• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.244-250
• /
• 2000

An ${\alpha}-glucosidase$ gene (aglA) from thermophilic Bacillus sp. DG0303 was cloned, sequenced, and expressed in Escherichia coli. The aglA was localized to the 2.1-kb PvuI-XmnI region within the 5.9-kb DNA insert of the gybrid plasmid pAG1. The gene consisted of an open reading frame of 1,686 bp with an unusual GTG initiation codon and TGA termination codon. The amino acid sequence deduced from the nucleotide sequence predicted a protein of 562 amino acid residues with a M, of 66,551 dalton. A comparative amino acid sequence analysis revealed that DG0303 ${\alpha}-glucosidase$ is related to bacillary oligo-1, 6-glucosidases. The Bacillus sp. DG0303 ${\alpha}-glucosidase$ showed a high sequence identity (36-59%) to the B. flavocaldarius, B. cereus, and B. thermoglucosidasius oligo-1, 6-glucosidases. The number of prolines in theses four ${\alpha}-glucosidases. was observed to increase with increasing thermostability of these enzymes. The cloned ${\alpha}-glucosidase was purified from E. coli $DH5{\alpha}$ bearing pAG1 and characterized. The recombinant enzyme was identical with the native enzyme in its optimum pH and in its molecular mass, estimated by sodium dodecy1 sulfate-polyacrylamide gel electrophoresis. The temperature optimum of the cloned ${\alpha}-glucosidase$ was lower than that of the native enzyme.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.200-205
• /
• 1990

Chemically modified electrodes(CMEs), based on 2-imino-1-cyclopentane-dithiocarboxylic acid (icdc) containing carbon paste, have been characterized using cyclic voltammetric techniques. Ag(I) was chemically deposited on the CMEs, and voltammograms were obtained with the electrode in a separate buffer solution. The CME surface can be regenerated with exposure to acid and reused for deposition. In 10 deposition/measurement/regenerate cycles, the linear response have been reproduced up to $1{\times}10^{-6}$ M in linear sweep voltammetry and 1${\times}$10-8 M in differential pulse voltammetry with relative standard deviation of 5.2% and 12.4%, respectiveiy. The sensitivity increased with deposition time and scanning rate, and detection limit was $1{\times}10^{-7}M\;and\;1{\times}10^{-9}M$ at 20 minutes deposition in the linear sweep voltammetry and differential pulse voltammetry, respectively. The presence of some metal ions does not influence the silver ion response. Satisfactory results were obtained for the analysis of the silver ion for a variety of reference materials without interference of Hg ion at the condition of pH = 5-6.

• Conservation Science in Museum
• /
• v.4
• /
• pp.79-88
• /
• 2003

The lacquer ware objects of Nangnang were treated for conservation and seven of them were studied on the manufacturing technic. When we examined them using microscopes and an SEM-EDS analysis, the lacquer layer was proved to consist of two parts: the ground and the upper lacquer. The ground coating was made of several mixed materials such as powdered bone and minerals. Many forms of powdered bone were observed. We could find out that HgS, PbO and AgS were used as pigments. We could also find out a specific process and materials were used for those objects, although we could not say definitely what they were because the number of the sample was not big enough.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.81-86
• /
• 2000

To evaluate the possibility of the partial melting soldering. wettability of partial melted solders was measured using wetting balance. Off eutectic Sn-Pb allows are wettable in their partial melting zone. Especially, Pb rich alloys showed excellent wettability while wettability of Sn rich alloys were adequate or poor. It is found that wettability increases over $200^{\circ}C$ regardless of composition liquid fraction and phases of the original alloy Sn-7Ag alloy showed good wettability in their partial melting zone, while Sn-65Bi alloy was non-wettable under their melting points.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.95-104
• /
• 2013

This study developed three indices for evaluating regional brand value, i.e. awareness index, experience index, and attractiveness index. We used an AHP approach to estimate these indices for 151 rural regions (151 administrative jurisdictions in Korea). Our estimation results show that regional brand index varies considerably across regions by the individual characteristics of interviewee. First, the value of regional brand of local jurisdiction is higher than that of more integrated administrative jurisdiction. Second, the brand value of Gangwon and Jeolla region is higher than that of other regions. Third, the interviewees with school children in the age of 40-50 are likely to have higher regional brand value. The estimation results also show a need for different strategies to develop and improve regional brand.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.280-290
• /
• 1999

The microstructures of a Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.6}Ca_2Cu_3O_{9+{\delta}}$/Ag tape (tape I ) with J$_c$ of 17,600 A/cm$^2$ at 77 K and 0 T and three Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.8}Ba_{0.2}Ca_{2.2}Cu_3O_{9+{\delta}}$/Ag tapes with J$_c$'s of 9,300 (tape II), 16,700 (tape III) and 25,200 A/cm$^2$ (tape IV)prepared using the powder-in-tube method and an in-situ reaction method, were investigated using scanning electron microscopy and high-resolution transmission electron microscopy, and compared each other. ln the tape preparation, an intermediate rolling process was incorporated during final heat-treatment for the last tape, but not for the rest of the tapes. The microstructural analysis revealed clear differences in grain-texturing, crystallographic defects and impurity phases, depending on the chemical composition of the tape. Tendency of directional grain-alignment increased in an order of tapes I, II III and IV. In tape IV, T1-1223 grains are textured, at least in local regions. In crystallographic defects, while stacking faults were prevalent in the former composition, dislocations and voids were frequently observed in the latter. Also impurity phases were appeared to be more abundant in the former than in the latter. The relationship between 1,and the microstructure in the tapes was attempted to explain in a term of grain-linking.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.601-608
• /
• 2020

In this work, Ag₃PO₄/In₂S₃ nanocomposites with low loading of In₂S₃ (5-15 wt %) are fabricated by two step chemical precipitation approach. The microstructure, composition and improved photoelectrochemical properties of the as-prepared composites are studied by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photocurrent density, EIS and amperometric i-t curve analysis. It is found that most of In₂S₃ nanoparticles are deposited on the surfaces of Ag₃PO₄. The as-prepared Ag₃PO₄/In₂S₃ composite (10 wt%) is selected and investigated by SEM and TEM, which exhibits special morphology consisting of lager size substrate (Ag₃PO₄), particles and some nanosheets (In₂S₃). The introduction of In₂S₃ is effective at improving the charge separation and transfer efficiency of Ag₃PO₄/In₂S₃, resulting in an enhancement of photoelectric behavior. The origin of the enhanced photoelectrochemical activity of the In₂S₃-modified Ag₃PO₄ may be due to the improved charge separation, photocurrent stability and oriented electrons transport pathways in environment and energy applications.

• Microbiology and Biotechnology Letters
• /
• v.46 no.2
• /
• pp.120-126
• /
• 2018

As a basic study for environment-friendly production of bacterial cellulose (BC) dressing with antimicrobial activity, we isolated and identified acetic acid bacteria which are resistant to silver ions and can biosynthesize silver nanoparticles. Furthermore, conditions of BC production by selected strain were also investigated. Strain G7 isolated from decayed grape skin was able to grow in the presence of 0.1 mM $AgNO_3$ which was identified as Acetobacter intermedius based on 16S rRNA gene analysis. BC production was the highest in a medium containing 2% glucose as a carbon source, 2% yeast extract as a nitrogen source, and 0.115% acetic acid as a cosubstrate. Structural properties of BC produced in optimal medium were studied using Fourier-transform infrared spectroscopy and X-ray diffractometer, and it was found that BC produced was cellulose type I that was the same as a typical native cellulose. When strain G7 was cultured in an optimal medium containing 0.1 mM $AgNO_3$, the color of the culture broth turned into reddish brown, indicating that silver nanoparticles were formed. As a result of UV-Vis spectral analysis of the culture, it was found that a unique absorption spectrum of silver nanoparticles at 425 nm was also observed. Scanning electron microscopic observations showed that silver nanoparticles were formed on the surface and pores of BC membrane.

• Preventive Nutrition and Food Science
• /
• v.10 no.3
• /
• pp.279-284
• /
• 2005

Uncoupling protein-1 (UCP-1) plays a major role in thermogenesis, and has been implicated in the pathogenesis of obesity and metabolic disorders. The aim of this study was to estimate the effects of A-3826G polymorphism of UCP-1 gene on body fat distribution. Two hundred forty eight Korean female overweight subjects with BMI more than 25 kgfm2 participated in this study. The areas of abdominal subcutaneous and visceral fat of all subjects were measured from computed tomography cross sectional pictures of the umbilical region. Subcutaneous fat areas of upper and lower thigh were also measured. Body composition was measured by bio-impedance analysis, and serum concentrations of biochemical parameters, such as glucose, triglyceride, cholesterol etc, were also measured. Genotype of UCP-1 was analyzed by polymerase chain reaction (PCR) restriction fragment length polymorphism (RFLP) method. The frequencies of UCP-1 genotypes were AA type; $27.8\%,\;AG\;type;\;51.2\%\;and\;GG\;type;\;21.0\%,$ and the frequency of G allele was 0.47. Body weight, BMI, WHR, SBP, DBP and body compositions were not significantly different by UCP-1 genotype. Abdominal visceral fat area was significantly higher in AG and GG type compared with AA type (p=0.009), but subcutaneous fat areas were not significantly different by UCP-1 genotype. Among biochemical parameters, LDL cholesterol level was significantly higher in GG type compared with AA and AG types (p=0.033). Among all subjects, 121 subjects finished 1 month weight loss program containing hypocaloric diet and exercise. The reduction of body weight and BMI were lower in GG type compared with AA/AG type even though statistical significances were not found (p > 0.05). These results suggest that UCP-1 genotype has a significant effect on visceral fat accumulation among Korean female overweight subjects with BMI more than $25\;kg/m^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.79-81
• /
• 1996

We fabricated SrTiO$_3$thin film capacitor on the Ag/Si-wafer by RF sputtering deposition. And I-V characteristics and structual analysis of the thin film capacitor are investigated. We found that the leakage current of the films during deposition is strongly denpent on the ambient gas and substrate temperature. Because of increase of activation energy, leakage current increased at high temperature and resistivity of the films was decreased. According to the increase of oxygen gas flow rate, the conductivity of thin film capacitor was increased and leakage current was decreased.