• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.1
• /
• pp.73-81
• /
• 1997

In this experimental study, the air cooling radial shape heat exchanger which influences on the COP and the cooling capacity by heat and mass transfer rate in the adsorbent bed was designed and applied to test its performance for adsorption heat pump(AHP). Zeolite-water was used for the adsorbent-adsorbat pair. As a result, the cooling COP and a cycle period of this adsorption heat pump are 0.28 and 2 hours, respectively, on the condition of none heat recovery from the adsorption reactor(absorber). The other results and recommendations are mainly related to improving the heat and mass transfer inside the absorber to reduce a cycle period.

• Journal of Software Engineering Society
• /
• v.26 no.3
• /
• pp.63-76
• /
• 2013

We need to measure the quality of each module to assess software quality. Especially, in industry, it is important to measure quality of modules quantitatively in order to improve bad modules and reuse good modules. In this paper, we define moduleness as characteristic that modules should be possessed and propose a method to measure software moduleness quantitatively. A case study conducted in this paper shows the usefulness of the method by measuring and evaluating moduleness of modules based on open source software developed by C, C++ and Java languages.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.7-18
• /
• 2003

Due to the changes of shipping and logistic environment, Asian ports today face severe competition. To be a mega-hub port, Asian ports have achieved a big scale development. For these reasons, it has been widely recognized as an important study to analyze and evaluate characteristics of Asian ports, from the standpoint of Korea where Busan Port is located. Although some previous studies have been reported, most of them have been beyond the scope of Asian ports and analyzed the world's major ports; moreover, the studied ports have been about the ports which are well known from the previous research and reports. So, most studies is unlikely to be used as substantial indicators from the perspective of Busan Port. In addition. most of the existing studies have used hierarchical evaluation algorithm for port ranking, such as AHP (analytical hierarchy process) and clustering analysis. However, these two methods have fundamental weaknesses from the algorithm perspective. The aim of this study is to classify major Asian ports based on competitiveness level. Especially. in order to overcome serious problem of the existing studies, major Asian ports were analyzed by using objective indicators. and Fuzzy C-Means algorithm, which alleviates the weakness of the clustering method. It was found that 10 ports of 16 major Asian ports have their own phases and were classified into 4 port groups. This result implies that some ports have higher potential as ports to lead some zones in Asia. Based on those results. present status and future direction of Busan port were discussed as well.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.52-62
• /
• 2017

The purpose of this study is to develope an assessment method for parking lot remodeling alternative by adopting the asset management technique. In order to identify the Level of Service(LOS) and the Evaluation Measurement(EM), literatures was implemented which documented the consideration of parking lot plan, needs of the apartments' tenant, and various design standards. In addition, the authors conducted a three-time delphi survey for the identified 5 LOS and 19 EM to evaluate suitability and necessity of them and to collect additional opinion of experts. The LOS of parking lot were categorized into 5 areas such as Environmental effect and Convenience, Accessibility and so on. The 19 EM were determined to estimate the LOS quantitatively. The researchers analyzed the degree of importance of LOS and EM by using the Analytic Hierarchy Process (AHP) method. But construction cost was excepted from the analysis, because it is used as an independent variable in alternative assessment. In conclusion, the authors proposed the estimation criteria for EM, and the method and process for alternative assessment be performed to benefit-cost analysis using the LOS variation and construction cost. The assessment method for parking lot remodeling alternative was demonstrated effective to assess the parking lot remodeling alternative by case-study. This study has a academic significance by adopting the asset management techniques in the area of the parking lot remodeling. And the assessment method is expected to help deciding a reasonable remodeling alternative of parking lot, as it ensures the diversity for remodeling of the parking lot and reflects the needs of the occupant.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.672-680
• /
• 2011

The purpose of this study has been carried to develop a criterion for the selection of evaluation factors on Forest Carbon Cycle Community(F.C.C.C) based on the result of survey of 96 participants who were operation managers on mountain eco village(31), relevant experts(33), and officers of local government(32). For analysis of the results of survey, DHP(Delphi Hierarchy Process) method was used which is a combination of Delphi method and AHP(Analytic Hierarchy Process) method. The key factors on selection of a suitable area to launch F.C.C.C. project of Korea Forest Service was selected under three hierarchical classes. Class 1 comprises 3 indices(Physical resource index, Human resource index, Vision index), and Class 2 which contains 10 indices (Existing resource, Surroundings resource, Forest biomass resource, Humanities Social quality, Local resident participation, Leader's ability, External support, Planning of operation, Capability of operation, and Effect of operation). Class 3 is sub-level class of class which possess 38 indices. From the results of analysis, Consistency Index(C.I) of each index in the 3 classes was used as evaluation factor. In Class 1, index 'human resources' showed highest Consistency Index(0.454). In Class 2, index 'forest biomass resources' was the highest Consistency Index(0.376) in 'physical resources' of Class 1, index 'leader's ability' was the highest Consistency Index(0.326) in 'human resources' of Class 1, and index 'planning of operation' was the highest Consistency Index(0.346) in 'vision' of Class 1. In Class 3, relative importance of 38 index including 'Joint ownership land security(C.I.-0.266)' was evaluated. Based on the result of this study, a criterion for the selection of evaluation factors for F.C.C.C was developed and the evaluation criterion is expected to be use to select of a suitable area to launch F.C.C.C. project since 2011.

• Clean Technology
• /
• v.26 no.3
• /
• pp.168-176
• /
• 2020

The introduction of the Korea toxics use reduction (TUR) program to build a clean society is generally evaluated based on social economic criteria. Among various techniques, benefit-cost analysis is the most commonly used. This method is focused on the calculation and comparison of all the benefits and costs attributable to the TUR program. However, since it is reasonable to consider not only economic criteria but also policy criteria in the process of evaluation, it is necessary to reflect on the criteria weights found in the benefits and costs. This study aims at developing a new evaluation technique to achieve this purpose and apply it to the Korean TUR program to be implemented in 2020. This study selected competitiveness, toxic substances' emission reduction ratio, and health improvement as policy criteria. The Analytic Hierarchy Process (AHP) technique was initially used to calculate the weight and then, based on the results, the concept of information entropy introduced by Claude Shannon was used to eliminate subjective bias. As a result of the study, it was found that the revised benefit-cost analysis considering the weights of the policy criteria, as well as the existing economic criteria, could be a reasonable alternative in evaluating the feasibility of TUR regulations for highly toxic substances.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.52-58
• /
• 2016

In this study, evaluation method for LNG plant FEED is suggested and its validity is confirmed using a well-known decision making technique of Analytic Hierarchy Process (AHP). It is a pairwise comparison technique which can be used when multiple options must be considered for a single decision making problem. In order to develop an objective decision methodology, various decision parameters, sub-parameters as well as the concept of scale of assessment were introduced, and its consistency among these parameters was also checked by calculating the consistency index (C.I.). The methodology suggested in this article will contribute in evaluation of LNG plant FEED with less bias and subjectivity associated with the decision making procedure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.259-263
• /
• 2006

정부주도의 연구개발 프로그램에 있어서 체계적인 평가가 필요하다는 점에 대해서는 그간 정부 및 민간에서 지속적으로 제기되어왔다. 이는 기술에 대한 중요성을 인식하면서 연구개발에 대한 민관의 절대적 자원투입은 급격하게 증가하여 온 반면, 질적인 효율성 측면에서 새로운 단계로의 도약이 필요하다는 광범위한 문제인식에 근거한 것이다. 하지만, 그간의 국내 기술평가는 크게 연구비 배정 등 경영-행정적인 목적을 가지고 행하여 온 평가와 연구개발진을 중심으로 연구대상 기술의 특성을 반영한 연구로 양분되어왔다. 즉, 평가의 항목이나 가중치 등의 선정에 있어서 기술개발 당사자와 경영자 및 평가전문가 간의 기술가치평가에 대한 격차가 크게 존재하여왔다. 1990년 이후 우리나라에서도 체계적인 기술가치평가의 필요성이 증대되면서 이에 대한 다양한 연구가 진행되었지만, 기존의 두 측면간의 격차는 크게 좁혀지지 못하고 있는 실정이다. 이는 기술가치 평가가 주로 투자용으로 치우침에 따라 경영적 측면이 강조되는 반면 기술개발자들이 중시하는 R&D 측면에서의 가치가 충분히 반영되지 못한 결과라고 할 수 있다. 따라서 많은 연구들이 본연의 가치를 충분히 입증받지 못하고, 단지 경영적인 측면에서 바라본 단편적인 이유로 사장되는 일이 발생하고 있다. 이를 막기 위해 기술적 측면과 경영적 측면이 함께 하는 학제간(interdisciplinary), 또는 기술-경제(Engineering-Economy) 가치평가 연구가 필요하다고 할 수 있다. 본 연구에서는 과학기술부의 21C 프론티어 사업 중 하나인 수자원의 지속적 확보기술개발사업단에서 개발 중인 수자원의 지속적 확보기술을 대상으로 기술가치평가 모형을 구축하였다. 수자원의 지속적 확보기술의 가치를 평가하기 위해서는 위에서 언급한 기존 기술가치 평가방법의 문제점을 해결해야 할 뿐만 아니라 추가로 공공재 및 필수재의 성격을 갖는 수자원의 특성을 반영할 수 있는 기술가치평가 모형의 구축이 요구된다. 이에 본 연구에서는 효율적인 R&D 투자 정책 수립과 정부정책수립에 기여하고자 AHP(Analytic Hierarchy Process, 계층 분석 과정)기법을 이용, 수자원의 지속적 확보기술의 특성에 따른 4개의 평가기준과 26개의 평가속성으로 이루어진 2단계 기술가치평가 모형을 구축하였으며 2개의 개별기술에 대한 시범적용을 실행하였다.

• Journal of Information Technology Services
• /
• v.17 no.2
• /
• pp.83-100
• /
• 2018

Demand for stone products used as building materials is increasing. The construction industry, the value of the stone industry is sufficient, but the domestic stone industry is very lag regarding IT utilization. However, the overseas stone industry produces high-quality products using IT. In this study, we want to offer an IT application technology priority fit for the stone industries. We identify the current status and production process of the stone industries, then set the priority of various IT, so that obtain competitiveness in the domestic stone industries, and minimize the gap between the overseas stone industries. Therefore, we used AHP method; stone industry production processes were selected as the Enterprise Operation Management, Quarrying, Manufacturing, Construction and Maintenance of first-tier. The second-tier ones are consisted of 30 factors out of IT elements. Focus group interviews were conducted to confirm the validity of each factor. As a result, most important factors of first-tier was selected as the order of Manufacturing, Quarrying, Enterprise Operation Management, and Construction & Maintenance. The top 5 of 30 factors in the second-tier were selected Smart Sensor, Mobile Device, Robot of manufacturing, GIS of quarrying, and SCM of enterprise operation management. And the factor that relatively less important was GPS of construction and maintenance. If properly applied an IT application technology for stone industry, we expect to provide efficient production lines and increase customer satisfaction, which will ultimately expand the promotion for the industry and thus act as positive factor in promoting the stone industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.673-681
• /
• 2007

The integration of Quality Circles and Six-Sigma has gained attentions for the attainment of enhanced customer satisfaction, costs reduction, and improved business performance. The purpose of this paper is to verify the benefit from the integration of Quality Circles and Six-Sigma by applying the integrated process for an alcohol manufacturing line. In the integrated process, we used the first three steps of Six-Sigma of Define, Measure, and Analyze(D-M-A) and then applied the concept of Quality Circle, which has good performance in the Improvement and Control(I-C) process. For the selection of the theme of quality circles, Analytic Hierarch Process(AHP) is used, and we also employed the experimental design, which is designed to find an optimal operating condition. Furthermore, the results of the economic analysis confirm that the integration process would be successful in reducing the incidence of defects and the quality cost.