• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.5
• /
• pp.453-460
• /
• 2018

The impact of sodium hydroxide, which is one of chemicals of clean in place (CIP) for removing membrane fouling, on the PVDF membrane is reviewed with respect to physical/chemical structural change, the permeability affected therefrom. Based on the cleaning concentration applied in membrane water treatment facilities, 10% of accumulated defluorination was confirmed up to 166g.hr/L which reflects the exposure time. However, membrane resistance was confirmed to be reduced by about 10%. Through FT-IR and EDS analysis, reduction of F and change of are confirmed as factors that affect the permeability of membrane. Membrane resistance, which affects permeability, is affected by loss of additives for hydrophilicity, rather than defluorination of PVDF material. Therefore, in order to check membrane degradation degree, an accelerated test by NaOH was carried out, loss of additives was confirmed, and then PVDF inherent characteristic was observed.

• Phonetics and Speech Sciences
• /
• v.9 no.3
• /
• pp.67-74
• /
• 2017

An increase in speech intelligibility has been found in Clear Speech compared to conversational speech. Clear Speech is defined by decreased articulation rates and increased frequency and length of pauses. The objective of the present study was to investigate improvement in immediate speech intelligibility in 10 patients with Parkinson's disease (age range: 46 to 75 years) using Clear Speech. This experiment has been performed using the Phonatory Aerodynamic System 6600 after the participants read the first sentence of a Sanchaek passage and the "List for Adults 1" in the Sentence Recognition Test (SRT) using casual speech and Clear Speech. Acoustic and aerodynamic parameters that affect speech intelligibility were measured, including mean F0, F0 range, intensity, speaking rate, mean airflow rate, and respiratory rate. In the Sanchaek passage, use of Clear Speech resulted in significant differences in mean F0, F0 range, speaking rate, and respiratory rate, compared with the use of casual speech. In the SRT list, significant differences were seen in mean F0, F0 range, and speaking rate. Based on these findings, it is claimed that speech intelligibility can be affected by adjusting breathing and tone in Clear Speech. Future studies should identify the benefits of Clear Speech through auditory-perceptual studies and evaluate programs that use Clear Speech to increase intelligibility.

• BMB Reports
• /
• v.29 no.4
• /
• pp.300-307
• /
• 1996

ATP and ADP are potential regulators of mitochondtial respiration and at physiological concentrations they affect the rate of electron transfer between cytochrome c and cytochrome c oxidase. The electron transfer, however, depends on the electrostatic interaction between the two proteins. In order to exclude any nonspecific ionic effects by these polyvalent nucleotides, we used 2'-O-(2,4,6)trinitro(TNP)-derivatives of ATP and ADP which have three orders of magnitude higher affinity for cytochrome c oxidase. A simple titration of the fluorescence intensity of TNP by cytochrome c oxidase showed a binding stoichiometry of 2:1 cytochrome c:cytochrome c oxidase. Higher ionic strength was required for TNP-ATP than for TNP-ADP to be dissociated from cytochrome c oxidase, indicating that the negative charges on the phosphate group are at least partially responsible for the binding. In both spectrophotometric and polarographic assays, addition of ATP (and ADP to a less extent) showed an enhanced cytochrome c oxidase activity. Both electron paramagnetic resonance and fluorescence spectra indicate that there is no Significant change in the cytochrome c-cytochrome c oxidase interaction. Instead, reduction levels of the cytochromes at steadystate suggest that the increased activity of nucleotide-bound cytochrome c oxidase is due to faster electron transfer from cytochrome ${\alpha}$ to cytochrome ${\alpha}_3$, which is known to be the fate limiting step in the oxygen reduction by cytochrome c oxidase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.12
• /
• pp.1635-1646
• /
• 1997

The nozzle length to diameter ratio of real diesel nozzles is about 2-8 which is not long enough for a fully developed and stabilized flow. The characteristics of the flow such as turbulence at the nozzle exit which affect the development of the spray can be enhanced by impinging the flow inside nozzle. The flow details inside the impinging nozzles have been investigated both experimentally and numerically. The mean velocities, the fluctuating velocities, and discharge coefficients in the impinging inlet nozzles, round inlet nozzle, and sharp inlet nozzle were obtained at various Reynolds number. The developing feature of the external spray were photographed by still camera and the droplet sizes and velocities were also measured by laser Doppler technique. The spray angle was greater and the droplet sizes near the spray axis were smaller with the impinging flow inside nozzle.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1045-1050
• /
• 2003

In this study, to investigate the effects of omitting low-amplitude cycles from a flight-simulation loading, crack growth tests are conducted on 2124-T851 aluminum alloy specimens. Three test spectra are generated by omitting small load ranges as counted by the rain-flow count method. The crack growth test results are compared with the data obtained from the flight-simulation loading. The experimental results show that omission of the load ranges below 5% of the maximum load does not significantly affect crack growth behavior, because these are below the initial stress intensity factor range. However, in the case of omitting the load ranges below 15% of the maximum load, crack growth rates decrease, and therefore crack growth curve deviates from the crack growth data under the flight-simulation loading. To optimize the load range that can be omitted, crack growth curves are simulated by the stochastic crack growth model. The prediction shows that the omission level can be extended to 8% of the maximum load and test time can be reduced by 59%.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.241-249
• /
• 2020

The role of money in the modern economy highly determines the intensity and the development of the macroeconomy. The money supply is assumed to be as much as money demand, which reflects the economic character of a country and indicates the growth and development of macroeconomy. In Indonesia, the money supply (M1) is related to the economic dynamics in either the monetary market or the goods market. This research aims at analyzing factors that influence the money supply and to what extent the economic factors affect the money supply in Indonesia. The analysis method used in this research was Vector Autoregressive (VAR) with some variables, such as money supply (M1), interest rate, and Gross Domestic Product (GDP) from the 1st quarter of 2001 until the 1st quarter of 2013. The data collection method was in the form of data compilation from credible sources, such as Bank of Indonesia (BI), Central Bureau of Statistics (CBS), and International Financial Statistics (IFS). To obtain adequate analysis results, several tests were taken, such as unit-root test, Granger causality test, and optimal lag. VAR analysis formulates the correlation among independent variables, so it also sees the study of impulse response and matrix decomposition.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.4 s.29
• /
• pp.133-133
• /
• 1996

Application of the relationship $da/dN=C({\Delta}K)^{m}$ is effective in the analysis of fatigue crack growth life. The values of material constant C and m have great influences on the predicted fatigue life and the relationship between fatigue crack growth rate(da/dN) and stress intensity factor range(${\Delta}K$) is effective in fatigue crack growth behavior. In this paper, fatigue crack growth behavior of the welded joints in HT60 grade TMCP(Thermo Machanical Control Process) steel have been studied. To evalute the fatigue crack growth rates of HT60 grade TMCP steel, fatigue test was performed by base metal(BM), heat affected zone(HAZ) and weld metal(WM) in TMCP steel at room temperature. We determined the relationship of $da/dN-{\Delta}K$ by correlation between C and m obtained from the Paris-Erdogan power law data supplied HT60 grade TMCP steel. The obtained results from this study indicate that fatigue crack growth rate of TMCP steel is not influenced by softening effect which occurs in the HAZ when high heat input weld is carried out. Softening effects, which affect fatigue properties. are shown that it is not affected to the fatigue growth rates significantly.

• Journal of Photoscience
• /
• v.5 no.2
• /
• pp.53-61
• /
• 1998

Using a squash plant, a chilling-sensitive species, and a spinach plant, a chilling-resistant one, effects of chilling temperature on the photosynthetic machinery were studied in terms of chlorophyll fluorescence. When thylakoid membranes were isolated and subjected to incubation at different temperatures, spinach showed stable photosystem II activity at the low temperature side, in contrast to squash which showed quite severe inactivation at low temperature. When parameters of chlorophyll fluorescence were examined, chilling in darkness did not affect either Fv/Fm or photochemical and non-photochemical quenching, in both types of plants. However, chilling of squash plants under irradiance of medium intensity caused a specific decrease in Fv/Fm accompanied by a decline in energy-dependent quenching. Contrastingly, photosystem li of spinach plants were not much affected by light-chilling. When the pool size of zeaxanthin was examined after exposure to high light at different temperatures, squash plants was shown to have a much lower content of antheraxanthin + zeaxanthin, as compared to spinach plants, during low-temperature photoinhibition. These results suggest that chilling-sensitive plants have low capacity to dissipate excitation energy nonradiatively, when they are exposed to low-temperature photoinhibition, and, as a consequence, more vulnerable to photoinhibitory, damage to the photosynthetic apparatus.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2017

PURPOSE: Central post-stroke pain (CPSP), a chronic pain condition of stroke patients, can impair activities of daily living and worsen the quality of life (QOL), thereby negatively influencing the rehabilitation process. However, CPSP remains an underestimated complication of stroke. This study aimed to describe the prevalence and types of new-onset chronic pain and to identify the relation between pain and QOL in stroke patients. METHODS: All patients hospitalized because of a diagnosis of stroke were included. Questionnaire was used. Pain intensity was measured using Numerical rating scale (NRS), and pain characteristics were assessed using DN4. QOL was measured using SF-36. Descriptive statistics were used to analyze the characteristics and pain data, and chi-square test was used to compare QOL categorical data between the nociceptive and neurological pain groups. RESULTS: CPSP development was reported by 34% of the post-stroke pain patients. Perceived QOL was low in both groups, especially with respect to the physical functioning, bodily pain, physical-role functioning, emotional-role functioning, and mental health domains. However, no significant difference was observed in QOL between the nociceptive and neurological pain groups (p<.05). CONCLUSION: Our results indicated that CPSP is a common and disabling complication that is difficult to treat, often decreases QOL, and may negatively affect rehabilitation treatment.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.2
• /
• pp.548-553
• /
• 2007

In general, cancer pain is neither fully recognized nor adequately treated. The inadequate pain control is due to failure of accurate assessment of cancer pain. This study was aimed to understand various characters of cancer pain and investigate available assessment scales which have been designed for, or frequently used with people with cancer pain. A total of 23 articles were selected from two different databases. The selected articles were analyzed according to three aspects of initial assessment, patient self-report and assessment of the outcomes of pain management. The characters of cancer pain is complex and includes physical, psychosocial, and spiritual dimension. Also, subjective pain can be classified into at least four specific factors, such as pain intensity, pain affect, pain relief, and pain quality. Based on various classification, the pain assessment scales can be divided into unidimensional or multidimensional. Among the more commonly used clinical tools are numeric rating scales, verbal rating scales, visual analog scales, and picture scales. Above all, in order to assess cancer pain objectively, the clinician must select appropriate assessment instruments which reflect pain definition and clinical purpose.