• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.323-330
• /
• 2000

Early life history and spawning for Odontobutis interrupta were observed in the laboratory during May-August 1999 with a condition of natural habitats in the field. Optimal water temperature for spawning was between 17.5 and 22.$0^{\circ}C$ and appropriate water depth and current velocity in the natural habitat ranged 0.3-0.6 m and 0.1-0.3 m/sec, respectively. Ovary maturation index peaked at about 100mm in the total length and their values gradually decreased after the size. Male fishes showed a territory and courtship behavior to adult females and the males frequently pushed upper-ventral part of females for egg releases. After females spawned, the males guarded the egg masses and supplied dissolved oxygen using pectoral fins. According to observation of egg development in the laboratory, blastodisc formed in 1hr 17 min after the fertilization, cleavaging at 36-minute interval regularly. Blastulation occurred in 7 hr 12 min after the fertilization, with gastrulation after 11 hr 11 mins and formation of york plug after 32 hr 48 min. Embryo was formed in 33 hr 45 min after fertilization and optic vesicles appeared in 47 hr 27 mins when 30-31 somites were formed. Cardiac primordium was formed in 65 hr 15mins and its beat averaged 44- 48 time/min. Pectoral fins were formed in 138 hr 40 min, air-bladder and black vesicles were observed in lower portion of young fish. Embryo hatched from she-11 membrane after about 10 days and juvenile was 5.8$\pm$0.2mm in total length 3.0$\pm$0.5mg in weight.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.467-479
• /
• 2009

The purpose of this study was to present the quantitative data which riders can utilize teaching field by comparison analysis of kinematics according to skill level of rider during 2 strides rising trot with the JeJu's-Horse. Participated subjects was consisted of total 10 riders(unskilled: n=5, skilled: n=5). The method of experiment & analysis was based on 3D cinematography. Variables were consisted of temporal, linear & angular kinematics by each event & phase. The skilled assigned more ratio of elapsed time in air than support phase, had the less range of motion in up-down direction and more consistent velocity in lateral & forward direction and performed periodic up-down movement with alignment in vertical direction according to elapsing of phases. The skilled more flexed at elbow and extended backwardly according to elapsing of phases, while more flexed forwardly at hip & knee and plantarflexion at ankle. The skilled postured backward extension but the unskilled do forward flexion. That is, It was considered that the unskilled continued more unstable posture than the skilled during 2 strides in rising trot.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.350-361
• /
• 1996

The objectives of this study mere 1) to investigate whether the different nonwoven fabric types influenced on the objective and subjective wear performances of the experimental pesticide protective pants, 2) to detect whether the different finishes treated to the nonwoven fabrics influenced on the objective and subjective wear performances of the experimental pants, and 3) to detect the relationships between objective wear performances and subjective wear sensation. Three types of nonwoven fabrics (T (Tyvek$\textregistered$), 5 (Sontara$\textregistered$) and K (Kimlon$\textregistered$)) were used as test specimens. By pad-dry.cure method, each of the specimen was treated with fluorocarbon compound for water-oil repellent finish (Tw, Sw, Kw). And each of specimen was treated with organic silicon quarternary ammonium salts and then treated with fluorocabon compound for dual functional finish (76, 50, Kd). Using the three water-oil repellent finished fabrics and the three dual functional finished fabrics, six experimental protective pants (Cl (Tw), C2 (Sw), C3 (Kw), C4 (76), C5 (56), C6 (Kd)) were made according to the same pattern suggested by the Rual Guidance Office. The wear trials of experimental pesticide protective pants were performed in a conditioned vinyl plastic hothouse ($30\pm1^{\circ}C$, $70\pm5%$R.H., 0.25m/sec air velocity). The measurements of skin temperature, microclimate temperature and humidity on the subjects were obtained by the themohygromenter. The subjective wear sensations were measured using previously developed thermal, humidity and overall comfort scales. The results obtained from this study were as follows: 1) There were siginificant differences among nonwoven fabric types on the objective and subjective wear performances, therefore, the skin temperature, microclimate temperature and humidity of subjects who wore the experimental pants made with Sontara were siginificantly lower than those who wore the others. And, the experimental pants made with Sontara were assessed as more comfortable than the others in terms of the subjective thermal, humidity and overall wear sensations. 2) There were no significant differences between two finish types on the objective and subjective wear Performances. 3) The microclimate humidity on the thigh was highly correlated with the overall subjective comfort sensations and the next highly correlated one was the mean skin temperature. That is, the higher the microclimate humidity and the mean skin temperature, the higher the overall subjective comfort sensation ratings which mean the overall subjective sensation was very uncomfortable.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.223-232
• /
• 2001

To study the stabilization characteristics of diffusion flame formed in the wake of a cylindrical bluff body with fuel injection, the flame stability limits, length and temperature of recirculation zone of flame, turbulence intensity distribution near the recirculation zone of flame were measured and analyzed. The length of recirculation zone is independent on main fuel injection quantity, but it is dependent on fuel injection angles, air stream velocity, and auxiliary fuel injection into recirculation zone. For diffusion flame, in general, the flame stabilization is deteriorated with increase of he length of recirculation zone, but if the turbulence generator is installed, the flame stabilization is improved with increase of the length of recirculation zone. The temperature of recirculation zone is dependent on fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators, and it dependent on fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators, and it has a maximum value at the condition of each theoretical mixture. In general, the more temperature of recirculation zone is low, the more flame is stable. But when the turbulence generator is installed, the more temperature of recirculation zone is low, the more flame is unstable. The turbulence intensity in the wake of bluff body is increased with increase of diameter or blockage ratio of grid. The more turbulence intensity is increased by installation of turbulence generator, the more flame is unstable. Finally, It is clear that the stabilization characteristics of diffuser flame can be controlled by some parameters such as fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.451-457
• /
• 2006

We synthesized phase pure CrN having surface areas up to $47m^2/g$ starting from $CrCl_{3}$ with $NH_{3}$. Thermal Gravimetric Analysis coupled with X-ray diffraction was carried out to identify solid state transition temperatures and the phase after each transition. In addition, the BET surface areas, pore size distributions, and crystalline diameters for the synthesized materials were analyzed. Space velocity influenced a little to the surface areas of the prepared materials, while heating rate did not. We believe it is due to the fast removal of reaction by-products from the system. Temperature programmed reduction results revealed that the CrN was hardly passivated by 1% $O_{2}$. Molecular nitrogen was detected from CrN at 700 and $950^{\circ}C$, which may be from lattice nitrogen. In temperature programmed oxidation with heating rate of 10 K/min in flowing air, oxidation started at or higher than $300^{\circ}C$ and resulting $Cr_{2}O_{3}$ phase was observed with XRD at around $800^{\circ}C$. However the oxidation was not completed even at $900^{\circ}C$. CrN catalysts were highly active for n-butane dehydrogenation reaction. Their activity is even higher than that of a commercial $Pt-Sn/Al_{2}O_{3}$ dehydrogenation catalyst in terms of volumetric reaction rate. However, CrN was not active in pyridine hydrodenitrogenation.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.107-113
• /
• 2003

This study was carried out to improve the performance of pre-developed heat recovery devices attached to exhaust-gas flue connected to combustion chamber of greenhouse heating system. Four different units were compared in the aspect of heat recovery performance; A-, B-, and C-types are exactly the same with the old ones reported in previous studies. D-type newly developed in this experiment is mainly different with the old ones in its heat exchange area and tube thickness. But airflow direction(U-turn) and pipe arrangement are similar with previous three types. The results are summarized as follows; 1. System performances in the aspect of heat recovery efficiency were estimated as 42.2% for A-type, 40.6% for B-type, 54.4% for C-type, and 69.2% for D-type. 2. There was not significant improvement of heat recovering efficiency between two different airflow directions inside the heat exchange system. But considering current technical conditions, straight air flow pattern has more advantage than hair-pin How pattern (U-turn f1ow). 3. The main factors influencing on heat recovery efficiency were presumably verified to be the total area of heat exchange surface, the thickness of ail-flow pipes, and the convective heat transfer coefficient influenced by airflow velocity under the conditions of allowable pipe durability and safety. 4. Desirable blower capacity for each type of heat recovery units were significantly different to each other. Therefore, the optimum airflow capacity should be determined by considering in economic aspect of electricity required together with the optimum heat recovery performance of given heat recovery systems.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.231-238
• /
• 1983

An investigation on optimum condition for processing of salted-dried sardine and quality change of the product during the storage was carried out. The fillets of sardine were salted in 5, 10 and $15\%$ NaCl solution for 12, 24 and 36 hours at $9-10^{\circ}C$, respectively and air-blast dried at $24-25^{\circ}C$ with a velocity of 3 m/sec and then stored at room temperature for 30 days. The results were as follows : The optimum condition for the product was salting in $15\%$ NaCl solution for 36 hours as VBN and histamine contents were 27.5 mg/100g and 42.5 mg/100g, respectively, and also showed a good result in sensory evaluation. Histamine, VBN and TMA-N content of the dried fillets immediately after salting in $15\%$ NaCl solution for 36 hours increased to 47.8 mg, 29.5 mg and 5.4mg per 100g of the sample, respectively and increased slowly during the storage. The peroxide value and acid value of the lipid extracted from the product increased from 15.9 meq/kg to 114.0 meq/kg, and 12.6 to 30.5 during the storage. In the fatty acid composition, $C_{22:6}\;and\;C_{20:5}$ acids were decreased during the storage period.

• Journal of The Korean Association For Science Education
• /
• v.19 no.1
• /
• pp.8-18
• /
• 1999

The purpose of this study is to investigate middle school student's conceptual change about Force and Motion by the courseware based on constructivism. It is well known to science educators that misconcrptions about physics concepts are hardly changed into scientific ones. So as to change student's misconceptions about force and motion, the courseware was developed through the analysis of students' conceptions. 20 students were tested before and after learning through the courseware. One of the questions was about the direction of force acting on the ball thrown in the air when it is rising, at the top, and falling. The other was about the magnitudes and directions of forces acting on a car when it is accelerating, in uniform velocity, and decelerating. The results are as follows: In case of vertical motion, all students had misconceptions before learning, but after learning 5 students(25%) have changed their ideas into scientific ones. In case of horizontal motion, 9(45%) out of 20 students who had misconceptions about force and motion have changed their ideas into scientific ones.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.763-768
• /
• 2002

This study was performed in the airlift bioreactor using the nitrifier consortium entrapped in polyvinyl alcohol(PVA) for removing low concentration total ammonia nitrogen(TAN). At the superficial air velocity of 0.83 cm/sec, TAN removal rate and removal efficiency was $316.6{\pm}7.2g/m^3{\cdot}day$ and $92.8{\pm}2.2%$ respectively. Removal rate was continuously increased with decreasing hydraulic residence time(HRT) from 0.5 hr to 0.05 hr, whereas removal efficiency decreased with decreasing HRT. The optimum temperature for nitrification was $30^{\circ}C$ at which removal efficiency was $95.5{\pm}1.5%$. Nitrification was effectively performed at low temperature, $10^{\circ}C$. In the pH range from 7 to 9 in the bioreactor, removal rate and removal efficiency was $310{\pm}10g/m^3{\cdot}day$ and $94{\pm}3%$ respectively.