• 제목/요약/키워드: Aggregate control

검색결과 361건 처리시간 0.028초

In vitro cytotoxicity of four calcium silicate-based endodontic cements on human monocytes, a colorimetric MTT assay

  • Khedmat, Sedigheh;Dehghan, Somayyeh;Hadjati, Jamshid;Masoumi, Farimah;Nekoofar, Mohammad Hossein;Dummer, Paul Michael Howell
    • Restorative Dentistry and Endodontics
    • /
    • 제39권3호
    • /
    • pp.149-154
    • /
    • 2014
  • Objectives: This study was performed to evaluate the cytotoxicity of four calcium silicate-based endodontic cements at different storage times after mixing. Materials and Methods: Capillary tubes were filled with Biodentine (Septodont), Calcium Enriched Mixture (CEM cement, BioniqueDent), Tech Biosealer Endo (Tech Biosealer) and ProRoot MTA (Dentsply Tulsa Dental). Empty tubes and tubes containing Dycal were used as negative and positive control groups respectively. Filled capillary tubes were kept in 0.2 mL microtubes and incubated at $37^{\circ}C$. Each material was divided into 3 groups for testing at intervals of 24 hr, 7 day and 28 day after mixing. Human monocytes were isolated from peripheral blood mononuclear cells and cocultered with 24 hr, 7 day and 28 day samples of different materials for 24 and 48 hr. Cell viability was evaluated using an MTT assay. Results: In all groups, the viability of monocytes significantly improved with increasing storage time regardless of the incubation time (p < 0.001). After 24 hr of incubation, there was no significant difference between the materials regarding monocyte viability. However, at 48 hr of incubation, ProRoot MTA and Biodentine were less cytotoxic than CEM cement and Biosealer (p < 0.01). Conclusions: Biodentine and ProRoot MTA had similar biocompatibility. Mixing ProRoot MTA with PBS in place of distilled water had no effect on its biocompatibility. Biosealer and CEM cement after 48 hr of incubation were significantly more cytotoxic to on monocyte cells compared to ProRoot MTA and Biodentine.

2000년대 국내 항공기 사고·준사고 발생유형 사례연구 (A case study on the Occurrence Category of aircraft accidents and serious incidents in Korea in the 2000's)

  • 최영재;안재형;유경인;박정권
    • 한국항공운항학회지
    • /
    • 제21권4호
    • /
    • pp.119-125
    • /
    • 2013
  • Since year 2001 to the present time, the aircraft accidents and serious incidents in our country have surpassed 150 occurrences. The Boeing has published the statistical summary of commercial jet airplane accidents annually for the past 10 years on the basis of the occurrence categories defined by the CICTT(CAST/ICAO Common Taxonomy Team), and the number of occurrences is in order of loss of control(LOC-I), controlled flight into terrain(CFIT) and runway excursion (RE). Like the NTSB and the EASA, when fatal and non-fatal accidents are aggregated, though fatality rate is low, abnormal runway contact(ARC), system/component failure(SCF-PP/NP), ground handling(RAMP) rank high in the CICTT occurrence categories. With the less occurrence frequency, it is difficult to statistically analyze the aircraft accidents in our country, thus customarily the accidents and the serious incidents on aggregate are consolidated, and the statistical analysis is performed. This study categorizes the accidents and serious incidents to the domestic transportation aircraft in the past 10 years according to the CICTT occurrence categories, that is compared with foreign practices, and the implications have been discussed. From years 2001 through 2010, the accidents to the domestic transportation aircraft occurred in order of system failure(SCF-NP), ARC and power plant failure(SCF-PP), and when the accidents and the serious incidents are consolidated and analyzed, it is verified that a distribution appears similar to the European accident occurrence categories defined from 300 accident occurrence data.

공극구조 및 하중조건에 따른 콘크리트의 초음파 속도 모델링 (Modeling on Ultrasonic Velocity in Concrete Considering Micro Pore Structure and Loading Conditions)

  • 김윤용;오광진;박기태;권성준
    • 한국콘텐츠학회논문지
    • /
    • 제15권3호
    • /
    • pp.415-426
    • /
    • 2015
  • 초음파 속도를 이용한 콘크리트의 건전성 및 강도평가는 오랫동안 사용되어 왔으며, 현장조사에서 필수적이다. 콘크리트 내부의 공극률은 내구성 및 강도를 평가할 수 있는 주요인자이며, 초음파 진행에 방해가 되므로 공극률 변화에 따라 초음파 속도변화가 발생한다. 본 연구에서는 기존의 공극률 모델을 이용하여 콘크리트 내부를 통과하는 초음파 속도 모델링을 수행하였으며 실험값과의 비교하였다. 또한 인장 및 압축 재하 시험과 동시에 초음파 속도를 측정하여 재하 하중비를 이용한 모델링을 수행하였다. 압축영역에서는 하중재하비 50% 수준까지 초음파 속도가 약간 증가하였으며, 최대하중에 근접할수록 급격한 속도의 감소가 발생하였다. 인장영역에서는 압축영역과 다르게 초기부터 초음파 속도가 상당히 변화하였다. 제안된 기법은 콘크리트의 건전부 및 압축영역에서는 합리적인 결과를 보이고 있으며 인장영역에서는 미세균열 및 국소적인 골재치합을 고려한 보완이 필요할 것으로 판단된다.

지리정보체계를 이용한 도시 비점원오염의 대축척 모형화 (Modeling Large Scale of Urban Nonpoint Source Pollution using a Geographic Information System)

  • 김규현
    • 대한공간정보학회지
    • /
    • 제1권1호
    • /
    • pp.171-180
    • /
    • 1993
  • 도시하수와 관련된 비점원 오염에 대한 관심은 더 나은 수질계획을 위한 새로운 도구의 발전을 이끌어 왔다. 이 논문은 도시의 수질연구를 위해 지리정보체계가 어떻게 응용되는지를 보여준다. 지리정보체계는 비점원 오염 모형화를 위한 토지이용자료를 관리하기 위해 이용되고, 또한 여러 가지 형태의 지리적 집합체내에서 오염물질을 평가하는데 이용된다. 경험적인 수질모형은 토지이용에 근본을 둔 오염물질 축적을 평가하기 위해 이용된다. 토지이용범위는 최근 사진의 판독을 통해서 구범위를 갱신함으로써 결정된다. 이러한 토지이용범위는 각각의 토지이용 다각형에 대한 오염물질 축적을 기록하는데 이용된다. 도시하수 유역과 소하수 유역의 범위를 결정하기 위해 하수지도를 수치화 시키고 해석한다. 하수구 소유역층에서 오염물질 축적을 중첩시킴으로써 주요하수의 출구에 대한 오염 축적물이 계산된다. 축적 정보를 기본으로 과다 오염 축적물의 임계지역이 어디에 위치하고 있으며, 오염 축적물을 통제하기 위한 최선의 관리기법의 효율성이 평가된다.

  • PDF

액상 비염화물계 제설제의 강재 부식성 및 콘크리트 동결융해 내구성 평가 (Evaluation of steel corrosion and Concrete Freeze-Thaw durability on the Liquid non-chloride deicer)

  • 이병덕;김현중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.529-532
    • /
    • 2008
  • 우리나라에 제설제 피해가 발생하는 곳은 일평균기온이 0$^{\circ}C$이하로 되는 경우이므로 국내에서는 거의 모든 지역이 해당될 수 있다. 따라서, 다소 정도의 차이는 있으나 전국적으로 대부분의 강재 및 콘크리트 구조물이 동결융해 및 염해의 피해를 받고 있다고 볼 수 있다. 현재 주로 사용되고 있는 제설제는 염화물계인 염화칼슘과 소금이나, 이러한 염화물계 제설제를 많이 사용하게 됨에 따라 콘크리트 구조물의 조기 손상 및 환경피해로 인한 유지관리 비용이 크게 증가하고 있다. 따라서, 염화물계 제설제가 대량 살포되고 동결융해에 의한 동해를 받는 적설한랭지에서의 콘크리트 구조물 및 환경에 미치는 심각한 악영향에 대한 대책 방안을 강구하여야 하는 실정이다. 위와같은 취지로서 본 연구에서는 염화물계 제설제의 대체제로 친환경적인 비염화물계 제설제의 적용방안을 검토하기 위하여 강재의 부식 및 콘크리트의 동결융해에 미치는 영향을 평가하고자 비염화물계 제설제와 일반 제설제와의 pH 및 유해물질 함유량을 비교하였고 강재부식성 시험 및 동결융해 저항성 시험을 실시하여 그 성능을 평가하였다.

  • PDF

A Study on the Optimum Mix Proportion of the Mass Concrete Designed as Massive and Deep Structure

  • Kwon Yeong-Ho;Lee Hwa-Jin
    • 콘크리트학회논문집
    • /
    • 제17권2호
    • /
    • pp.293-302
    • /
    • 2005
  • This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

고강도 콘크리트의 탄성계수에 미치는 배합재료의 영향평가 (Effect of Mix Ingredients on Modulus of Elasticity of High-Strength Concrete)

  • 장일영;박훈규;이승훈;김규동
    • 콘크리트학회논문집
    • /
    • 제14권1호
    • /
    • pp.67-75
    • /
    • 2002
  • 콘크리트 구조물의 설계 덴 해석에 있어서나 구조물 처짐 제어에 있어서 가장 중요한 재료적 변수는 탄성계수이다. 일반적으로 탄성계수는 실용적 측면에서 측정이 용이한 단위중량과 압축강도만의 함수로써 간략하게 정의되고 있다. 그러나 이러한 회귀식들은 대부분 실험자료에 대한 평균적인 의미이므로 매우 많은 불확실성이 포함되어 있어 지금까지 제시된 많은 규준식 및 실험식들이 다소의 차이가 있다. Fig. 1에서와 같이 이러한 식들은 압축강도와 탄성계수사이의 큰 상관성이 있음을 잘 나타내고 있으나, 동일한 압축강도에서 탄성계수는 크게 분산된 값으로 측정됨을 알 수 있다. 본 연구에서는 고강도 콘크리트 영역에서 탄성계수에 미치는 배합변수들의 영향을 통계적 기법을 이용하여 분석하고 이를 통하여 동일한 압축강도에서 최대의 탄성계수를 얼기 위한 방안을 구명하였다.

Studies on Microbial Extracellular $\beta$-Gala-ctosidase

  • Lee, Keun-Eok
    • 한국미생물생명공학회:학술대회논문집
    • /
    • 한국미생물생명공학회 1979년도 춘계학술대회
    • /
    • pp.113.2-114
    • /
    • 1979
  • $\beta-Galactosidase$ is an enzyme which catalizes hydrolysis of lactose, a natural substrate, to glucose and galctose and transferring some monosac-charide units to active acceptors as sugar or alcohol. The occurence of $\beta-Galactosidase$ is known in various microorganisms, animals and higher plants and has been studied by many investigatigators. Especially, a great deal of articles for the enzyme of E. coli have been presented in genetic control mechanism and induction-repression effects of proteins, On the other hand, in the dairly products industry, it is important to hydrolyes lactosd which is the principal sugar of milk and milk products. During the last few years, the interest in enzymatic hydrolysis of milk lactose has teen increased, because of the lactose intolerence in large groups of the population. Microbial $\beta-Galactosidases$ are considered potentially most suitable for processing milk to hydrolyse lactose and, in recent years, the immobilized enzyme from yeast has been examined. Howev, most of the microbial $\beta-Gal$ actosidase are intracellular enzymes, except a few fungal $\beta-Gala-$ ctosidases, and extracellular $\beta-Galactosidase$ which may be favorable to industrial applieation is not so well investigated. On this studies, a mold producing a potent extracellular $\beta-Galactosidase$ was isolated from soil and identified as an imperfect fungus, Beauveria bassians. In this strain, both extracellular and intracellular $\beta-Galactosidases$ were produced simultaneously and a great increase of the extracellular production was acheved by improving the cultural conditions. The extracellular enzyme was purified more than 1, 000 times by procedures including Phosphocellulose and Sephadex G-200 chromatographies. Several characteristics of the enzymewas clarified with this preparation. The enzyme has a main subunit of molecular weight of 80, 000 which makes an active aggregate. And at neutral pH range, it has optimum pH for activity and stability. The Km value was determined to be 0.45$\times$10$^{-3}$ M for $o-Nitrophenyl-\beta-Galactoside.$ In any event, it is interesting to sttudy the $\beta-Galactosidase$ of B. bassiana for the mechanism of secretion and conformational structure of enzyme.

  • PDF

A Stochastic Bilevel Scheduling Model for the Determination of the Load Shifting and Curtailment in Demand Response Programs

  • Rad, Ali Shayegan;Zangeneh, Ali
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권3호
    • /
    • pp.1069-1078
    • /
    • 2018
  • Demand response (DR) programs give opportunity to consumers to manage their electricity bills. Besides, distribution system operator (DSO) is interested in using DR programs to obtain technical and economic benefits for distribution network. Since small consumers have difficulties to individually take part in the electricity market, an entity named demand response provider (DRP) has been recently defined to aggregate the DR of small consumers. However, implementing DR programs face challenges to fairly allocate benefits and payments between DRP and DSO. This paper presents a procedure for modeling the interaction between DRP and DSO based on a bilevel programming model. Both DSO and DRP behave from their own viewpoint with different objective functions. On the one hand, DRP bids the potential of DR programs, which are load shifting and load curtailment, to maximize its expected profit and on the other hand, DSO purchases electric power from either the electricity market or DRP to supply its consumers by minimizing its overall cost. In the proposed bilevel programming approach, the upper level problem represents the DRP decisions, while the lower level problem represents the DSO behavior. The obtained bilevel programming problem (BPP) is converted into a single level optimizing problem using its Karush-Kuhn-Tucker (KKT) optimality conditions. Furthermore, point estimate method (PEM) is employed to model the uncertainties of the power demands and the electricity market prices. The efficiency of the presented model is verified through the case studies and analysis of the obtained results.

골 재흡수 치료를 위한 파미드로네이트를 함유한 이식형 생분해성 PLGA 웨이퍼의 제조와 특성결정 (Preparation and Characterization of Pamidronate-loaded PLGA Wafer for the Treatment of Bone Resorption)

  • 유제영;김상욱;강길선;성하수;정제교
    • 폴리머
    • /
    • 제26권5호
    • /
    • pp.680-690
    • /
    • 2002
  • 골 재흡수 치료를 목적으로 파미드로네이트를 지속적으로 방출하는 제형으로 제조하기 위하여 락타이드-글리콜라이드 공중합체 (PLGA, 락타이드 : 글리콜라이드 몰비 = 75 : 25, 분자량 20000 g/mole 및 90000 g/mole)를 이용하여 직접압축 성형방법으로 생분해성 웨이퍼를 제조하였다. 약물과 고분자의 함량비 웨이퍼의 두께, PLGA 분자량 등을 조절하여 PLGA 웨이퍼를 제조하였고 이들의 형태학적 특성과 방출거동 및 분해거동을 살펴보았다. 웨이퍼의 제조는 혼합된 분말을 웨이퍼 제작용 몰드에 넣은 후 프레스를 이용하여 일정 압력으로 일정시간 동안 상온에서 가압하여 제조하였다. 제조된 웨이퍼는 약물의 초기함량이 증가할수록 방출속도가 빠르게 나타났으며, 제형의 두께가 두꺼워질수록 시간이 경과함에 따라 약물의 방출속도가 증가하였다. 또한 고분자의 분자량이 큰 것이 작은 것에 비해 상대적으로 초기 약물 방출량이 적고 방출되는 속도 또한 느려져. 저분자보다 오랫동안 약물이 방출되었다. 이러한 약물전달 시스템은 압축성형방법에 의해 제조하므로 제조가 간단하고 약물방출속도를 정확하게 제어할 수 있으므로 이식을 위한 제형으로 제조시 유용하게 쓰일 것으로 예상되었다.