• 제목/요약/키워드: Alternative Liner Material

검색결과 14건 처리시간 0.027초

플라이애쉬의 차수 및 오염물 차단 능력 평가 연구 (Evaluation of Fly Ash as an Alternative to Clay Liner Material in Landfills)

  • 정문경;현재혁;김승현
    • 한국지반공학회지:지반
    • /
    • 제14권5호
    • /
    • pp.191-204
    • /
    • 1998
  • 플라이 애쉬의 폐기물 매립장 대용 차수재로서의 적용성을 평가하기 위하여 실내 실험과 모델 연구를 실시하였다. 실제의 매립장 차수층이 불포화 상태일 수 있는 점을 고려하여, 대용 차수재와 기존의 점토 차수재에서의 포화 및 불포화 상태에서의 물 흐름 특성을 비교하였다. 차수층에서의 오염물 이동 특성을 연구하기 위하여 오염물을 이용한 회분실험을 실시하였으며, 이때 폐놀을 대표 오염물질로 사용하였다. 모델은 물질 수지에 기초하였으며, 유한 차분법과 predictor-corrector법을 이용한 수치 해법으로 풀었고, 연립 미분방정식을 다루는테는 sequential method를 이용했다. 연구 결과 대용 차수재는 기존 차수재보다 폐놀 차단 능력이 더 크고 또 불포화대에서의 차수능력도 더 크다는 것을 알 수 있었다. 또한, 본 연구에서 고려된 흐름조건에서는 차수층을 포화대로 해석할 경우 통과하는 물의 양이 약간 과소평가되고 폐놀 차단 능력은 매우 과소평가됨을 알 수 있었다.

  • PDF

열소성변형공정을 시행한 회주철제 실린더 라이너의 재료물성에 관한 연구 (A Study on the Material Properties of Grey Cast Iron for Cylinder Liner Treated by Thermo Plastic Deformation Process)

  • 김태형;김종호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권6호
    • /
    • pp.671-677
    • /
    • 2005
  • In internal combustion engines the usual material for the cylinder liner is because of its good wear resistance Apparently this wear resistance arises from the at iron to form a hard glazed surface when under sliding friction. When the cylinder liner wear limits, it shall be replace with new one according to the classification soci manufacturer's standards. However, adoption of alternative repairing method such a metalizing, thermo plastic deformation process became inevitable taking enormous cost renewal into consideration. In this paper. the material properties of cylinder liner of grey discussed on the basis of the results of experimental work of the thermo plastic deformation the worn out cylinder liner made of grey cast iron.

Bacteria/Fungi 혼합토를 이용한 현장 Bio-barrier 형성 (In Situ Bio-barrier Formation using Bacteria/Fungi-Soil Mixture)

  • 김건하;송영우;구동영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.489-495
    • /
    • 2000
  • When microorganisms such as bacteria and fungi are injected into porous medium such as soils along with appropriate substrate and nutrients, biomass retained in the soil pore. Soil pore size and shape are varied from the initial condition as a result of biofilm formation, which make hydraulic conductivity reduced. In this research, hydraulic conductivity reduction was measured after microorganism are inoculated and cultured with synthetic substrates and nutrients. Biomass-soil mixture was evaluated its applicability to the field condition as an alternative liner material in landfill by measuring hydraulic conductivity change after repetitive freeze-thaw cycles.

  • PDF

SRSL(Self Recovering Sustainable Liner)재의 매립지 최종복토층에서균열 손상 시 치유 능력 검토 (Evaluating the recovering capacity of cracked SRSL in the landfill final cover)

  • 백현욱;하민기;권오정;박준범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.1412-1419
    • /
    • 2005
  • Preventing the infiltration of rainwater into the landfill site is the main purpose of the final cover in landfill sites. Compacted clay layer or geomembrain have been used as a conventional landfill final cover. But they have several disadvantages when damages might occur due to puncturing, differential settlement and desiccation or freeze and thaw. For this reason, as an alternative method SRSL(Self Recovering Sustainable Liner) has been developed. Adopting the precipitation reaction of two chemical material, by forming precipitates that fill the pores, and lower the overall permeability of the liner. The advantage of this method is that when fracture of the liner occurs the remaining reactants of the two layers form precipitates that fill the fracture and recover the low permeability of the liner. In this study, the recovering ability of the SRSL with a crack due to the seasonal variation or differential settlements was investigated by permeability tests. And in order to estimate the durability of the SRSL after freeze/thaw and desiccation, uniaxial compression strength tests were performed.

  • PDF

미생물 토양 주입을 통한 Bio-barrier 형성 (Bio-barrier Formation by Biomass Injection into Soil)

  • 김건하;송영우;구동영
    • 대한환경공학회지
    • /
    • 제22권5호
    • /
    • pp.927-938
    • /
    • 2000
  • 박테리아를 토양과 같은 다공성 매질에 주입시키고 적절한 기질과 영양분을 공급시키면 박테리아는 매질의 표면에 부착하여 성장한다. 그 결과 바이오필름이 생성되어 공극의 크기가 감소하여 매질의 투수계수가 감소되며, 오염물질을 분해시키는 생물학적 오염분해 능력을 갖게 된다. 본 연구는 투수계수가 비교적 큰 모래와 화강풍화토에 박테리아를 접종, 배양한 후 토양의 투수계수의 변화를 측정하였으며, 배양된 바이오필름의 화학물질에 대한 저항성 및 온도변화에 대한 내구성 실험을 통해 대용 차수재로의 가능성을 평가하였다. 또한 bio-barrier의 유기물질 분해능 및 bio-barrier의 두께에 따른 미생물의 생장도를 column test를 통하여 측정하여 bio-barrier 내에서의 기질의 이동 및 생분해와 박테리아 농도의 분포 변화간의 관계를 제시하였다.

  • PDF

SRSL(Self Recovering Sustainable Liner)재의 매립지 최종복토층에 대한 활용성 검토 (Applicability of SRSL(Self-Recovering Sustainable Liner) to the Landfill Final Cover System)

  • 권오정;서민우;홍수정;박준범;박수영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.453-460
    • /
    • 2004
  • To prevent penetration of rainwater into the landfill site is the main purpose of the final cover in landfill sites. Conventional designs of landfill covers uses geotextiles such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature in landfill sites cause the development of cracks or structural damage inside the final cover and it is also difficult to obtain clay - the main material of the compacted clay liner in Korea. Thus the former final cover system that suggests geomembrane and GCL or compacted clay liner has several limitations. Therefore, an alternative method is necessary and one of them is the application of SRSL(self-Recovering Sustainable Liner) material. SRSL is two different layers consist of individual materials that react with each other and form precipitates, and with this process lowers the permeability of the landfill final cover. SRSL generally is made up of two layers, so that when a internal crack occurs the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing; (1) jar test to verify the formation of precipitate in the mixture of each reactants, (2) falling head test considering the field stress in order to confirm the decrease of permeability or prove that the hydraulic condctivity is lower than the regulations, (3) compression tests to judge weather if the strength satisfies the restricts for landfills, (4) freeze/thaw test to check the applicability of SRSL for domestic climate. In addition, the application of waste materials in the environmental and economical aspect was inspected, and finally the possibility of secondary contamination due to the waste materials was examined by performing elution tests.

  • PDF

SRSL 매립지 최종 복토층의 투수 및 강도 특성 (Hydraulic Conductivity and Strength Characteristics of Self Recovering Sustainable Liner (SRSL) as a Landfill Final Cover)

  • 권오정;이주형;조완제;정영훈
    • 한국지반공학회논문집
    • /
    • 제27권12호
    • /
    • pp.5-15
    • /
    • 2011
  • 본 연구는 매립지의 최종복토층으로 사용되는 점토 혹은 지오멤브레인의 부등침하 및 기상조건변화에 의한 균열에 취약한 점을 고려하여 균열 발생시 자가형성된 물질로 인하여 균열치유 작용을 할 수 있는 SRSL(Self Recovering Sustainable Liner)의 매립지 최종복토층으로서의 적용성을 파악하였다. SRSL 기법은 2개의 층을 두어 상, 하부층 사이 계면에 불투수성 물질을 생성하는 동시에, 균열발생 시에도 2가지 성분이 다시 결합하여 불투수성 물질을 재형성하는 역할을 수행한다. SRSL의 최종복토층의로서의 적용성 파악을 위해서 실험실에서 연성벽체 투수시험기를 사용하여 투수 특성을 파악하였고 일축압축시험을 통하여 강도 및 강성 특성을 파악하였다. 또한 최종 복토층의 경우 환경적인 요인에 직접적으로 노출되어 있기 때문에 동결/융해 및 건조/습윤에 따른 SRSL의 투수 및 강도 특성 또한 알아보았다. 시험 결과, SRSL은 낮은 투수계수와 기준보다 높은 강도를 가진 매립장의 복토층 재료로 적합한 물질로 판단되며, 동결/융해 및 건조/습윤의 환경적인 영향에 대해서도 안정한 것으로 판명되었다.

폐기물 매립장의 차수재 및 복토재로서 하수 슬러지 재활용 (Reuse of Water Treatment Sludge as Liner and Cover Materials in Waste Landfills)

  • 이용수;정하익
    • 한국지반공학회지:지반
    • /
    • 제13권4호
    • /
    • pp.5-12
    • /
    • 1997
  • 현재, 하수 슬러지가 매립장에 주로 단순 매립되고 있는데, 이를 폐기물 매립장의 차수재 또는 복토재로 활용한다면 산업부산물의 재활용이라는 측면에서 큰 잇점이 있을 것이다. 이를 위하여 본 논문에서 하수 슬러지에 대한 다짐, 강도, 투수, 화학반응성 및 용출시험 등을 실시하여 매립장의 복토재 또는 차수재로서의 활용성을 검토하였다. 실험결과, 하수슬러지 혼합재는 벤토나이 트의 첨가량이 증가함에 따라 최대건조밀도는 증가하고 최적함수비는 감소하는 것으로 나타났다. 하수슬러지 혼합재의 강도는 벤토나이트의 첨가량이나 경과시간에 따라 증감효과가 크게 나타나지 않았다. 벤토나이트의 첨가량이 증가함에 따라 그리고 시간이 경과함에 따라 투수계수는 감소하였으며 투수계수가 1x10-7cm/sec가 되기 위한 벤토나이트의 첨가량은 약 40%정도로 나타났으며. 이는 차수재로서 하수슬러지를 활용한다면 벤토나이트 첨가량을 40%이상을 요구하며, 반면 복토재로 활용한다면 벤토나이트 첨가량이 20%이내임을 알 수있다. 하수슬러지 혼합재의 침출수와 반응성에 의한 투수특성 변화는 미약한 것으로 나타났다.

  • PDF

인공 고관절 골두용 세라믹 복합재료에 대한 세라믹-세라믹 접촉 마멸 특성 분석 (Ceramic-Ceramic Wear of Zirconia/Alumina Composites for the Application of Total Hip Replacement)

  • 이권용;김환;김대준;이명현;서원선
    • Tribology and Lubricants
    • /
    • 제21권5호
    • /
    • pp.216-220
    • /
    • 2005
  • The sliding wear behaviors of three different compositions of novel low temperature degradation-free zirconia/alumina (LTD-free Z/A) composites were examined in a ceramic-ceramic contact pair. The wear tests were performed by using a pin-on-disk type wear tester in a linear reciprocal sliding motion with a line contact in both dry and bovine serum lubricated conditions at room temperature. From the results of dry sliding wear tests, Z/A#1((5.3Y, 4.6Nb)-TZP/80 $vol\%Al_2O_3$) showed the best wear resistance among three kinds of LTD-free Z/A composites. For the bovine serum lubricated sliding wear tests, wear was too little to be measured for all kinds of Z/A composites. These novel LTD-free Z/A composites having excellent wear resistance demonstrated a potential as the alternative materials for the ceramic-ceramic contact pairs of femoral head and acetabular liner in total hip replacement.

나노실리카 및 실리카흄 대체율에 따른 차수재의 특성 (Characteristics of Mine Liner According to the Replacement Ratio of Nano-Silica and Silica-Fume)

  • 강석표;이희라;강혜주;남성영;김춘식
    • 한국건설순환자원학회논문집
    • /
    • 제7권1호
    • /
    • pp.66-73
    • /
    • 2019
  • 광산의 약 80%가 휴광 또는 폐광된 광산으로 대부분 적절한 환경처리시설 없이 방치되어 있다. 폐광산 주변 지역은 산성광산 배수와 침출수 유출 등의 문제가 발생되고 있으며, 이로 인한 지반 침하는 싱크홀 발생으로 안전사고를 유발시킬 수 있다. 본 연구에서는 기존 고로슬래그 미분말 기반 광산 차수재의 나노 실리카 및 실리카흄 대체율 변화에 따른 차수재의 기초 특성을 검토하기 위해 플로우, 압축강도, 흡수율, 기공특성, 수화특성을 실시하였다. 그 결과 나노실리카 및 실리카흄의 대체율이 증가할수록 나노실리카의 시험체는 실리카흄의 시험체보다 플로우, 압축강도가 증가하고 흡수율은 감소하였다. 기공특성의 경우 나노실리카 및 실리카흄 대체율이 증가할수록 기공량이 감소하는 것으로 나타났으며 특히 직경 10~1,000nm의 모세관 기공량이 감소하는 것으로 나타났다. 선 회절분석 및 SEM 측정은 Plain과 실리카흄 5% 대체 시험체와 비교할 경우 수화생성물의 피크 위치가 거의 동일하게 나타났다. 나노실리카 및 실리카흄의 사용은 광산 차수재의 수밀성 향상이 가능할 것으로 판단되며 경제성을 고려하여 적절히 사용한다면 광산 차수재의 재료로서 활용 가능할 것으로 판단된다.