• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.91-101
• /
• 2015

'Chuhwangbae' pears (Pyrus pyrifolia Nakai) were investigated on how types of paper bag and harvesting dates influenced on skin blackening before harvest as well as fruit quality after harvest. Experiments included four different types of paper bags (NP/YP, GP/YP, NP/BP, and NP/RP) and five different harvesting dates [160, 170, 180, 190, and 200 days after full bloom (DAFB)]. NP/YP and GP/YP indicated for newspaper- and gray paper-outer bag, respectively, with yellow paper-inner bag of the both. NP/BP and NP/RP indicated for newspaper-outer bag of the both with black paper- and red paper-inner bag, respectively. The NP/YP (newspaper/yellow paper) showed high absorbance and air and water vapor permeability in the bags, while the NP/RP (newspaper/red paper) resulted in poor physical properties in the bags. Fruit enclosed with NP/YP resulted in the absence of skin blackening, but fruit with NP/RP bags had the highest skin blackening (12.7%). Occurrence of skin blackening was concentrated on the middle and calyx end-part of fruit region. NP/RP bag treatment was likely to increase fruit weight, firmness, titratable acidity, and fruit surface color. Harvest at high relative humidity in air increased skin blackening of fruit. Later fruit harvest, such as 190 and 200 DAFB, increased skin blackening, fruit weight, and sugar content while decreasing fruit firmness and titratable acidity.

• 전기의세계
• /
• v.58 no.3
• /
• pp.31-36
• /
• 2009

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.41-41
• /
• 1999

• The Safety technology
• /
• no.103
• /
• pp.14-19
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1994.10a
• /
• pp.95-96
• /
• 1994

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.11a
• /
• pp.32-35
• /
• 2004

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.5
• /
• pp.523-531
• /
• 2015

Air quality was monitored in four roadway tunnels located near Seoul metropolitan area from 7:00AM to 9:00AM. PM10 concentrations range $111{\sim}268{\mu}g/m^3$, which are 2~5 times higher than annual standard $50{\mu}g/m^3$, and PM2.5 concentrations range $35{\sim}65{\mu}g/m^3$, which are 1.5~2.5 times higher than annual standard $25{\mu}g/m^3$. Benzene concentrations range 300~500 ppb, which are 200~300 times higher than 1.5 ppb which is air quality standard. Four-month long term air quality monitoring and test results in one of long tunnels show that PM10 range $30{\sim}400{\mu}g/m^3$ and over 97% of them can be removed by bag filter, effectively. Finally, benzene concentrations range 250~350 ppb.

• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.156-165
• /
• 2006

Already, vari-stem, gas-bag, power deck, air ball etc. are used by various blasting methods to take the advantage of air decking technology in abroad. Air tube product has been used continuously in domestic and air ball product was made recently. In the case study, we analyzed about the application and the effect or air deck blasting method in domestic blasting area. As results or this case study, it was shown that blasting vibration was decreased about $21{\sim}41%$ and quantities or explosives was decreased about $17{\sim}30%$. Also, in the case of using air deck blasting method, fragmentation was shown to be smaller than common blasting method.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2046-2052
• /
• 2008

For the lighting of vehicles structural casting components of aluminum casting alloys are substituted for those of steel or iron. For the manufacturing of large-scale premium quality aluminum castings the developments of a new casting process and a heat treatment process are necessary. The optimum casting design and heat treatment condition for large-scale castings are drawn with the help of Z-Cast software for the casting process analysis in this study. Low pressure sand casting method is applied successfully to produce air bag support components of D357 aluminum casting alloy.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.421-426
• /
• 2009

This paper describes on energy loss in a pipe of refuse collecting system. Analysis energy loss in a pipe is the decisive factor in a design for refuse collecting system. From the analysis energy loss, we can determine the capacity of turbo blower. The flow characteristics in the pipe with the refuse bag are analyzed by three-dimensional Navier-Stokes analysis. The refuse bag is modeled using the actual measurement. We obtain friction factor by changing refuse bag's size and mixing ratio and Reynolds number. And From the result we calculate energy loss by using compressible flow analysis.