• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.77-84
• /
• 2013

In this paper, we review two-dimensional measuring methods referring to target patterns. The patterns consist of two linearly-repeated patterns or is designed repeatedly in two-dimension. The repeated properties are reflectivity, refractivity, air-gapping distance, capacitance, magnetic reluctance, electrical resistance and sloping gradient, etc. However, the optical methods are generally used for high speed processing and density, and their encoding principles are treated here. In case of two-dimensional pattern, as there is not inherently error between single units encoding the pattern except for the metrology frame errors, the end-effector position of an object accompanying the pattern can be measured with respect of the global frame without via error. Therefore, it is regarded as a substitute for laser interferometer with severe environmental constraints and has been applied to the high-accurate planar actuator.

• 에너지공학
• /
• 제11권3호
• /
• pp.254-261
• /
• 2002

The fabrication method for the main components of the polymer electrolyte membrane fuel cell stack such as electrodes, membrane-electrode assemblies, and bipolar plates was established for the effective electrode area of 240 ㎠. A counter-flow type 100-cell stack was fabricated by using the above components and then a maximum power of 7.44 kW for H$_2$/O$_2$ and 5.56 kW for H$_2$/air could be obtained at 70$\^{C}$ and 1 atm. It was seen that the distribution of the OCV for unit cells in the stack was uniform but the voltage deviation increased as the load increased due to the IR drop and the electrode polarization. The stack was applied to the power source of the fuel cell/battery hybrid electric golf car. It produced about 1 kW at a room temperature operation during the test run, which occupied about 43% of the total power required by the 2.3 kW motor.

• 에너지공학
• /
• 제18권3호
• /
• pp.156-162
• /
• 2009

내연기관의 연소현상을 연구하는 연구자들에게 엔진 내부의 압력값은 연소과정을 이해 할 수 있는 좋은 데이터가 된다. 본 논문에서는 압력값을 이용하여 스파크 점화기관의 무부하에서의 사이클 연소 변동의 중요한 원인이 무엇인가를 규명한다. 또한 실험기관의 연소실에서 채취한 압력 데이터는 사이클 변동의 연소 해석의 기초 데이터와 연소율 해석 등의 데이터분석을 하는데 사용되었다. 연소변수의 입력변수로써 연료, 공기, 잔류량, 등등이 사이클 변동을 결정하는데 사용되었다.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.99-106
• /
• 2011

This paper deals with engine room layout design optimization of fuel cell electric vehicle (FCEV), which has been proposed as a potential alternative to fossil fuel depletion. Investing the great R&D efforts, the global vehicle manufacturers, especially Honda motor corporate, have shown not prototype vehicle but commercial vehicle using fuel cell in the market recently. In this paper, we analyze cooling performance and flow characteristic in the engine room of newly FCEV, in addition we suggest the optimization process for engine room layout design optimization. The two radiators in the vehicle for fuel cell stack and electronic components cooling have been analyzed and their performance are obtained in terms of cooling performance ratio (CPR). The value of CPR should always be less than one and based on criteria, we have achieved the optimum cooling performance of radiators for stack and electronic components. Aerodynamic performance is evaluated in terms of drag coefficient, improved through underbody modification using air devices.

• 한국대기환경학회지
• /
• 제30권1호
• /
• pp.26-36
• /
• 2014

The uncertainty assessment is important to improve the reliability of emission inventory data. The DARS (Data Attribute Rating System) have recommended as the uncertainty assessment technic of emission inventory by U.S. EPA (Environmental Protection Agency) EIIP (Emission Inventory Improvement Program). The DARS score is based on the perceived quality of the emission factor and activity data. Scores are assigned to four attributes; measurement/method, source specificity, spatial congruity and temporal congruity. The resulting emission factor and activity rate scores are combined to arrive at an overall confidence rating for the inventory. So DARS is believed to be a useful tool and may provide more information about inventories than the usual qualitative grading procedures (e.g. A through E). In this study, the uncertainty assessment for 2009 CAPSS (Clean Air Policy Support System) emission inventory is conducted by DARS. According to the result of this uncertainty assessment, the uncertainty for fugitive dust emission data is higher than other sources, the uncertainty of emission factor for surface coating is the highest value, and the uncertainty of activity data for motor cycle is the highest value. Also it is analysed that the improvement of uncertainty for activity data is as much important as the improvement for emission factor to upgrade the reliability of CAPSS emission inventory.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.519-527
• /
• 1997

AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.47-52
• /
• 1991

주거환경을 침해하는 소음의 주된 요인은 가전제품으로서, 대부분의 가전제 품은 전기모터에 의해 구동된다. 가전제품을 작동시키는 전기모터는 가전제 품에 기진력을 주는 한편 공기중으로 소음을 방사함으로서 조용한 주거환경 을 해치게 된다. 따라서 조용하고 쾌적한 주거환경 확보를 위해서는 가전제 품용 구동모터의 소음을 효과적으로 차단 또는 감소해야 한다. 모터의 소음 원은 그 모터의 종류와 형태에 따라 약간씩은 다를 수 있으나 일반적으로 크게 기계적 소음, 공기 역학적 소음, 전자기 소음, 열/전기 화학적 소음 등 으로 분류된다. 이들 중 모터의 소음에 큰 영향을 주는 것은 기계적 소음, 공기 역학적 소음, 전자기 소음이며 열/전기 화학적 소음은 매우 작은 편이 다. 또한 공기 역학적 소음은 모터에 팬이 부착될 경우에만 큰 문제가 될 뿐 이며, 팬이 부착되지 않을 경우에는 기계적 소음과 전자기 소음이 주된 소음 원이 된다. 기계적 소음과 전자기 소음은 어느 것이 주된 소음원인지는 일반 적으로 잘 알 수 없기 때문에, 개별적인 연구와 실험을 통하여 파악해야 한 다. 기계적 소음은 주로 회전자의 불균형 회전에 의한 진동 및 그로 인한 외 부 프레임의 진동으로 대별되며, 전자기 소음은 주로 공급(Air-Gap)에서의 투과파(permeance wave)와 기자력(magneto-motive force)에 의한 반지름 방향의 힘에 의해 주로 발생된다. 본 연구에서는 기계적 소음과 전자기 소음 중 모터 소음에 영향이 큰 소음원을 판별해 내고 모델 실험을 통하여 감소 방안을 검토하였다.

• 한국융합학회논문지
• /
• 제2권3호
• /
• pp.45-50
• /
• 2011

컴퓨터를 비롯한 고집적 회로를 갖는 시스템의 작동 열 배출이나 열전소자를 이용한 냉난방시스템의 열 이동에는 고성능 열전달 통로가 필요하다. 이와 같은 고효율 열전달 시스템에 효과적으로 대처할 수 있도록 개발된 것이 나노튜브이다. 본 연구의 목적은 방열소자(이하 나노튜브라 한다.) 제조를 위한 공정과 제조시스템을 개발하는데 있다. 지금까지 국내에 보급되고 있는 나노튜브는 대부분 수입에 의존하고 있기 때문에 본 연구는 기술적인 측면에서 방열소자 개발에 기여할 뿐만 아니라 경제적으로는 큰 수입대체효과를 가져 올 것으로 기대된다. 본 연구는 나노튜브의 제조공정과 제조시스템 개발에 대한 전 과정을 보인다.

• 환경정책연구
• /
• 제1권1호
• /
• pp.75-90
• /
• 2002

Methyl tertiary-butyl ether(MTBE) is used as an octane enhancer in gasoline. MTBE can enter the environment at any stage in the production, storage, and transport of undiluted MTBE or MTBE-blended gasoline. Although data on concentrations of MTBE in the environment are not available, modelling of fate of MTBE has provided predictions for concentrations of MTBE in the various media to which humans and other organisms may be exposed. Many individuals do not taste or smell MTBE at the $5{\mu}g/L$ level, and thus may be exposed to higher concentrations for a significant amount of time. MTBE exposure through inhalation is likely to be below health-threatening levels, except for occupational workers such as gasoline station attendants and auto mechanics. It should be stressed, however, that there are important data gaps in our understanding of the acute and chronic toxicity of MTBE. Little or no research concern including being conducted that directly addresses these issues. Rather than any immediate ban on MTBE, I recommend consideration of phasing out MTBE in USA and other countries. During the transition phase, a number of policies are suggested to reduce the risk of using MTBE. One of these policies is that the state should invest in a research program. Such research should, for example, examine effective alternatives for motor vehicle fuels, and detect concentrations of MTBE in ambient air, water, and other environmental media.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.588-590
• /
• 1994

This paper describes current controlled PWM technique of IPM synchronous motors for a wide variety of speed control applications. The IPM synchronous motors have a saliency, in which the q-axis inductance is larger than the d-axis inductance. As a consequence, there exists a reluctance torque component Thus when this component is added to the torque component produced by the stator currents and the air-gap flux, IPM motor drives are readily applicable where full torque Is required up to full or base speed. They are however limited in their ability to operate in the power limited regime where the available torque is reduced as the speed is increased above its base value. This paper reviews the operation of the IPMSM drives when they are constrained to be within the permissible envelope of maximum inverter voltage and current to produce the rated power and to provide this with the highest attainable rotor speed. The wide variety of speed control strategy is analyzed and the performance is investigated by the computer simulation using actual parameters of a drive system. Simulation results are given and discussed.