• 한국입자에어로졸학회지
• /
• 제15권4호
• /
• pp.149-157
• /
• 2019

Infiltration characteristics of airborne particulate matter had been investigated in real-life for about 90 days over 2 years in a Korean apartment building where a 3-person household had lived and the exclusive private area was 84.9 ㎡. Airtightness was measured by fan depressurization, and the ACH₅₀ was 2.41 times per hour. In and outdoor particle concentrations were measured by optical particle counters. Infiltration factors and filtration efficiencies of the house, which reflect the removal of outdoor particles penetrating building envelope and the deposition inside a building, were obtained from data screened based on an empirical evaluation process. Infiltration factor of fine particles showed a range from about 42% at 0.4 m/s of wind speed to 72% at 4.2 m/s of wind speed with closed windows and doors. Filtration efficiency was like a MERV 13 grade filter with an open window outside at a balcony at low outdoor wind speed under 1 m/s. The grade decreased to MERV 11 by opening another outside window at the other balcony. Filtration efficiencies decreased as much as 29% in average at a range of 0.3~2.5 ㎛.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.73-78
• /
• 2019

Lead free $(Ba_{0.7}Ca_{0.3})TiO_3$ thick films with nano-sized grains are prepared using an aerosol deposition (AD) method at room temperature. The crystallinity of the AD thick films is enhanced by a post annealing process. Contrary to the sharp phase transition of bulk ceramics that has been reported, AD films show broad phase transition behaviors due to the nano-sized grains. The polarization-electric hysteresis loop of annealed AD film shows ferroelectric behaviors. With an increase in annealing temperature, the saturation polarization increases because of an increase in crystallinity. However, the remnant polarization and cohesive field are not affected by the annealing temperature. BCT AD thick films annealed at $700^{\circ}C/2h$ have an energy density of $1.84J/cm^3$ and a charge-discharge efficiency of 69.9 %, which is much higher than those of bulk ceramic with the same composition. The higher energy storage properties are likely due to the increase in the breakdown field from a large number of grain boundaries of nano-sized grains.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.58.2-58.2
• /
• 2010

This paper deals with the simulation of solid particle coating technology via supersonic nozzle in vacuum environment to devote as an aerosol-deposition device. In order to improve efficiencies of nozzle and coating process, effects of shockwave, nozzle geometry, and substrate location were studied computationally under a fixed chamber pressure of 0.01316 bar which is nearly vacuous. Shockwave is the important factor affect to entire flow because shockwave in the jet flow dissipates the kinetic energy of the flow in the supersonic condition. Results show that various nozzle geometries have significant effect on the supersonic flow and we know that the supersonic nozzle should be optimized to minimize the loss of the flow. Another parameter, the distance between substrate and nozzle tip, shows little effect in this study.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E3호
• /
• pp.87-94
• /
• 2005

Wet scavenging by rain drops is a most important removal process of air pollutants. In order to study the scavenging mechanisms of aerosol particles, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. Rain water were collected continuously and separated into the soluble and insoluble components. The elemental concentrations in both components were determined by a PIXE analysis. The physical and chemical characteristics of atmospheric aerosols during the rainfall events were measured simultaneously. The elemental concentrations in rain water decreased substantially just after rain started and then gradually declined in subsequential rain fall exceeding 1.0 mm. The large particles were scavenged more easily than the fine particles. Fe, Ti and Si in rain water were in high insoluble state. Contrarily, almost whole of S was dissolved in rain water.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.546-551
• /
• 2021

To improve ferroelectric properties of PZT, many studies have attempted to fabricate dense PZT films. The AD process has an advantage for forming dense ceramic films at room temperature without any additional heat treatment in low vacuum. Thick films coated by AD have a higher dielectric breakdown strength due to their higher density than those coated using conventional methods. To improve the breakdown strength, glass (SiO₂-Al₂O₃-Y₂O₃, SAY) is mixed with PZT powder at various volume ratios (PZT-xSAY, x = 0, 5, 10 vol%) and coating films are produced on silicon wafers by AD method. Depending on the ratio of PZT to glass, dielectric breakdown strength and energy storage efficiency characteristics change. Mechanical impact in the AD process makes the SAY glass more viscous and fills the film densely. Compared to pure PZT film, PZT-SAY film shows an 87.5 % increase in breakdown strength and a 35.3 % increase in energy storage efficiency.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.71-74
• /
• 2006

High $J_c$ over 1 $MA/cm^2$ YBCO film has been successfully prepared using nitrate precursors by spray pyrolysis method. Aerosol drolpets generated using a concentric spray nozzle were directly sprayed on a $LaAlO_3$(100) single crystal substrate. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:1.35. The distance between nozzle and substrate was 15 cm. Deposition temperature was ranging from $750^{\circ}C\;to\;800^{\circ}C$. Deposition pressure was 100 Torr, and oxygen partial pressure was varied from 10 Torr to 50 Torr. The microstructure, phase formation, texture development and superconducting properties of deposited films were largely changed with oxygen partial pressure. Deposited films showed a texture with(001) planes parallel to substrate plane. High quality film was obtained when film was deposited at $760^{\circ}C$ with an oxygen partial pressure of 30 Torr. The critical current density($J_c$) of the YBCO film was 1.75 $MA/cm^2$ at 77 K and self-field.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.86-91
• /
• 2021

Recently, functional clothes that can reduce deposition and/or penetration of fine dust have been developed. However, there are no methods to quantitatively evaluate the performance of these clothes. In this study, we developed a method to contaminate a fabric using fine dust and established an approach to quantitatively assess the degree of particle contamination on the fabric surface. Silicate powder was chosen as the particle to simulate fine dust because silicate particles are fluorescent under UV light; therefore, they can be distinguished from any color of non-fluorescent fabric surface. A camera with a high-resolution lens system was used to scan the surface of the contaminated fabric surface, and the degree of particle contamination of the fabric surface was analyzed in terms of the pixels corresponding to the area of the fabric surface contaminated by silicate particles. Finished or unfinished nylon fabrics as well as cotton fabrics were contaminated with silicate particles, and their surfaces were scanned using the established camera. The proposed assessment method was found to be useful for quantitatively comparing the degree of particle contamination of the fabrics.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.22-27
• /
• 2017

상온진공과립분사에 의해 slide glass 기판 위에 $1{\sim}30{\mu}m$의 두께를 가진 $TiO_2$ 코팅층을 제조하였다. $TiO_2$ granule 과립분말은 $1.5{\mu}m$의 평균 입도를 가진 Rutile 형태로 $600^{\circ}C$에서 4시간 하소 과정을 거쳤다. 공정변수로서는 반복횟수, 가스유량속도 및 과립투입속도로 하여 코팅층을 제조하였다. 반복횟수가 증가할수록 코팅층의 두께는 비례적으로 증가하였다. 이는 반복횟수의 증가에도 코팅층이 형성될 수 있는 적절한 운동에너지가 작용한 것을 알 수 있다. 가스유량속도에 따라 코팅층의 두께도 증가하였으나 1.7 V의 분말공급량에서는 25 LPM의 유량까지는 코팅층의 두께가 증가했지만, 35 LPM(L/min)의 유량에서는 두께가 감소하였다. 15 LPM의 낮은 유량속도에서는 분말공급량이 충분하더라도 성막에 필요한 운동에너지의 부족으로 코팅 층의 두께가 비례적으로 증가하지 않았다. $TiO_2$ 코팅층의 미세구조는 주사전자현미경 및 고성능 투과전자현미경을 이용하여 분석하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제44권1호
• /
• pp.124-135
• /
• 1997

연구배경 : 미만성 범세기관지염 (Diffuse panbronchiolitis)은 만성 기침, 화농성 객담과 호흡곤란을 주증상으로 하며, 호흡세기관지에 국한된 만성 염증성 질환으로 비교적 근래에 알려진 질환이다. 이 질환은 주로 일본에서 많이 보고되었는데, 우리나라에서 지금까지 발견된 환자의 수는 적으나 최근 수년간 이 질환에 대한 인식이 높아지면서 보고되는 증례가 많아지고 있다. 이 질환은 주로 임삼증상, HRCT 및 조직검사로 진단되는데, 특히 HRCT가 진단에 중요한 비중을 차지하는 것으로 알려져 있다. 하지만 HRCT 소견과 임상소견간에 어떤 상관관계가 있는지에 대해서는 아직 불확실하며, 폐환기주사에서 어떤 특정적인 소견이 나타나는 지에 대해서도 별로 연구된 바가 없다. 방법 : 이에 저자들은 최근 2년동안 미만성 범세기관지염으로 진단된 12명 환자들을 대상으로 임상적 특징을 관찰하고, HRCT 소견과 임상소견과의 상관관계를 관찰하는 한편, 폐환기주사에서 나타나는 특징적인 소견을 분석해 보았다. 결과 : l. 연령은 31-83세(평균 54.4세)에 분포하였고 남녀비는 4:8이었으며, 부비동염이 동반되었던 환자가 9명(75%)였다. 임상적 단계는 임상소견에 따라 3단계로 나누었는데, 각각 l 기(기관지수축과 저산소증)에 속하는 환자는 5명, 2기(기관지수축, 저산소증 및 호흡기 감염증)는 4명, 3기(기관지수축, 저산소증, 고탄산혈증, Pseudomonas에 의한 호흡기 감염증 및 우심부전)는 3명이었다. 2. HRCT 소견에 따라 4기로 나누었는데 l기는 한명도 없었으며, 2기가 4명, 3기가 5명, 4기가 3명으로서, 거의 모든 환자들이 발견 당시에 2기 이상임을 알 수 있었다. 그중 7예에서는 폐환기주사를 실시해 보았는데, 5예 (71.4 %)에서 이행부와 기도 중간부에 비정상적인 연무질침착이 나타나면서 말단 폐실질의 환기 결손소진을 보여서, 만성폐쇄성폐질환과는 대조적인 소견을 나타냈다. 3. 폐기능검사상 l예를 제외한 모든 환자에서 중등도 또는 중중의 폐쇄성 환기장애 소견을 보였고, 산소 투여없이 시행한 동맥혈가스 검사장 10예에서 저산소증, 2예에서 고탄산혈증의 소견을 나타냈다. 객담배양 검사상 P.aeruginosa가 자란 경우가 3예, K.pneumoniae는 2예, H. influenzae는 2예, S. aureus는 2예로 나타났다. 4. HRCT 병기가 높아질수록, 임상적 병기 (r=0.801, P < 0.01) 및 저산소증(r= -0.615, P < 0.05)이 심해지는 양상을 보였으며, ESR(r= 0.818, p < 0.01)도 상승되는 경향을 보였다. 또한 임상적 병기가 높아질수록 저산소증(r = -0.728, p < 0.01) 및 고탄산혈증 (r = 0.620, P < 0.05)이 심해지고, ESR(r= 0.662, p < 0.01)이 증가함을 알 수 있었다. 결론 : 이상의 결과로 보아 미만성 범세기관지염에서 HRCT 소견이 임상소견과도 밀접한 상관관계가 있기 때문에, HRCT는 미만성 범세기관지염의 진단, 중증도의 판정 및 경과 관찰에 유용할 것으로 생각된다. 또한 폐환기주사 역시 미만성 범세기관지염에서 특징적인 소견을 나타내므로, 이를 흉부 HRCT와 함께 병행한다면 미만성 범세기관지염의 진단이 더욱 용이할 것으로 추측되는 바이다.