days and 28 days compressive strength values were better than those of reference cement using natural raw material, on top of the process issue.

• 한국문헌정보학회지
• /
• 제51권3호
• /
• pp.215-246
• /
• 2017

시각장애인에게 대체자료는 정보접근 및 이용, 지식정보 격차해소, 사회참여 및 통합에 매우 중요한 요소이다. 그럼에도 불구하고 대체자료는 최근까지도 점자도서관 등의 자발적 노력과 자치단체의 재정지원 하에 개인의 요청이나 담당자의 판단으로 제작되고 있기 때문에 그 범위가 문학자료와 교양 취미도서로 한정되고 중복제작 될 뿐만 아니라 대체포맷 또한 매우 제한적이다. 이에 본 연구에서는 국내외 도서관 및 관련 단체의 대체자료 제작사례를 분석하고 시각장애인도서관과 시각장애인을 대상으로 설문조사 방식을 적용하여 대체자료 제작현황과 인식을 조사 분석하였다. 이를 바탕으로 대체자료 제작 및 이용 활성화를 위한 개선방안을 제시하였다.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.5-11
• /
• 2011

본 논문에서는 자연모래 2종(세사, 왕사)과 부순모래, 자갈 2종(10mm, 20mm)을 대상으로 실내시험을 통하여 입도 분포 특성, 마찰특성 및 토압특성 등 되메움 재료 별 이중보온관의 거동 특성을 평가하고, 합리적인 되메움 대체재료 제시를 위하여 기존 이중보온관 되메움재인 중사와 비교를 수행하였다. 연구결과에 따르면, 부순모래는 5종의 되메움 대체재료 별 평가결과 이중보온관에 미치는 공학적 특성 및 재료의 수급 측면에 있어 기존 중사를 이용하는 이중보온관 되메움재의 대체재료로 가장 합리적인 재료로 평가되었다.

• 대한토목학회논문집
• /
• 제32권1C호
• /
• pp.1-6
• /
• 2012

본 논문에서는 이중보온관의 다짐시공 중 안정성 평가 및 되메움 대체재료 제시를 위하여 현장시험을 수행하였다. 현장시험 시 사용된 되메움 재료는 기존 되메움 재료인 중사와 되메움 대체재료 평가를 위한 자연모래 2종(세사, 왕사)과 부순모래, 자갈 2종(10mm, 20mm)을 사용하였다. 현장시험은 되메움재료 별 이중보온관 토압 및 변형, 외관손상 등의 거동 특성 평가를 위하여 수행하였다. 연구결과에 따르면, 부순모래는 5종의 되메움 대체재료 별 평가결과 이중보온관에 미치는 공학적 특성 및 재료의 수급 측면에 있어 기존 중사를 이용하는 이중보온관 되메움재의 대체재료로 가장 합리적인 재료로 평가되었다.

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.177-184
• /
• 2018

This study contributes to evaluate multiphase topology optimization design of plate-like structures on elastic foundations by using classic plate theory. Multi-material optimal topology and shape are produced as an alternative to provide reasonable material assignments based on stress distributions. Multi-material topology optimization problem is solved through an alternative active-phase algorithm with Gauss-Seidel version as an optimization model of optimality criteria. Stiffness and adjoint sensitivity formulations linked to thin plate potential strain energy are derived in terms of multiphase design variables and Winkler-Pasternak parameters considering elastic foundation to apply to the current topology optimization. Numerical examples verify efficiency and diversity of the present topology optimization method of elastic thin plates depending on multiple materials and Winkler-Pasternak parameters with the same amount of volume fraction and total structural volume.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1408-1411
• /
• 2005

The purposes of daily cover are to control odor and volatile organic compound emissions, to control litters, to mitigate rainfall infiltration. Under usual operation of landfill, the soil layer of 15cm thick is used for daily cover, but about $20{\sim}$25% of landfill capacity is consumed by daily cover volume. Considering our limited land and difficulty in getting landfill site, developing an alternative daily cover material which usually occupies much less volume than soil will be very significant. Also, if we can use waste material for alternative daily cover, we can get additional benefit of recycling waste.