• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.51-54
• /
• 2011

Telematics services include automatic location tracking for emergency rescue, which is available for use in case of a car accident due to falling off roadways. This paper presents a simulation study on how far a car will fall before it hits the ground, if dropped off the roadway due to an accident or a natural disaster. The greatest distance the falling car can travel is presented in this paper, on the assumption that air resistance as well as the direction and size of the acceleration due to gravity is negligible.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.1-18
• /
• 2018

Philippines as one of the developing countries in Asia which is compose of more than 7000 islands. Air, Water and Land transportation are the means of travel in the country, however, transportation of goods and services between islands takes place through RoRo ships. There are about 154 RoRo routes connecting the islands in the Philippines and since its establishment, the incomes of the municipalities near the ports have increased by 7%. It is because of the increase of tourist, decrease of cost of transportation and travel time. In order to improve some of the routes in the Philippines, the researcher would like to suggest that the shipping companies should consider to upgrade some vessels. That is to have a vessel with a high-capacity storage for vehicles and goods so that mass transportation made. Another is that the ports need to be upgraded as well.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.114-128
• /
• 2013

Greenhouse gas emissions have been an important issue in different countries because of their effects on global warming. The government has to organize greenhouse gas reduction measures suitable to regional characteristics by establishing annual implementation plans and comprehensive policies based on the UNFCCC. The transportation sector is one of the major contributors of air pollution; hence increasing need to estimate current and future traffic emissions precisely. Under these circumstances, a number of emission models have been developed recently. However, current methods of estimation cannot carry out effective analyses because it does not reflect vehicle movement characteristics. This study aims to present a new method for calculating road traffic emissions in Goyang city. A travel demand model is utilized to carry out GHG emission estimates according the traffic data (fleet composition, vehicle kilometers travelled, traffic intensity, road type, emission factors and speed). This study evaluates two approaches to estimate the road traffic emissions in Goyang City: Pollution-Emis and the Handbook of Emission Factors for Road Transport (HBEFA v.3.1) which is representative of the "average speed" and the "traffic situation" model types. The evaluation of results shows that the proposed emission estimation method may be a good practice if vigilant implementation of model inputs is observed.

• Sleep Medicine and Psychophysiology
• /
• v.3 no.2
• /
• pp.18-31
• /
• 1996

Jet-lag can be defined as the cumulative physiological and psychological effects of rapid air travel across multiple time zones. Many reports have suggested that age-related changes in sleep reflect fundamental changes in the circadian system and in significant declines in slow wave sleep. Jet lag is a dramatic situation in which the changes of the phase of circadian process and homeostatic process of sleep occur. Thus the authors evaluatead the changes of sleep-wake cycle from jet lag by age. Thirty-eight healthy travellers were studied for 3 days before and 7 days after jet-flights across seven to ten time zone. They were aged 19-70, They trareled eastbound, Seoul to North America (USA, Canada). Sleep onset time, wake-up time, sleep latency, awakening frequency on night sleep, awakening duration on night sleep, sleepiness at wake-up and nap length were evaluated. Our results suggest that by the 7 to 10 time zone shift, the old age group was significantly influenced in sleep-wake cycles. The date on which subjective physical condition was recovered was $6.23{\pm}83$ day after arrivals for old age group, while for young and middle age group, $4.46{\pm}1.50$ day and $4.83{\pm}1.52$ day, respectively. In old age group, sleep onset time was later than baselines and could not recover untill 7th day. But in other groups, the recovery was within 5th day. Nap dura fion was longer in old age group through jet lag than younger age group. In other parameters, there was no definite difference among three age groups. Our results suggested that the old age was significantly influenced by the disharmony between internal body clock and sleep-wake cycle needed at the travel site. Thus we proved that recovery ability from jet lag was age-dependent as well as travelling direction-dependent. To demonstrate more definite evidence, EEG monitoring and staging of sleep were funthun encouraged.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.7-16
• /
• 2009

This paper proposes a plan which can raise the accuracy of economic benefit estimation in road construction projects. The point of existing economic appraisals may be that the speeds forecasted by models are different from the field speeds because only volumes are calibrated in the road network. The result of such a calibration has an influence on estimating wrong economic benefits in terms of vehicle operating cost savings, travel time savings, and air pollution savings. Then this study performs a calibration when volumes are at the same amount but the calibration between the field speeds and model speeds is different from each other with two different volume-delay functions; the differences of benefits are confirmed according to two different speed calibrations. Three improvement schemes, including the development of a new volume-delay function, are proposed in this study in order to solve the problem of current benefit calculations. The outcome of this study will help practitioners perform more accurate benefit calculations and reasonable economic appraisals.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2023

This paper introduces urban air mobility (UAM) and the definition and types of vertiports required for UAM operations. It also examines domestic policy trends related to UAM and identifies UAM routes in Seoul currently planned by the government. To do so, we reviewed prior research on vertiports, analyzed new regulations from the European Aviation Safety Agency, and studied domestic vertiport specifications and deployment plans for UAM operations based on the size of the S-A1 airframe being developed by Hyundai, and applied them to Samsung Station, the core area of the demonstration routes. Next, using the 'Travel Time Savings Ratio', a method for evaluating transportation economics, we compared and analyzed the time taken by passenger vehicles and the time saved by using UAMs to derive a highly economical demonstration route. As a result, the Samsung Station↔Cheongnyangri Station section was found to be the most efficient. These findings are expected to be utilized for adjusting the distribution of UAMs when operating the demonstration route in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.109-117
• /
• 2009

This paper presents a linear air bearing stage with compensated motion errors by active control of preloads generated by magnetic actuators with combination of permanent and electromagnets. A 1-axis linear stage motorized with a linear motor with 240mm of travel range is built for verifying this design concept and tested its performances. The three motions of the table are controlled with four magnetic actuators driven by current amplifiers and a DSP based digital controller. Three motion errors were measured combined method with laser interferometer and two-probe method with $0.085{\mu}m$ of repeatability for straightness error. The measured motion errors were modeled as functions of the stage position, and compensation were carried out with feedforward control because the characteristics of the motion control with magnetic actuators are linear and independent for each degree-of-freedoms. As the results, the errors were reduced from $1.09{\mu}m$ to $0.11{\mu}m$ for the vertical motion, from 9.42 sec to 0.18 sec for the pitch motion and from 2.42 sec to 0.18 sec for roll motion.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.

• Korean journal of aerospace and environmental medicine
• /
• v.30 no.3
• /
• pp.83-85
• /
• 2020

In commemoration of Vol. 30, Issue 3, our journal prepared five review articles and one original paper. The global outbreak of COVID-19 in 2020 has impacted our society, and especially the aviation and travel industries have been severely damaged. Kwon presented the aviation medical examination regulations related to COVID-19 announced by the Ministry of Land, Infrastructure, and Transport of the Republic of Korea. Lim summarized various efforts of airlines to overcome the crisis in the aviation industry. He also discussed the management of these aircraft as the number of airplanes landing for long periods increased. Finally, he suggested various quarantine guidelines at airports and onboard aircraft. COVID-19 has had a profound impact on mental health as well as physical effects. Kim investigated the impact of COVID-19 on mental health and suggested ways to manage the stress caused by it. The Internet of Things (IoT) refers to a technology in which devices communicate with each other through wired or wireless communication. Hyun explained the current state of the technology of the IoT and how it could be used, especially in the aviation field. In the area of airline service, various situations arise between passengers and crew. Therefore, role-playing is useful in performing education to prepare and respond to passengers' different needs appropriately. Ra introduced the conceptual background and general concepts of role-playing and presented the actual role-play's preparation process, implementation, evaluation, and feedback process. For a fighter to fly for a long time and perform a rapid air attack, air refueling is essential, which serves refueling from the air rather than from the aircraft base. Koo developed a questionnaire based on the HFACS (Human Factors Analysis and Classification System) model and used it to conduct a fighter pilot survey and analyze the results.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.421-428
• /
• 2019

This study includes services that require six professional guides - health care, exhibition performance, restaurant, shopping, business and daily life - as well as a trip-based tour, along with solving existing problems that may occur on domestic and overseas trips, and proposes services that connect users with proven professional guides. As a result of previous research, the most needed services among overseas travel were air tickets, accommodation, transportation, and guides, but as Korea enters an aging society, professional guide services are expected to increase daily demand. Based on this, the service technology, user scenarios and brand development were presented. This Service Proposal provides users with a personalized guide to knowledge or experience that they have not previously known, providing them with a wealth of experience. In addition, guides can help develop new fields of expertise and help improve professional guides' capabilities. Finally, the platform service is meaningful in that it enables the creation of jobs by enabling everyone to engage in economic activities, as it allows users to provide services through their own capabilities while at the same time being convenient for them.