• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.451-456
• /
• 2004

To establish a Altari radish pre-processing system far kimchi, the leaves and root tail of the Altari radish cutting de-vices were developed. The cutting resistances depend on the edge angles, oblique angles and cutting speeds were measured and analyzed. The experiments were performed to reveal the optimal conditions that showed the minimum cutting resistances acting on the materials. As the results, the optimum conditions that acting on the leaves were at edge angle $25^{\circ}$, oblique angle $40^{\circ}$ and cutting speed 0.5 m/s, and those acting on the root tails were at edge angle $20^{\circ}$, oblique angle $30^{\circ}$ and cutting speed 0.5 m/s, respectively. Considered a safety conception, the oblique angle of the leaves cutting device was adjusted as $20^{\circ}$, and then the cutting efficiencies of the both devices at these conditions were showed perfect performances.

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.121-127
• /
• 2006

An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.166-171
• /
• 2005

A prototype peeling device with rotating cutter blades was designed to peel altari radish skin. With the designed blades, the maximum peeling depth increased as the cutter clearance increased but the effect of the peeling speed was not significant. The optimal operating conditions for peeling was; the peeling speed was at 0.19m/s when peeled 2.5 blades/sec and the maximum peeling depth was 1.5mm, the minimum peeling depth was 0.5mm, and the leaf rotating speed was 12 rpm, respectively. In the peeling test fur the optimum operation conditions, with a auxiliary rolling device could adjust the rotational speed of the root uniformly, the altari radishes under 70mm diameter were peeled perfectly.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.29-36
• /
• 2004

The geometric characteristics of the Altari radish were measured for the purpose of mechanization of the kimchi processing. In this study, geometric characteristics such as the sectional area and volume of the radishes(pyeong-gang and sa-chul) were calculated using the image processing method, and physical properties such as the compressive strength, the cutting force of the radish and the torsional moment of the radish leaf-stems were measured by using a universal testing machine. In case of the radish(pyeong-gang), the weight was ranged 215.0∼465.0 g, the length of the radishes(body) was 86.3∼129.2 mm, the diameters were 43.3∼58.1 mm, and the length of the leaves was 261.3-368.2 mm. And the vertical compressive strengths were ranged 83.8∼171.7 N/$\textrm{cm}^2$, the horizontal compressive strengths were 113.0∼176.3 N/$\textrm{cm}^2$, the shearing forces were 86.0∼114.6 N, and the surface hardness was ranged 51.1∼52.1 N/$\textrm{cm}^2$. In case of the radish(sa-chul), the weight was ranged 203.5∼412.2 g, the length of the bodies was 67.5∼127.0 mm, the diameters were 22.3∼59.8 mm and the length of the leaves was 245.6∼312.6 mm respectively. And the vertical compressive strengths were ranged 91.3∼168.3 N/mm, the horizontal compressive strengths were 132.6∼186.9 N/$\textrm{cm}^2$, the shearing forces were 89.4∼116.5 N, and the surface hardness was ranged 52.4∼67.8 N/$\textrm{cm}^2$, respectively.