• 에너지공학
• /
• 제11권4호
• /
• pp.306-316
• /
• 2002

본 연구에서는 공기청정기의 최적설계에 필요한 자료를 획득하기 위해 다양한 실내공간에서의 유동에 대한 연구를 수치해석적인 방법으로 수행하였다. 실내유동 해석을 위해서 사용된 공기청정기의 사용처로는 물류창고, 아파트 거실과 주방, 6인 병실을 선정하여 계산을 수행하였다 시간에 따른 평균농도 변화는 모든 실내공간에서 완전 혼합(perfect mixing)인 경우와 매우 흡사하게 나타나는 것을 볼 수 있었고, 공기청정기의 설치 위치가 시간에 따른 실내의 평균농도 변화에 미치는 영향은 미미한 것을 볼 수 있었다. 실내의 국부적인 농도를 살펴보면 사용처 별로 유동의 흐름이 원활하지 못해서 생기는 공기정화 취약구 역을 관찰할 수 있었으며, 이는 각 공간모델과 공기청정기의 설치위치에 따라 크게 달라지는 것을 볼 수 있었다.

• 설비공학논문집
• /
• 제24권7호
• /
• pp.545-552
• /
• 2012

The objective of this study is to analyze the effect on the energy consumption of an instant cooling type water purifier by the design parameters of the cooling tank. Initially, the simulation program was developed and verified. The simulation results showed that the energy consumption was reduced by replacing the shape of the cooling tank from a rectangular to a cube, increasing the evaporator length, decreasing the volume of the cooling tank, and increasing the performance of the insulator. The order of the effect magnitude on the energy consumption was as follows; volume of the cooling tank, conductivity and thickness of the insulator, shape of the cooling tank, length of the evaporator, and length of the water tube.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1303-1308
• /
• 2011

In the modern society various types of transportation mode are utilized, among them the subway system is the one of the main transportation mode which more than 7.21 million people ride a day. Because of interests on the indoor air quality (IAQ) of underground public facilities, concerns on IAQ of subway system by many people are increasing. There are several approach to improve IAQ of subway station, such as installing platform screen door (PSD), frequent tunnel washing-out, and etc, however there has not been any attempt to improve IAQ of subway cabin inside. Most technologies for removing airborne particulate matters are known to be difficult to adopt on the subway cabin since the problem of maintenance cost. Therefore, the ultimate object of this study is a practical development of cabin air cleaning system which can reduce the concentration of airborne particles and harmful gases at the same time. The subway cabin air purifier (SCAP) was developed for removing particulate matters and gases pollutants inside a cabin. The whole system was designed and the roll-filter device was manufactured based on numerical prediction results. It is expected that SCAP could reduce indoor air pollutants in the subway cabin practically and it can be applied to other part of transportation vehicles.

• 한국항해항만학회지
• /
• 제40권1호
• /
• pp.1-6
• /
• 2016

본 연구에서는 선박에서 발생하는 대기오염물질을 처리하기 위해 사용되는 습식 스크러버를 이용한 배기가스 세정시스템(EGCS: Exhaust Gas Cleaning System)에서 발생되는 폐수를 재이용 할 수 있는 순환시스템을 개발하기 위해 진행되었다. 선박 배기가스 DePM, DeSOx 순환처리장치 (Recycle system)의 세정수의 입자성물질과 분산유를 효과적으로 제거할 수 있는 수 처리 시스템을 개발한 결과 원심분리형 Purifier만으로는 미세한 분산유의 처리가 어렵다는 결과가 도출되어 원심분리형 Purifier 후처리로 유수분리 경사 분리판을 이용한 유수분리기의 일종인 Coalescer를 본 시스템에 적용하였다. Coalescer는 2차 분산 상태의 에멀젼화 된 미세 기름입자를 합착시켜 분리하는 기술이다. 선박 배기가스 DePM, DeSOx 순환처리장치 (Recycle system)에서 배출되는 세정수를 Purifier와 Coalescer를 이용하여 처리한 결과 입자성물질은 55% 분산유는 유입수 대비 99%이상 처리되는 것을 확인하였다. 따라서 선박 대기오염 저감을 위한 습식세정탑 시스템에 본 세정수 처리시스템을 도입하면 세정수로서 재사용이 가능하다고 판단된다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2006년도 춘계학술대회 논문집
• /
• pp.472-474
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.114-117
• /
• 2005

An expert system is a system that employs human knowledge captured in a computer to solve problem that ordinarily require human expertise. Well-designed expert systems imitate the reasoning processes experts use to solve specific problem. Specially, expert systems are used to the engineer in manufacturing industry for the process control, production management and system management. In this paper, we propose the design process expert system for product design process in manufacturing industry and we present introduction and contents of design process expert system methodology and software for the air purifier design system. This system will be helpful to improvement of design process for the air purifier production.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 동계학술대회 논문집
• /
• pp.65-65
• /
• 2004

• 한국의학물리학회지:의학물리
• /
• 제27권3호
• /
• pp.156-161
• /
• 2016

When air discharged from a radioisotope production facility is contaminated with radiation, the public may be exposed to radiation. The objective of this study is to manage such radiation exposure. We measured the airborne radioactivity concentration at a 30 MeV cyclotron radioisotope production facility to assess whether the exhaust gas was contaminated. Additionally, we investigted the radioactive contamination of the air filter for efficient air purification and radiation safety control. To measure the airborne radiation concentration, specimens were collected weekly for 4 h after the beginning of the radioisotope production. Regarding the air purifier, five specimens were collected at different positions of each filter-pre-filter, high-efficiency particulate air filter, and charcoal filter-installed in the cyclotron production room. The concentrations of F-18, I-123, I-131, and Tl-201 generated in the radioiodine production room were $13.5Bq/m^3$, $27.0Bq/m^3$, $0.10Bq/m^3$, and $11.5Bq/m^3$, respectively; the concentrations of F-18, I-123, and I-131 produced in the radioisotope production room were $0.05Bq/m^3$, $16.1Bq/m^3$, and $0.45Bq/m^3$, correspondingly; and those of F-18, I-123, I-131, and Tl-201 generated in the accelerator room were $2.07Bq/m^3$, $53.0Bq/m^3$, $0.37Bq/m^3$, and $0.15Bq/m^3$, respectively. The maximum radiation concentration of I-123 generated in the radioiodine production room was 1,820 Bq/g, which can be disposed after 2 days. The maximum radiation concentration of Tl-202 generated in the radioisotope production room was 205 Bq/g, and this isotope must be stored for 53 days. The I-123 generated in the radioiodine production room had a maximum concentration of 1,530 Bq/g and must be stored for 2 days. The maximum radiation concentration of Na-22 generated in the radioisotope production room was 0.18 Bq/g and this isotope must be disposed after 827 days. To manage the exhaust, the efficiency of air purification must be enhanced by selecting an air purifier with a long life and determining the appropriate replacement time by examining the differential pressure through systematic measurements of the airborne radiation contamination level.

• 한국조경학회지
• /
• 제28권5호
• /
• pp.87-92
• /
• 2000

The purpose of this study is to investigate Ozone which we have to contact in our daily lives. Recently Ozone becomes a serious pollutant in the inside and outside. To select th indicator plants or the purifier plants for air pollution caused by ozone, this stud has been conducted with interior landscape plant of 10 species. The results are as follows; 1) The visible demage by Ozone was firstly observed on Viburnum awabuki among 10 species, and it occurred after the lapse of 10, 8 and 4 hours on 0.5, 1.0 and 2.0 ppm ozone treatment, respectively. The first symptom of visible demage appeared on chlorosis or blotting of leaves, then progressed on necrosis of leaves. 2) On the other hand, Litsea japonica and Ardisia japonica were so resistant against Ozone fumigation that they were not demage independently of Ozone concentration till the lapse of 60 hours. 3) Chlorophyll contents were decreased by the increased Ozone concentration. At this time, grana destruction was observed. The most sensitive plant to ozone was Viburnum awabuki, and we suggest that Viburnum awabuki would be possible one to use for the indicator plant. The most resistance plant to Ozone was Litsea japonic and Ardisia japonica, we suggest that Litsea japonica and Ardisia japonica would be possible to use for the purifier plant for Ozone pollution.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.31-36
• /
• 2016

For the purpose of indoor air purification, air conditioner or purifier is generally used, but the long operating time induced the contamination by cumulation of bacteria in the air filter. The ozone sterilization method can be one of the effective sterilization method for this case. Ozone has not leave a secondary residual contaminants, as well as a strong sterilization power. In this study, nonthermal plasma technology is investigated as an ozone generator for the air filter sterilization. Additionally, nonthermal plasma technology is possible to obtain the generation of negative ions and electrostatic force by simply adjusting the applied voltage.