• Advances in environmental research
• /
• 제6권2호
• /
• pp.83-94
• /
• 2017

Air quality planning and management requires accurate and consistent records of the air quality parameters. Limited number of monitoring stations and inconsistent measurements of the air quality parameters is a very serious problem in many parts of India. It becomes difficult for the authorities to plan proactive measures with such a limited data. Estimation models can be developed using soft computing techniques considering the physics behind pollution dispersion as they can work very well with limited data. They are more realistic and can present the complete picture about the air quality. In the present case study spatio-temporal models using Linear Genetic Programming (LGP) have been developed for estimation of air quality parameters. The air quality data from four monitoring stations of an Indian city has been used and LGP models have been developed to estimate pollutant concentration of the fifth station. Three types of models are developed. In the first type, models are developed considering only the pollutant concentrations at the neighboring stations without considering the effect of distance between the stations as well the significance of the prevailing wind direction. Second type of models are distance based models based on the hypothesis that there will be atmospheric interactions between the two stations under consideration and the effect increases with decrease in the distance between the two. In third type the effect of the prevailing wind direction is also considered in choosing the input stations in wind and distance based models. Models are evaluated using Band Error and it was observed that majority of the errors are in +/-1 band.

• 대한방사선치료학회지
• /
• 제6권1호
• /
• pp.89-93
• /
• 1994

Authors have measured virtual source distance of electron beam from CL/1800 medical linear accelerator, with newly designed method. Beam scanning was performed with the direction of beam axis in the air. Compared results between this study and well established in phantom measurement shows good agreement with in experimental error. And we have found that build-up cap plays very important role in air measurement because of charge build up. The method of in-air measurement of virtual source distance is very easy to set-up and generate accurate results.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.223-232
• /
• 2004

The change of pressure drop according to the change in the inlet concentration, pulse interval, and injection distance of pulse air jet type bag filters, and the effect of venturi installation are as follows. The pressure drop with the range of 30 to $50mmH_2O$ varies according to the injection distance with 30, 50, 70, 90sec and the inlet concentration of venture built-in fabric filters. For the lower concentration of 0.5g/㎥ and 1g/㎥, the pressure $drop(\DeltaP)$ was stable 60 to 90minutes after operation. For the higher concentration of 3g/㎥, as $\DeltaP$ continues to go up, pulse interval should be set shorter than 30 seconds. The pressure drop with the injection distance of 1l0mm, when inlet dust concentration is 0.5g/㎥ or 1g/㎥, is 1.3 to 2 lower than with the injection distance of 50, 160, and 220mm, which means that the inflow amount of the secondary air by the instant acceleration is large. The injection distance of 2g/㎥ and 3g/㎥ has the similar pressure distribution. The higher inlet concentration is, the more important pulse interval is than injection distance. The pressure drop has proved to be larger when inlet concentration is lower and injection distance closer, on condition that the venturi is installed. The change in the pressure drop was smallest when injection distance was 50mm, followed by 220mm, 160mm, and 110mm.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1528-1538
• /
• 2016

영상정보용 데이터링크는 장거리의 공중-지상 환경에서 영상과 신호정보를 전송하도록 설계된 통신 시스템이다. 본 논문은 장거리 공중-지상 채널환경의 신호 분석에 적합한 곡면지구 2-Ray 모델을 사용하여 영상정보용 데이터 링크의 통신거리에 따른 수신전력 변화 폭을 분석하고 지면 반사파에 의한 수신전력의 변화폭을 경감할 수 있는 수신 안테나의 최적 고각 제어방법을 제안한다. 제안된 방법은 추가적인 하드웨어 성능 향상 없이도 기존의 고각 제어 방법에 비하여 추가적인 링크마진을 확보할 수 있다.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.1021-1030
• /
• 2016

The runner system of the injection mould and the injection volume of the injection molding process greatly affect the quality of the produced part. The goal of this paper is the design of the runner system and the prediction of the injection volume for the injection moulding of a housing part of small-size air cleaner to improve the formability through the three-dimensional injection moulding analysis. The effects of the runner system of the mould on the injection moulding characteristics are investigated. From the results of the investigation, a proper design of the runner system with uniform filling characteristics and the minimized defect formation is obtained. In addition, the influence of the moving distance of the screw on filling characteristics, weldline formation and deformation characteristics is examined. From the results of the examination, an appropriate moving distance of the screw for the housing part of small-size air cleaner is estimated.

• 대한기계학회논문집B
• /
• 제39권8호
• /
• pp.703-711
• /
• 2015

작업의 효율을 높이기 위해서 대형 공장에서 개구부는 주로 개방 되어 있다. 그러나 동절기에 공장에서 난방을 하는 경우 개방되어 있는 개구부는 난방부하를 상승시키는 큰 요인이다. 때문에 공장에서는 개구부 상단에 에어커튼을 설치하여 외부의 침기를 막아 난방부하를 낮춘다. 일반적인 에어커튼의 설계 변수로는 토출 각도와, 속도, 온도 등이 존재하며 이에 대한 연구는 이미 많이 진행되었다. 하지만, 공장이라는 공간적 특수성을 고려하였을 때, 기존에 연구되지 않은 개구부로부터의 이격 거리와 토출구 폭에 대한 부분도 차단 성능에 영향을 미친다. 그 결과 에어커튼은 이격 거리가 가깝고, 토출구 폭은 넓을수록 차단 성능이 좋았다. 이격 거리가 존재하더라도 토출구 폭을 증가시키면 차단 성능이 향상되었으며, 토출구 폭을 증가시킴으로써 약 13.7%의 차단 성능의 향상을 기대할 수 있다.

• 한국수산과학회지
• /
• 제5권2호
• /
• pp.50-56
• /
• 1972

기포막을 이용한 어구 어법을 고안할 목적으로 각종 기포막으로 해산어의 반응을 관찰한 결과는 다음과 같다. 1. 기포막으로 어군의 진로 차단 및 구집이 가능했다. 2. 송기 압력 $0.160kg/cm^2$일 때, 기포 발생용 파이프 내압이 $0.087kg/cm^2$ 이상일 때는 기포막이 순조롭게 형성되었고, 송기 압력 $0.087kg/cm^2$일 때, 그 내압이 $0.018kg/cm^2$ 이하이면 침수되었다. 3. 효율적인 기포막을 형성하기 위해서는 수심 80cm, 송기 압력 $0.160kg/cm^2$에서는 구멍 크기 $\phi$ 0.3mm 간격 30cm가 가장 효과적이었다(Table 2).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.282-285
• /
• 2008

In this paper, the numerical analysis of the model without air-guide was carried out in wind power generator. From numerical results, the temperature rise was not satisfied for the class F insulation and the non-uniformity of temperature distribution was a wide difference in heating elements. To improve these problems, the air-guide was installed in front of the coil head of non-drive end(NDE). The short distance between coil head and air-guide was more effective than long distance in cooling performance. Compared to that of the preliminary design, it was found that the cooling performance of the modification design was improved about 12%.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.19-26
• /
• 2001

The wear characteristic of Zircaloy-4 tube, which is used for a cladding of light water reactor fuel rod, is investigated experimentally. The experiment is conducted with contacting the crossed tube specimens in air as well as in water at room temperature with various combination of contact normal force and sliding distance of reciprocating motion. The contour and the volume of each wear are examined to study the effect of contact condition and environment on wear. As a result, it is found that the wear volume in the water environment is larger than that in the air for all the contact (i.e., force and sliding distance) conditions. However, the wear depth is greater in air than in water if the contact normal force and the sliding distance are larger. These are explained by the ease of detachment of wear particles from the contact surface. On the other hand, workrate model is applied with the contact shear force range measured by our wear tester. Investigated is the correlation between the workrate and the wear volume increase rate of the present experiment. The parabolic curve is found to fit well for the present wear data.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.72-78
• /
• 2016

In terms of power components which use environmentally-friendly dry air that can substitute SF6, there have been studies on the electrical properties of the solid insulation "spacer" for the purpose of securing dielectric strength as they become smaller. This study laminated solid insulation to keep the creeping distance the same in the dry air and investigated vertical surface discharge characteristics by shape. The three sheets of disk-type solid insulation(Bakelite) were laminated in a manner to keep the creeping distance the same. The lamination was categorized as follows: "Type A" in which the insulations with the same disk diameter were laminated; "Type B" in which the insulations whose middle disk diameter was large were laminated; and "Type C" in which the ones whose middle disk diameter was small were laminated. For a vertical surface discharge experiment, dry air was injected into the test chamber depending on the shape of the laminated solid insulation, and chamber pressure was adjusted in a range of 0.1-0.6MPa. As volume decreased, surface discharging voltage by unit volume increased. This was because of dielectric polarization according to the structural characteristics of the shape of lamination. The highest surface discharging voltage was found in "Type C."