• Journal of the Korean Chemical Society
• /
• 제49권6호
• /
• pp.560-566
• /
• 2005

Sintered ceramic samples of pure and some copper doped layered sodium lithium tri-titanate ($Na_{1.9}Li_{0.1}Ti_{3-X}Cu_XO_{7-X}$) materials with different dopant molar percentages (0.0$Cu^{2+}$ at $Ti^{4+}$ sites in the lattice is proposed in this paper. Furthermore, three distinct regions have been identified in log(${\sigma}_{d.c.}T$) versus 1000/T plots. The lowest temperature region is attributed to electronic hopping conduction(polaron) for all copper doped derivatives and ionic conduction for lithium substituted $Na_2Ti_3O_7$.The mechanism of conduction in the intermediate region is associated interlayer ionic conduction and in the highest temperature region is associated modified interlayer ionic conduction.

• Journal of Adhesion and Interface
• /
• 제12권4호
• /
• pp.111-116
• /
• 2011

The characteristics of natural resin, sap of the lacquer tree were examined as an adhesive for the ceramic conservation since it has such outstanding properties like corrosion resistance against acid and alkali, heat-resistance, waterproof, antiseptic and protection against insects. In order to utilize raw lacquer as an adhesive not under the hardening conditions of lacquer like high humidity (RH 75 to 85%) and high temperature (120 to $170^{\circ}C$), but under normal condition, isinglass and animal glue were added to raw lacquer at certain ratio. In addition, the viscosity and the drying time were measured and their possibilities of application were also investigated through measurement of tensile and adhesive strength. As a result of experiment, it was possible to dry at room temperature and RH $50{\pm}5%$ to mix with raw lacquer and glue, and the drying time of sample with animal glue was faster than that of isinglass. Furthermore, the adhesion of sample with glue was increased more than raw lacquer. It seems to be possible to use the environmental friendly traditional adhesive for the ceramic conservation and restoration, if there are studies or examinations of safety of applications on objects and weathering resistance.

• The Journal of the Petrological Society of Korea
• /
• 제24권2호
• /
• pp.141-147
• /
• 2015

Using laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), we evaluated the reliability of trace element abundance data measured from the silicate rock references of JR-3, JG-3, JGb-1 and JB-1b using glass discs made by alkali fusion. For 28 elements including rare earth elements, relative standard deviations (RSD) are better than 7% in case when the concentrations of the elements in the rock samples are greater than 10 ppm. However, RSD shows somewhat increased values for the concentrations less than 10 ppm, but never exceeds 25%. Compared with previously reported averages of the compiled abundance data, our data display satisfactory results for the most cases with differences less than 10%. We suggest that LA-ICP-MS analysis using fused glass beads is a reliable, precise and time-saving method of trace element analysis for the silicate rocks spanning from mafic to felsic compositions.

• Journal of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.60-66
• /
• 1977

In the addition condensation reaction of m-phenylenediamine(MPD) and resorcinol (RES) with formaldehyde, the suspension polymerization in liquid paraffin was performed and the bead polymers were obtained with good results. The polymers were treated with dilute aqueous sodium hydroxide solutions in order to improve the adsorption capacity to the metallic ions and the adsorptivity to the several metallic ions, such as $Cd^{2+},\;Pb^{2+},\;Al^{3+},\;Mg^{2+},\;Co^{2+},\;and\;Hg^{2+}$ of the alkali-treated and untreated polymers were tested. These MPD-RES-F type resins showed better adsorption capacity to the heavy metallic ions such as $Cd^{2+}\;and\;Hg^{2+}$ than the light metallic ions such as $Pb^{2+},\;Al^{3+}\;and\;Mg^{2+}$, and the treatment of the resins with about 20 percent aqueous sodium hydroxide solution showed significant improvement of the adsorption capacity to the metallic ions in all cases.

• Journal of the Korean Vacuum Society
• /
• 제19권2호
• /
• pp.114-120
• /
• 2010

Conventional surface texturing in crystalline silicon solar cell have been use wet texturing by Alkali or Acid solution. But conventional wet texturing has the serious issue of wafer breakage by large consumption of wafer in wet solution and can not obtain the reflectance below 10% in multi crystalline silicon. Therefore it is focusing on RIE texturing, one method of dry etching. We developed large scale plasma RIE (Reactive Ion Etching) equipment which can accommodate 144 wafers (125 mm) in tray in order to provide surface texturing on the silicon wafer surface. Reflectance was controllable from 3% to 20% in crystalline silicon depending on the texture shape and height. We have achieved excellent reflectance below 4% on the weighted average (300~1,100 nm) in multi crystalline silicon using plasma texturing with gas mixture ratio such as $SF_6$, $Cl_2$, and $O_2$. The texture shape and height on the silicon wafer surface have an effect on gas chemistry, etching time, RF frequency, and so on. Excellent conversion efficiency of 16.1% is obtained in multi crystalline silicon by RIE process. In order to know the influence of RF frequency with 2 MHz and 13.56 MHz, texturing shape and conversion efficiency are compared and discussed mutually using RIE technology.

• Korean Journal of Food Science and Technology
• /
• 제19권5호
• /
• pp.430-434
• /
• 1987

Fatty acid fraction rich in ${\omega}-3$ polyunsaturated fatty acids (${\omega}-3$, PUFA), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) could be obtained by saponification of fish oil in ethanol containing alkali hydroxide followed by cooling and filtration of the resultant solution. Fatty acid compositions of fish oil and the concentrates suggest that the ratio of number of double bonds to carbon number in a fatty acid molecule is a more important factor than the degree of unsaturation or the chain length in determining the solubility of fatty acid salts in ethanol. Water content in ethano1 affected significantly the efficiency of the separation with respect to yield and content of EPA and DHA in the concentrates; the lower the water content, the higher the efficiency. It was, however, influenced little by cooling procedure and temperature which the saponified solution experienced during the crystallization. Under an optimal condition, the contents of EPA and DHA in the concentrate increased by 2.4 and 2.5 times, respectively, as compared with those in sardine oil.

• Journal of the Mineralogical Society of Korea
• /
• 제17권4호
• /
• pp.365-383
• /
• 2004

Granitic rocks in the southeastern Gyeongsang Basin can be classified into three groups. The group I contains various mafic microgranular enclave (MME) and/or mafic clot which implies magma mixing or mingling. The group II show the feature of shallow depth emplacement at low pressure, and the group III is characterized by A-type granite implying extensional tectonic environment. Mineralogical characteristics of the granitic rocks have showed systematic variations in perthite exsolution temperatures and biotite compositions according to their rock facies, although they do not show any distinctively different trend in geography and textures or rock facies. Amphiboles from Group I are calcic-amphibole and they were formed at 0.4 ～ 2.8 kb in pressure based on the amphibole geobarometry. Amphiboles from group ill are riebeckite, whileas amphiboles were not observed in Group II. The chemical composition of biotite defined in clusters showing a continuous spectrum between group I to ferric-annite of group ill. The composition of plagioclase generally plotted in albite, oligoclase, and andesine area without any distinctive differences among their geography or rock facies. The exsolution temperatures by perthite geothermometry are calculated as $300～400^{\circ}C$ in Group I, and 500～$600^{\circ}C$ in equigranular granite of group II and alkali-feldspar granite of group III.

• Journal of the Mineralogical Society of Korea
• /
• 제22권4호
• /
• pp.279-288
• /
• 2009

Mineral compositions of the Gyeonggi Bay surface sediments were determined using the high resolution X-ray diffractometer and Siroquant v. 3.0 program. Surface sediments are composed of rock forming minerals (quartz 63.8%, plagioclase 12.9%, alkali feldspar 11.7%, muscovite 4.3%, amphibole 1.2%, biotite 0.5% on average), clay minerals (illite 2.4%, chlorite 1.4%, kaolinite 0.4%) and carbonate minerals (calcite 0.1%, aragonite 0.3%). Coarse sediments are high in the northern, southern and central parts of the study area, whereas fine sediments are high in the northern and southern parts of the central area. Coarse sediments have relatively a high quartz content in the northern part, and relatively high plagioclase and muscovite contents in the southern part of the study area. In the southern part and the northern part of central area, fine sediments have relatively a high illite content, and chlorite and kaolinite contents, respectively.

• Korean Journal of Materials Research
• /
• 제11권6호
• /
• pp.465-471
• /
• 2001

The effect of sintering condition on the mechanical properties and leachability of polydispersed ceramic core body made by gel-casting process in aqueous medium have been investigated. The polydispersed ceramic slip that has low viscosity($\leq$1000cP, at 1000cP (at $50sec^{-1}$ ) and high solid loading(50vo1%) was obtained. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$for 48hrs under relative humidity of 80%. Crack-free green body was successfully fabricated through the above process. The strength at room temperature, apparent bulk density, and shrinkage of the ceramic core body increased propotionally with increasing sintering temperature(1100~150$0^{\circ}C$). However, porosity of the ceramic core body showed relatively low vague. Leaching rate of sintered core body increased with increasing porosity of the sintered body, and was significantly dependent upon the concentration of alkali caustic solution at the same leaching temperature.

• The Korean Journal of Ecology
• /
• 제27권6호
• /
• pp.355-361
• /
• 2004

In order to elucidate the ecophysiological characteristics of coastal plants, we collected them on salt marsh and sand dune, and analyzed inorganic ($Na^+,\;K^+,\;Mg^{2+},\;Ca^{2+}$) and organic solutes (soluble carbohydrate, glycine betaine). Chenopodiaceous plant species (Atriplex gmelini, Salicornia europaea, Salsola collina, Suaeda glauca, Suaeda japonica) showed a tendency to accumulate inorganic ions such as $Na^+\;and\;Cl^-$ instead of $K^+$. However, Chenopodium serotinum which lives in ruderal habitat contained more $K^+$ and less $Na^+$ than the other Chenopodiaceous plants. Most Chenopodiaceous plant species maintained very low level of soluble $Ca^{2+}$ and relatively low concentration of carbohydrates and showed high concentration of glycine betaine which is among the most effective known compatible solutes in the leaves of plant under drought and saline conditions. On the other hand, plant species which belong to Gramineae (Ishaemum anthephoroides, Phragmites communis, Zoysia sinica) and Cyperaceae (Carex kobomugi, Carex pumila) absorbed $K^+$ selectively and excluded $Na^+\;and\;Cl^-$ effectively regardless of habitat conditions, and they accumulated more soluble carbohydrate as osmoticum than Chenopodiaceous plants. These results suggested that physiological characteristics such as high storage capacity for inorganic ions (especially alkali cations, chloride) and the accumulation of glycine betaine in chenopodiaceous plants and $K^+$-preponderance, an efficient regulation of ionic uptake (exclusion of $Na^+\;and\;Cl^-$) and the accumulation of soluble carbohydrate in monocotyledonous plants enable them to grow dry and saline habitats.