• 한국표면공학회지
• /
• 제42권3호
• /
• pp.122-127
• /
• 2009

Ga/Al doped ZnO (GAZO) thin films were prepared on non-alkali glass substrate by co-sputtering system using two DC cathodes equipped with AZO ($Al_2O_3$:2.0 wt%) target and GZO ($Ga_2O_3$:6.65 wt%) target. This study examined the influence of Al/Ga concentration and substrate temperature on the electrical, structural and optical properties of GAZO films. The lowest resistivity $1.95{\times}10^{-3}{\Omega}cm$ was obtained at room temperature. With increasing substrate temperature, resistivity of GAZO film decreased to a minimum value of $7.47{\times}10^{-4}{\Omega}cm$ at below $300^{\circ}C$. Furthermore, when 0.05% $H_2$ gas was introduced, resistivity of GAZO film decreased to $6.69{\times}10^{-4}{\Omega}cm$. All the films had a preferred orientation along the (002) direction, indicating that the deposited films have hexagonal wurtzite structure formed by the textured growth along the c-axis. The average transmittance of the films was more than 85% in the visible light range.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.145-146
• /
• 2012

Al이 2wt% 첨가된 AZO(Al-doped ZnO) 타겟을 기판을 가열한 대향 타겟 마그네트론 스퍼터링법을 이용하여 수소 유량에 따라 유리기판 위에 AZO 박막을 증착하였다. 수소 유량에 따른 AZO 박막내의 carrier concentration와 mobility의 변화를 확인하였으며 박막내 crystallinity와 grain size의 변화를 확인하였다. 증착된 AZO 박막 특성의 구조적, 전기적, 광학적 변화조사하고 비저항 및 광투과도 등을 분석하여 투명전극용으로 적합한지 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1349-1350
• /
• 2007

Epitaxial thin films of aluminum-doped zinc oxide (AZO) have been deposited on commercial corning glass using an Nd:YAG pulsed laser deposition technology. The structural, electrical and optical properties of these films were investigated as a function of oxygen pressure. The experimental results show that the electrical resistivity of films deposited at 5 mTorr with substrate temperature of $300^{\circ}C$ were $4.633{\times}10^{-4}$. The average transmission of AZO thin films in the visible range were over 90%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1706-1707
• /
• 2007

A possibility of work function engineering on ZnO thin film is studied by in-situ and ex-situ doping process. The work function of ZnO thin film decreases with increasing boron and phosphorus doping quantity. But, the work function of Al-doped ZnO (AZO) thin film increases as the boron doping quantity incresess. The range of work function change on ZnO thin films is 3.5 eV to 5.5 eV. This result shows that the work function of ZnO thin film is indeed engineerable by changing materials of dopants and their compositional distribution of surface. We also discuss the possible mechanism of work function engineering on ZnO thin films.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.377-383
• /
• 2009

라디오파 마그네트론 스퍼터링 방법을 사용하여 사파이어 기판 위에 Al 도핑된 ZnO (AZO) 박막을 성장시킨 후에 온도 범위 $600-900^{\circ}C$에서 급속 열처리를 수행하였다. 박막의 결정 구조와 표면 형상은 각각 X-선 회절법과 주사전자현미경으로 조사하였다. 급속 열처리 온도가 증가함에 따라 박막의 결정성은 향상되었고, 평균 50 nm의 크기를 갖는 육각형 형태의 결정 입자가 관측되었다. 증착된 모든 박막은 파장 영역 400-1100 nm에서 92%의 평균 투과율을 나타내었다. 열처리 온도가 증가함에 따라 박막의 밴드갭 에너지는 감소하였고, 광여기 발광 신호의 경우에 자외선 발광 신호의 세기가 감소하면서 400 nm에 중심을 둔 보라색 발광 신호가 주된 피크를 형성하였다. 박막의 전기적 특성은 열처리 온도에 현저한 의존성을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.213-213
• /
• 2010

We investigated the RF sputtering conditions for the deposition of AZO (Al doped ZnO) transparent conducting film on PET using the roll to roll vacuum coater. AZO thin films, sputtered at the various RF powers and working pressures, were studied for their structural, electrical and optical properties.. From the X-Ray diffraction patterns, we calculated the lattice stress using the Bragg equation. The compressive stress tends to decrease with the increase in film thickness. AZO thin film with the thickness of 152nm (1400W, 0.4Pa) exhibit the resistivity of $3.92*10-3{\Omega}/cm$ and the transmittance of 96.9% at 550nm.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.43-46
• /
• 2011

In this study, we investigated the effects of the post Ar plasma treatment at different RF powers for various durations on electrical, structural, and optical properties of relatively thin Al-doped zinc oxide films. The sheet resistance was observed to decrease rapidly for the first 5min, beyond which the resistance apparently saturated. As the RF power increased, the grain size and the interplanar distance of (002) planes also increased. The observed decrease in sheet resistance was stated to be a consequence of Al and/or Zn interstitials as well as grain growth. It was also found that Ar plasma treatment increased the transmittance of Al-doped zinc oxide films in most of the visible light range below the blue light.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.338.2-338.2
• /
• 2016

Al doped ZnO (AZO) thin films were deposited on Si substrates with rod-shaped-surface by pulsed laser deposition method (PLD). Si-rods were prepared through chemical etching. To analyze the influence on the formation of the rod structure, samples with various chemical etching conditions such as AgNO3/HF ratio, etching time, and solution temperature were prepared. The morphology of Si-rod structures were examined by FE-SEM. Fig. 1 shows a typical structure of n-AZO/p-Si-rod juncions. The fabricated n-AZO/p-Si-rod devices exhibited p-n diode current-voltage characteristics. We compared the I-V characteristics of n-AZO/p-Si-rod devices with the samples without Si-rod structure.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.36-40
• /
• 2016

The 2 wt.% Al-doped ZnO(AZO) thin films were fabricated on PET substrates with various RF power 20, 35, 50, 65, and 80W by using RF magnetron sputtering in order to investigate the structure, electrical and optical properties of AZO thin films in this study. The XRD measurements showed that AZO films exhibit c-axis orientation. At a RF power of 80W, the AZO films showed the highest (002) diffraction peak with a FWHM of 0.42. At a RF power of 65W, the lowest electrical resistivity was about $1.64{\times}[10]$ ^(-4) ${\Omega}-cm$ and the average transmittance of all films including substrates was over 80% in visible range. Good transparence and conducting properties were obtained due to RF power control. The obtained results indicate that it is acceptable for applications as transparent conductive electrodes.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.27-31
• /
• 2017

AZO/Ag/AZO multi-layer films deposited on glass substrate by RF magnetron sputtering and thermal evaporator have a much better electrical properties than Al-doped ZnO thin films. The multi-layer structure consisted of three layers, AZO/Ag/AZO, the electrical and optical properties of AZO/Ag/AZO were changed mainly by thickness of Ag layers. The optimum thickness of Ag layers was determined to be $90{\AA}$ for high optical transmittance and good electrical conductivity. The Ag layers thickness $90{\AA}$ is an optical transmittance greater than 80% of visible light and the obtained multilayer thin film with the low resistivity of $8.05{\times}10-3{\Omega}cm$ and the low sheet resistance $5.331{\Omega}/sq$. Applying to TCO and Solar electrode will improve efficiency.