• Water Engineering Research
• /
• v.1 no.2
• /
• pp.129-136
• /
• 2000

Predicting water levels is a difficult task because a lot of uncertainties are included. Therefore the neural network which is appropriate to such a problem, is introduced. One day ahead forecasting of river stage in the Bocheong River is carried out by using the neural network model. Historical water levels at Snagye gauging point which is located at the downstream of the Bocheong River and average rainfall of the Bocheong River basin are selected as training data sets. With these data sets, the training process has been done by using back propagation algorithm. Then waters levels in 1997 and 1998 are predicted with the trained algorithm. To improve the accuracy, a filtering method is introduced as predicting scheme. It is shown that predicted results are in a good agreement with observed water levels and that a filtering method can overcome the lack of training patterns.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.61-70
• /
• 2012

Recently due to the increasing of the importance on the green energy is getting higher by implementing EERS(Energy Efficiency Resource Standards) and NA(Negotiated Agreement) such as lacks of natural resources and The United Nations Framework Convention on Climate Change. And the most practical solution is CHP(Combined Heat and Power) which performs the best energy efficiency. This paper developed optimal operation mechanism of CES(Community Energy System) for enhancement of energy efficiency using CHP(Combined Heat and Power), PLB(Peak Load Boiler) and ACC(ACCumulator) capacities. This method optimally operated these capacities calculated the maximum profits by Dynamic Programing. Through the case studies, it is verified that the proposed algorithm of can evaluate availability.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.345-352
• /
• 1994

Electronic products can be subjected to many different forms of shock. These shocks are usually experienced during transporting the electronic products from a manufacturer to customers. Drop tests are performed to test the product fragility before shipment. Package cushioning materials are often used to protect electronic products from severs shock environments. In the present paper, an algorithm to predict the shock responses of the main mechanical parts is developed by use of the shock analysis in which the modal parameters extracted from vibration test are used. These results are in good agreement with the results of drop test. By use of the shock response prediction algorithm developed herein, it is possible to predict the results of drop test at various drop directions and also to select the optimal package cushioning materials.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.691-693
• /
• 2005

The prototype of the radiometric calibration algorithm, including the correction of scan mirror's angle, has been developed for the stationary meteorological sensor, firstly in Korea. We use this system on GOES-12 to evaluate two coefficients, slope and intercept. The evaluated coefficients show good agreement with the NESDIS's results for the five-case data. The calculated coefficients have been applied to the conversion from the measured counts to the radiance and the converting methods according to the scanning are investigated to enhance the radiometric accuracy.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.282-291
• /
• 2014

This paper presents a detailed theoretical analysis and performance assessment of the capacitor voltage balancing strategies for staircase modulated modular multilevel converters (MMC) in terms of the algorithm structures, voltage balancing effect, and switching frequency. A constant-frequency redundancy selection (CFRS) method with minimal switching loss is proposed and the function realization of specific modules of the algorithm is given. This method is simple and efficient in both switching frequency and regulation capacity. Laboratory results show very good agreement with the theoretical analysis and numerical simulations.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1600-1604
• /
• 2017

A new Complex Image Method based on Genetic Algorithm (GA) is proposed to calculate the Green's functions of CPW (coplanar waveguide)-type microwave components and antennas. The closed-forms of the spectral-domain integrals are obtained by the GA, avoiding the conventional procedures of the tedious linear algebra and the sampling conditions sensitive to the complex-variable sampling paths adopted in the Prony's and GPOF methods. The proposed method is compared with the numerical Sommerfeld Integral, which results in good agreement.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.102-109
• /
• 2002

This paper proposes a new design algorithm to optimize the withdrawal weighted SAW ladder devices, Withdrawal weighting on SAW resonators gives enhanced bandwidth and transition band characteristics, so an optimization algorithm was developed for ladder type SAW filters. To illustrate the validity of the technique, this method was applied to the design of RF band CDMA TX SAW filters, and the design results were confirmed to show good agreement with experimental performance.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.129-133
• /
• 2007

In this paper, we present the development of an antenna specialized for the maritime collision avoidance system. This antenna is configured as the dielectric rod partially embedded in the metal cavity to reduce the overall size, simultaneously assuring the mechanical sturdiness against the challenging oceanic weather conditions. More importantly, the design has been carefully done to meet the requirements on the radiation pattern(with the slope < 5 dB/deg in the elevation(E-plane), circular in the azimuth) suitable to receiving the reflected signals from the other objects on the sea. To find the optimal design parameters, the genetic algorithm has been used to meet the goals of the desired return loss and pattern. This design methodology is validated by the good agreement between the calculation and measurement.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.293-299
• /
• 2001

Since the previous cut-and-try design algorithm require much cost and time, it has recently been concerned the automatic design technique using the CFD and optimum design algorithm. In this study, the Navier-Stokes equations is solved to consider the more detail viscous flow informations of cascade interaction and O-H multiblock grid system is generated to impose an accurate boundary condition. The cubic-spline interpolation is applied to handle a relative motion of a rotor to the stator. To validate present procedure, the time averaged aerodynamic loads are compared with experiment and good agreement obtained. Once the N-S equations have been solved, the computed aerodynamic loads may be used to computed the sensitivities of the aerodynamic objective function. The Modified Method of feasible Direction(MMFD) is usef to compute the

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.182-188
• /
• 2006

An artificial neural network model for the microwave characteristics of an InGaAs/InP hemt for 70 nm gate length has been developed. The small-signal microwave parameters have been evaluated to determine the transconductance and drain-conductance. We have further investigated the frequency characteristics of the device. The neural network training have been done using the three layer architecture using Levenberg-Marqaurdt Backpropagation algorithm. The results have been compared with the experimental data, which shows a close agreement and the validity of our proposed model.