• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.163-166
• /
• 2001

초음파를 이용하여 인체 조직의 특성을 알아내는 방법은 매우 광범위하게 응용되어 오고있다. 그 중에서 초음파를 발생시킨 후 반사되어 되돌아오는 신호를 측정하여 그 감쇠 정도로부터 조직의 특성을 추정하는 방법이 많이 사용되고 있다. 이러한 감쇠현상은 발생된 초음파가 조직 내에서 흡수 또는 산란현상을 거치면서 주파수가 변이를 일으키기 때문에 발생한다. 따라서, 조직의 감쇠 특성을 알아내기 위해서, 주파수의 함수로 근사할 수 있는 감쇠 계수(attenuation coefficient)를 이용하여 시간에 따라 달라지는 주파수 변화를 추정한다. 그러나, 기존의 Ah(Auto-Regressive) 모델을 통한 시간영역 및 주파수 영역에서의 추정 방법을 사용하면 잡음이 존재하는 상황에서 시변 신호를 추정하는데 성능이 많이 저하된다. 본 논문에서는 이러한 단점을 보완하기 위해서, 가변 망각 인자와 재귀적인 TLS(Total Least Squares) 방법을 사용하여 시간에 따라 변하는 신호를 정확하게 추정하고 잡음환경에도 강인한 알고리듬을 제안하였다. 또한, 제안된 알고리듬은 추정 성능을 향상시킬 뿐 아니라 감쇠정도의 강약에 관계없이 망각인자의 값을 적응적으로 변화시켜 동작하는 장점을 가진다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.7-8
• /
• 2005

Silicon(Si) nanowires have been grown by thermal chemical vapor deposition using the 20h ball-milled SiO powders under controlled conditions without the catalyst. For the synthesis of Si nanowires, $Al_2O_3$ substrates were used. Current-Voltage(I-V) and photoresponses were measured for the single Si nanowire in vacuum at room temperature. The light sources for these measurements were the 325 nm wavelength line from a He-Cd laser and the 633 nm wavelength line from a He-Ne laser. The intensity of the photoresponse is independent of the illumination time. And rise and decay times of the photoresponses are shorter than 1 sec.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.1
• /
• pp.16-21
• /
• 2011

$Li_4Sn_xTi_{5-x}O_{12}$ was manufactured by high energy ball milling (HEBM) and used as an anode material for lithium ion battery. Various amount of $SnO_2$was added to $Li_4Ti_5O_{12}$ and heated at different temperatures. The purpose of this research was to see the effect of $SnO_2$ addition into $Li_4Ti_5O_{12}$. Manufactured samples were analyzed by TGA, XRD, SEM, PSA. Battery cycler was used to test the charge/discharge properties of active materials. Heat treatment temperature of $800^{\circ}C$ was needed to make a stable structure of $Li_4Sn_xTi_{5-x}O_{12}$ and the particle size distribution was $0.2{\sim}0.6\;{\mu}m$. Charge/discharge process was repeated for 50 cycles at room temperature. The initial capacity was 168mAh/g and the voltage plateau was observed at 1.55V(Li/$Li^+$).

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.13-23
• /
• 2023

This study is an experimental study on the single group pre-post test design for the effects of the aroma inhalation method with roll-on on stress, pain, depression and blood pressure of the elderly. 33 elderly people who met the selection criteria participated among the elderly using the senior citizen clubs located in S city, Gyeonggi-do. The data collection period was from November 14, 2022 to December 19, 2022. A questionnaire consisting of stress, pain, depression, and blood pressure was measured before and after the aroma roll-on inhalation intervention. The components of aroma essential oil included Marjoram, Geranium, Peppermint and Orange sweet that were diluted in Jojoba oil which was the carrier oil. The aroma inhalation method with roll-on was carried out 3 times day for 4 weeks. In the result of this study, the aroma inhalation method with roll-on were statistically significant differences in stress(t=2.63, p=.013), pain(t=2.46, p=.019), and systolic blood pressure(t=3.01, p=.005) of the participants. Therefore, aroma roll-on therapy is expected to be available as a useful nursing intervention method for reducing stress, relieving pain, and managing blood pressure in the elderly using the senior citizen clubs.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.204-212
• /
• 2008

The purpose of this study was to compare the apical microleakage in root canal filled with Resilon by methacrylate-based root canal sealer or 2 different self-adhesive resin cements. Seventy single-rooted extracted human teeth were sectioned at the CEJ perpendicular to the long axis of the roots with diamond disk. Canal preparation was performed with crown-down technique using Profile NiTi rotary instruments and GG drill. Each canal was prepared to ISO size 40, .04 taper and 1 mm short from the apex. The prepared roots were randomly divided into 4 experimental groups of 15 roots each and 5 roots each for positive and negative control group. The root canals were filled by lateral condensation as follows. Group 1: Gutta-percha with AH-26, Group 2: Resilon with RealSeal primer & sealer, Group 3: Resilon with Rely-X Unicem, Group 4: Resilon with BisCem. After stored in $37^{\circ}C$, 100% humidity chamber for 7 days, the roots were coated with 2 layers of nail varnish except apical 3 mm. The roots were then immersed in 1% methylene blue dye for 7 days. Apical microleakage was measured by a maximum length of linear dye penetration after roots were separated longitudinally. One way ANOVA and Scheffe's post-hoc test were performed for statistical analysis. Group 1 showed the least apical leakage and there was no statistical significance between Group 2, 3, 4. According to the results, the self adhesive resin cement is possible to use as sealer instead of primer & sealant when root canal filled by Resilon.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.204-212
• /
• 2008

The purpose of this study was to compare the apical microleakage in root canal filled with Resilon by methacrylate-based root canal sealer or 2 different self-adhesive resin cements. Seventy single-rooted extracted human teeth were sectioned at the CEJ perpendicular to the long axis of the roots with diamond disk. Canal preparation was performed with crown-down technique using Profile NiTi rotary instruments and GG drill. Each canal was prepared to ISO size 40, .04 taper and 1 mm short from the apex. The prepared roots were randomly divided into 4 experimental groups of 15 roots each and 5 roots each for positive and negative control group. The root canals were filled by lateral condensation as follows. Group 1: Guttapercha with AH-26, Group 2: Resilon with RealSeal primer & sealer, Group 3: Resilon with Rely-X Unicem, Group 4: Resilon with BisCem. After stored in $37{\circ}C$, 100% humidity chamber for 7 days, the roots were coated with 2 layers of nail varnish except apical 3 mm. The roots were then immersed in 1% methylene blue dye for 7 days. Apical microleakage was measured by a maximum length of linear dye penetration after roots were separated longitudinally. One way ANOVA and Scheffe's post-hoc test were performed for statistical analysis. Group 1 showed the least apical leakage and there was no statistical significance between Group 2, 3, 4. According to the results, the self adhesive resin cement is possible to use as sealer instead of primer & sealant when root canal filled by Resilon.

• School Mathematics
• /
• v.17 no.2
• /
• pp.309-329
• /
• 2015

This study is to provide didactical implications for teaching and learning of radian through a analysis of investigation result about pre-service teachers' understanding of radian. The results of this study are as follows. First, pre-service teachers understood the radian as ${\frac{180^{\circ}}{\pi}}$, rather than as the definition. Secondly, the definition style of radian affected the problem solving strategy for the measurement of the angle. Thirdly, pre-service teachers had insufficient content knowledge about properties of measurement as a pure number of radian. Lastly, They failed to describe the usefulness of circular measure. We suggested the definition of radian in textbooks should be changed from ${\frac{180^{\circ}}{\pi}}$ to mathematical definition of radian. And the general angle should be stated as the reason why the domain of trigonometric function is real numbers.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.91-108
• /
• 2007

This study was investigated both the Korean official soil test method and the international various methods for PCBs in soil sample. The analytical guideline of PCBs in contaminated soil were proposed based on the official soil test methods by discussing the extraction, column cleanup, instrumental conditions, quantification methods of peak matching and individual isomers. The total 28 soil samples were selected by consideration of PCBs-contamination, land use etc., and then analyzed using gas chromatography/electron capture detection (GC/ECD) and gas chromatography/mass spectrometry(GC/MS). In this study, the PCBs were not detected as peak matching method using GC/ECD, but PCBs detected $0.002{\sim}0.487{\mu}g/kg$ using GC/MS in background concentrations.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2011

This study investigates the physical properties and manufacturing method of shape memory fabric for emotional garment made by polypropylene. For this purpose, polypropylene(PP) POY and SDY were texturized using low temperature and constant length heat treatment texturing technologies, respectively. The shape memory fabrics made using these texturized PP yarns were woven with two kinds of PET and PTT shape memory yarns on the air-jet loom and the various physical properties of four kinds of shape memory fabrics were measured and discussed. The tenacity and breaking strain of PP texturized yarns treated by low temperature and constant length heat treatment showed high weaving efficiency and the wet thermal shrinkage of PP textured yarns was shown less than 1.5%, dry thermal shrinkage was ranged between 3% and 5%, which means thermal stability compared to the PTT textured yarn with high thermal shrinkage, 5~8%. The shape memory characteristics of PP shape memory fabrics measured by Toray method showed five grade as same value as PTT shape memory fabric. The heat keeping property of the PP shape memory fabric showed 56% higher value than that of PTT shape memory fabric. The water repellency of PP shape memory fabric measured by spray method showed five grade as same value as PTT shape memory fabric treated with water repellent agent. Especially, shape memory properties of PP shape memory fabric measured by 3-D image and camera measurement methods showed similar characteristics to the PTT shape memory fabric.