• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.830-835
• /
• 2012

A research for application of LDSMC(Low Density Sheet Molding Compound) composite is in progress for lightening the weight. This paper has performed fatigue test and simulation of external panel for Korean commercial vehicle. Before the fatigue test, static test was carried out. From the test, the structural safety was investigated using Goodman diagram. After the static test performance, the fatigue test was conducted at a range of load frequency 5Hz, a stress ratio(R) of 0.05 and an endurance limit of $10^6$ to obtain the S-N curve. The S-N curve is applied to the fatigue analysis of the external panel assembly. The result of FEM analysis was in accord with the experimental result within 83% confidence. It showed that the process to set up the safety range of allowable error is required in process of the design and simulation verification.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.115-122
• /
• 1994

Roberige had proposed a method of linear approximation using strips. This method is known to be fast relatively, and the distance between the given curve and calculated straight line is not greater than an allowable error. But this method generates many break points. Later, Leng and Yang proposed the dynamic strip algorithm with the rotation of strips which reduced the number of greak points at the sacrifice of the speed. The method using the seperate rotation of two strip lines proposed in this paper is faster than Leng and Yang's but generates almost the same number of break points as Leng and Yang's.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.875-878
• /
• 2006

In the case of a vibration sensitive equipment, it require a vibration free environment to provide its proper function, therefore, it is very important to predict precisely vibration environment of microelectronics production facility due to adjacent blast work. However, it is not easy to evaluate a quantitative vibration response of structure due blast because it can be determined by the characteristics of vibration sources, propagation through rock and soil and dynamic properties of building. In this paper, vibration influence evaluation of micro-electronic Production building induced from adjacent blast activity was performed by real measurement data obtained on ground and structure at same time. And blast vibration allowable limit on ground was supposed by measurement data analysis in order to avoid operation error of precision equipments

• 전자공학회논문지B
• /
• 제31B권6호
• /
• pp.91-103
• /
• 1994

As CAD systems are introduced in the filed of engineering design, the necessities for automatic drawing input are increased . In this paper, we propose a method for realizing automatic drawing input by separation of text regions and graphic regions, extraction of line vectors from graphic regions, and recognition of circular arcs and circles from line vectors. Sizes of isolated regions, on a drawing are used for separating text regions and graphic regions. Thinning and maximum allowable error method are used to extract line vectors. And geometric structures of line vectors are analyzed to recognize circular arcs and circles. By processing text regions and graphic regions separately, 30~40% of vector information can be reduced. Recognition of circular arcs and circles can increase the utilization of automatic drawing input function.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.281-282
• /
• 2006

This paper proposed a method of the camera calibration for noncontact measure of badly illumination. The method with a semi-automation camera calibration, The user designates minimum 4 points in calibration pattern. The Perspective transformation predicts the remaining point calibration pattern. It uses at input value of the Tsai and it searches a better point, When being smaller allowable error than until, it repeats and it puts out a good calibration result.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.113-122
• /
• 2011

This paper introduces and develops an efficient method for measuring power factor (PF) and its nature under nonlinear load current situations. The method is based on generating a pulse width modulated signal whose width correlates to the value of PF. This signal can then be employed as a feedback signal for controlling PF related power quantities in a system. This method has the advantages of its simple implementation, less computational complexity, and its allowable error of less than 4[%], which is justified by the computer simulation results.

• International Journal of Advanced Culture Technology
• /
• 제7권4호
• /
• pp.268-273
• /
• 2019

The apparent soil resistivity is used for estimating multilayer soil parameters, such as, layer's depth and soil resistivity. The soil parameters are estimated by continuously revising those parameters until the error between the measured and calculated apparent soil resistivity reaches to allowable level. The equation for calculating the apparent soil resistivity is complicated and time consumed, because it is composed of an infinite integral which includes a zero order Bessel's function of the first kind. In this paper, a fast algorithm for calculating the apparent soil resistivity of horizontal multilayer earth structure is proposed using exponential sampling method.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.762-769
• /
• 2016

The dynamic modulation transfer function (MTF) for image degradation caused by sinusoidal vibration is formulated based on a Bessel function of the first kind. The presented method makes it possible to obtain an analytical MTF expression derived for arbitrary frequency sinusoidal vibration. The error obtained by the use of finite order sum approximations instead of infinite sums is investigated in detail. Dynamic MTF exhibits a stronger random behavior for low frequency vibration than high frequency vibration. The calculated MTFs agree well with the measured MTFs with the slant edge method in imaging experiments. With the proposed formula, allowable amplitudes of any frequency vibration are easily calculated. This is practical for the analysis and design of the line-of-sight stabilization system in the remote sensing camera.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.120-129
• /
• 2003

For successful establishment of the roughing CAM system based on reverse engineering, it is necessary to develop the measurement method for generation of roughing path from a physical footwear model. In this study, the development of the roughing path measurement system is presented. It consists of 3 CCD cameras, image acquisition board and the roughing path measurement algorithm. The 3 CCD cameras capture images of the sidewall and the bottom of the footwear and, from two images, the outer and inner lines are extracted using image-processing algorithm. The roughing path measurement algorithm generates the roughing path which is reflected on the change of resolution according to the distance between the CCD camera and the measured point. The experimental results show that the developed system can measure the roughing path within the allowable roughing error range.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.142-148
• /
• 2014

The mirror which is considered in designing a MFD is off-axis primary one and its dimension is wide 556mm height 345mm. The MFD(Mirror Fixation Device) load specification is generated for the high resolution mirror. The optical WFEs for unit loads are calculated from mirror sensitivity analysis and they are compared with allocated allowable optical WFE. The parasite load for the MFD is calculated from their comparison. The MFD compliant with the parasite load is designed.