DOI QR코드

DOI QR Code

A Study on Alternative Backfill Material for Pre-insulated Pipe through the Laboratory Tests

실내시험을 통한 이중보온관 되메움 대체재료에 관한 연구

  • Choi, Bong-Hyuck (Dept. of Civil Engrg., Hanyang Univ.) ;
  • Kim, Jin-Man (Geotechnical Engrg. & Tunnelling Research Division, Korea Institute of Construction Technology) ;
  • Yoo, Han-Kyu (Dept. of Civil and Environmental Engrg., Hanyang Univ.)
  • 최봉혁 (한양대학교 대학원) ;
  • 김진만 (한국건설기술연구원 지반연구실) ;
  • 유한규 (한양대학교 건설환경공학과)
  • Received : 2010.08.24
  • Accepted : 2011.09.16
  • Published : 2011.09.30

Abstract

This paper recommends the alternative back-fill material for the pre-insulated pipe based on the results of tests performed using different kinds of backfill material. In this study, laboratory tests were preformed to determine the behavior of the pre-insulated pipe caused by variation on grain size distribution, friction characteristics and earth pressure characteristics of different types of backfill material. Two types of natural sand (fine-grained and coarse-grained sand) and crushed sand, and two types of gravel (10mm, 20mm) were used as backfill material in the laboratory tests. The laboratory test results were analyzed and compared with the pre-insulated pipe backfilled with the standard medium-grained sand. Based on the evaluation and comparison of laboratory test results, it was determined that crushed sand is the most suitable back-fill material that can be used as an alternative for medium grained sand for pre-insulated pipes.

본 논문에서는 자연모래 2종(세사, 왕사)과 부순모래, 자갈 2종(10mm, 20mm)을 대상으로 실내시험을 통하여 입도 분포 특성, 마찰특성 및 토압특성 등 되메움 재료 별 이중보온관의 거동 특성을 평가하고, 합리적인 되메움 대체재료 제시를 위하여 기존 이중보온관 되메움재인 중사와 비교를 수행하였다. 연구결과에 따르면, 부순모래는 5종의 되메움 대체재료 별 평가결과 이중보온관에 미치는 공학적 특성 및 재료의 수급 측면에 있어 기존 중사를 이용하는 이중보온관 되메움재의 대체재료로 가장 합리적인 재료로 평가되었다.

Keywords

References

  1. 한국건설기술연구원 (2002), 지중매설구조물의 하중저감 특성에 관한 연구, 건기연 2002-026, 서울, pp.123-126.
  2. 건설교통부 (2007), 산업.환경설비공사 표준시방서, 대한설비공사, 서울, p.532.
  3. 최봉혁, 김진만, 김경민, 강민수 (2008), 이중보온열배관의 공학적 특성 및 안정성 평가에 관한 연구, 2008 대한토목학회 정기학술대회 논문집, 대한토목학회, pp.3068-3071.
  4. 한국지역난방공사 (2006), 열배관건설업무지침서, 한국지역난방공사, 서울, p.249.
  5. A. P. Moser (2001), Buried Pipe Design, McGraw-Hill, New York 등, pp.1-24.
  6. ASTM, ASTM D5321 (Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method).
  7. Taylor R. K. (1973), Induced Trench Method of Culvert Installation, Highway Research Record, No.443, Highway Research Board, Washington D.C., pp.15-29.
  8. Yuichi et al. (1996), "Earth Pressure Reduction for Culverts Using EPS", Proc. Internatioal Symposium on EPS Construction Method (EPS TOKYO '96), TOKYO, pp.214-221.

Cited by

  1. 현장시험을 통한 이중보온관 되메움 대체재료에 관한 연구 vol.32, pp.c1, 2011, https://doi.org/10.12652/ksce.2012.32.1c.001