• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1925-1928
• /
• 2012

Adsorption of alkali metals (Li, Na, and K) on the surface of magnesium oxide nanotubes (MgONTs) with different diameters was investigated using density functional theory. According to the obtained results, the most stable adsorption site was found to be atop the oxygen atom of the tube surface with adsorption energies in the range of -0.25 to -0.74 eV. HOMO-LUMO gap ($E_g$) of the tubes dramatically decreases upon the adsorption of the alkali metals, resulting in enhancement of their electrical conductivity enhancement. The order of $E_g$ decrement caused by the metal adsorption is as follows: K > Na > Li. The results suggest that the MgONTs were transformed from semi-insulator to semiconductor upon the alkali metal adsorption. Increasing the tube diameter, the HOMO/LUMO gap of the pristine tube is enhanced and adsorption energies of the alkali metals are decreased.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.93-97
• /
• 1991

Rate constants have been measured spectrophotometrically for the reactions of alkali metal ethoxides with 4-nitrophenyl benzoate, S-4-nitrophenyl thiobenzoate and 4-nitrophenyl thionbenzoate in ethanol at 25$^{\circ}$C. Substitution of S for O in the leaving group has not affected reactivity significantly, while the effect of the similar replacement in the acyl group has led to rate decrease by a factor of 10, although pronounced rate enhancements have been expected for both systems. The replacement of O by a polarizable S has also influenced the reactivity of the esters toward alkali metal ethoxides, i.e. the reactivity decreases as the size of the metal ion decreases. The alkali metal ions have showed inhibition effect instead of catalytic effect which would have been expected for the present system. The effect of replaced sulfur atom on the reactivity for the present system is attributed to the nature of hard and soft acids and bases.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1951-1956
• /
• 2011

A kinetic study is reported on nucleophilic substitution reactions of 4-nitrophenyl nicotinate 5 and isonicotinate 6 with alkali metal ethoxide EtOM (M = K, Na, and Li) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. Plots of pseudo-first-order rate constant $k_{obsd}$ vs. EtOM concentration exhibit upward curvature for the reactions of 5 and 6 with EtOK and EtONa but are almost linear for those with EtOLi. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has shown that $k_{EtOK}$ ${\geq}$ $k_{EtONa}$ > $k_{EtO^-}$ but $k_{EtOLi}$ < $k_{EtO^-}$. It has been concluded that $K^+$ and $Na^+$ ions catalyze the reactions by increasing the electrophilicity of the carbonyl carbon atom through formation of a 4-membered cyclic transition state $TS_3$ or $TS_4$. However, $M^+$ ion catalysis has been found to be much less significant for the reactions of 5 and 6 than for the corresponding reactions of 4-nitrophenyl picolinate 4, which was reported to proceed through a 5-membered cyclic transition state $TS_2$. Although 5 and 6 are significantly more reactive than 4-nitrophenyl benzoate 3, the reactions of 5 and 6 result in smaller $k_{EtOK}/k_{EtO^-}$ ratios than those of 3. The electron-withdrawing ability of the nitrogen atom in the acyl moiety of 5 and 6 has been suggested to be responsible for the increase in reactivity and the decrease in the $k_{EtOK}/k_{EtO^-}$ ratio.

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.557-564
• /
• 1996

FAB CAD MS/MS(Fast Atom Bombardment Collision Activated Dissociation Mass Spectrometry/Mass Spectrometry) was used to study different degree of bond stability according to the linkage positions of alkali cationized $(Na^+, Li^+, K^+, NH_4^+)$ stereoisomeric and synthetic oligosaccharides. The alkali metal cations were much more stable, requiring over -40 eV of collision energy vs. only -10 eV for the protonated forms. Of the cations, the potassium cationized trisaccharides were more stable than the others. They would not yield fragment ions under the conditions of collision available in triple quadrupole. Other cationized species exhibited decreasing stability in the series $Nap^+>Li^+>NH_4^+$ using 0.8 mTorr argon pressure in the collision cell. Metal cations of the oligosaccharides maintained charge principally on the amino sugar as shown by shift of all the fragment ions containing the amino sugar. The reason for the higher stability of the metal cationized form is the formation of crown ether-like bond around metal cations, N-acetyl group on GlcNAc and oxygens on fucose moiety. Depending on the metal sizes and the conformation of linkage-isomeric region, cationized species gave linkage dependent fragment patterns and exhibited stability in the series 1-6 > 1-4 > 1-3 linkage.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2483-2487
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) were measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl picolinate (6) with alkali metal ethoxides (EtOM, $M^+\;=\;K^+$, $Na^+$ and $Li^+$) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] exhibits upward curvature regardless of the nature of $M^+$ ions. However, the plot for the reaction of 6 with EtOK is linear with significantly decreased $k_{obsd}$ values when 18-crown-6-ether (18C6, a complexing agent for $K^+$ ion) is added in the reaction medium. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that ion-paired EtOM is 3~17 times more reactive than dissociated $EtO^-$. The reaction has been proposed to proceed through a 5-membered cyclic transition state, in which $M^+$ ion increases the electrophilicity of the reaction site. Interestingly, $Na^+$ ion exhibits the largest catalytic effect. The presence of a nitrogen atom in the pyridine moiety of 6 has been suggested to be responsible for the high $Na^+$ ion selectivity.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2423-2427
• /
• 2011

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 3,4-dinitrophenyl diphenylphosphinothioate 9 with alkali metal ethoxides (EtOM, M = Li, Na, K) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] is linear for the reaction of 9 with EtOK. However, the plot curves downwardly for those with EtOLi and EtONa while it curves upwardly for the one with EtOK in the presence of 18-crown-6-ether (18C6). Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that the reactivity increases in the order $k_{EtOLi}$ < $k_{EtONa}$ < $k_{EtO^-}$ ${\approx}$ $k_{EtOK}$ < $k_{EtOK/18C6}$, indicating that the reaction is inhibited by $Li^+$ and $Na^+$ ions but is catalyzed by 18C6-crowned $K^+$ ion. The reactivity order found for the reactions of 9 contrasts to that reported previously for the corresponding reactions of 1, i.e., $k_{EtOLi}$ > $k_{EtONa}$ > $E_{EtOK}$ > $k_{EtO^-}$ ${\approx}$ $k_{EtOK/18C6}$, indicating that the effect of changing the electrophilic center from P=O to P=S on the role of $M^+$ ions is significant. A four-membered cyclic transition-state has been proposed to account for the $M^+$ ion effects found in this study, e.g., the polarizable sulfur atom of the P=S bond in 9 interacts strongly with the soft 18C6-crowned $K^+$ ion while it interacts weakly with the hard $Li^+$ and $Na^+$ ions.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1789-1793
• /
• 2014

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for the reactions of 5-nitro-8-quinolyl nicotinate (4) and 5-nitro-8-quinolyl isonicotinate (5) with alkali metal ethoxides (EtOM; M = K, Na and Li) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [EtOM] curve slightly upward for the reactions with EtOK and EtONa but are linear for the reactions with EtOLi and for those with EtOK in the presence of 18-crown-6-ether. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constants for the reactions with the dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that the reactivity increases in the order $EtO^-{\approx}EtOLi$ < EtOK < EtONa for the reactions of 4 and EtOLi < $EtO^-$ < EtOK < EtONa for the reactions of 5. Comparison of the kinetic results for the reactions of 4 and 5 with those reported previously for the corresponding reactions of 5-nitro-8-quinolyl benzoate (2) and picolinate (3) has revealed that the esters possessing a pyridine ring (i.e., 3-5) are significantly more reactive than the benzoate ester 2 due to the presence of the electronegative N atom (e.g., 2 << 3 < 4 < 5). It has been concluded that $M^+$ ion catalyzes the reactions of 3-5 by increasing the electrophilicity of the reaction center through a five-membered cyclic transition state (TS) for the reaction of 3 and via a four-membered cyclic TS for the reactions of 4 and 5.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.276-280
• /
• 1987

Several chiral potassium B-alkyl-9-boratabicyclo[3.3.1]nonanes $(K\; B-R^*-9-BBNH)$ and potassium B-alkoxy-9-boratabicyclo[3.3.1]nonanes $(K \;B-OR^*-9-BBNH)$ were synthesized by treatment of the corresponding trialkylboranes and dialkylmonoalkoxyboranes with a small excess of potassium hydride. The chiral B-alkoxy derivatives generally reduce representative ketones, such as acetophenone and 3-methyl-2-butanone, with greater optical induction than the corresponding B-alkyl derivatives, suggesting the involvement of the oxygen atom in the control process for asymmetric synthesis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.207-207
• /
• 2011

Amorphous transparent oxide semiconductors (a-TOS) have been widely studied for many optoelectronic devices such as AM-OLED (active-matrix organic light emitting diodes). Recently, Nomura et al. demonstrated high performance amorphous IGZO (In-Ga-Zn-O) TFTs.1 Despite the amorphous structure, due to the conduction band minimum (CBM) that made of spherically extended s-orbitals of the constituent metals, an a-IGZO TFT shows high mobility.2,3 But IGZO films contain high cost rare metals. Therefore, we need to investigate the alternatives. Because Aluminum has a high bond enthalpy with oxygen atom and Alumina has a high lattice energy, we try to replace Gallium with Aluminum that is high reserve low cost material. In this study, we focused on the electrical properties of IZO:Al thin films as a channel layer of TFTs. IZO:Al were deposited on unheated non-alkali glass substrates (5 cm ${\times}$ 5 cm) by magnetron co-sputtering system with two cathodes equipped with IZO target and Al target, respectively. The sintered ceramic IZO disc (3 inch ${\phi}$, 5 mm t) and metal Al target (3 inch ${\phi}$, 5 mm t) are used for deposition. The O2 gas was used as the reactive gas to control carrier concentration and mobility. Deposition was carried out under various sputtering conditions to investigate the effect of sputtering process on the characteristics of IZO:Al thin films. Correlation between sputtering factors and electronic properties of the film will be discussed in detail.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.64-72
• /
• 2017

A series of Pt-based ${\gamma}-Al_2O_3$ catalysts promoted with several alkali and alkaline earth metals were prepared by a wet impregnation method. We confirmed that the addition of Na to $Pt/{\gamma}-Al_2O_3$ could cause a change in the oxidation state of Pt through an electronegative gap between Pt and Na atom, and increase the ratio of the metallic Pt. The metallic Pt species made by adding an optimum Na content improved the adsorption of NO species on the catalyst surface and restrained the oxidation of $CH_4$ to $CO_2$. When molar ratio of Na/Pt was 4.0, the highest catalytic activity could be obtained.