• 보건행정학회지
• /
• 제19권2호
• /
• pp.21-35
• /
• 2009

Limited studies examined Medical Aid recipients' perception for amount of medical use. This study aimed to identify self-perception(optimal, under and overutilization) for amount, and real amount of medical use, and to determine factors associated with the perception. Subjects were 2,489 Medical Aid recipients among top 2% overusers in 2005. 200 case managers(CM) managing them conducted survey. CM interviewed them using 2005 medical claiming data from the Health Insurance Review & Assessment Service and structured questionnaire. Despite of overusers, perception of overutilization was only 26.9% and 23.6% in Class I and Class II, and that of underutilization was 21.4% and 18.7% respectively. In Class I, monthly total outpatient cost per capita of overutilization perception in 2006 was 206 thousand won higher than 150 thousand won of optimal utilization. Amounts of outpatient visit-days and prescribed cases of overutilization perception were higher than those of optimal and underutilization(p <0.0001). In Class II, overutilization perception had more prescribed cases(p 0.004). After adjustment of confounding factors including age and sex, the associated factors(odds ratio) with overutilization perception were hypertension(1.25), arthritis(1.32), depression(1.66), visit of multi medical institutions(3.09), and those of the underutilization were female(1.34), disabled(1.27), no family support(1.49), living in medium and small city(1.48), experience of unabled-visit to medical institution(2.54), frequent visit-recommendation from physician (1.36). In conclusion, education and consult are needed for subjects to improve the reasonable decision of medical use, and the self-care ability to manage diseases and symptoms. We suggest reinforcing the alternative service in community instead of costly medical institution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1869-1872
• /
• 2003

As SLA(Sterealithography), SLS(Selective Laser Sintering), LOM(Laminated Object Manufacturing), FDM(Fused Deposition Modeling) etc. The FDM system the heart of a study and is developed by Stratasys co. ltd, in US., is small and cheap R.P. The material filament is heated until the material reaches a near-liquid state, it is pumped through a nozzle and become hand with a shape required, and this nozzle move pumping on the previously deposited material. Such FDM system that choice deposition type with X-Y plouter obtain in the thin continue layer by decreasing amount of extrusion or to central the injection amount when the head slow down at the corner, but in the process that fusion wax or resin become hand, deformation occur and it will affect the shape accuracy and the surface roughness. Such effect will depreciate quality and reliability of the product. Therefore, when the product made in actuality, the fundamental study on the basis geometry(surface, volume, line, angle) must be preceded and it have been research by many Free Form Fabrication. So, this basic object study purpose to obtain the fundamental geometry data and to enhance the surface roughness of the shape. And an operant can use the data for the progress of the surface roughness. This study research the estimation and application of the prototype surface roughness by adjustment the injection amount. And basie of this research, describe the pattern of prototype surface roughness and also used the result to estimate the surface of prototype.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1418-1427
• /
• 2006

Windshield wipers play a key role in assuring the driver's safety during precipitation. The traditional wiper systems, however, requires driver's constant attention in adjusting the wiper speed and the intermittent wiper interval because the amount of precipitation on the windshield constantly varies according to time and vehicle's speed. Because the manual adjustment of the wiper distracts driver's attention, which may be a direct cause of traffic accidents, many companies have developed automatic wiper systems using some optical sensors with various levels of success. This paper presents the development of vision-based smart windshield wiper system that can automatically adjust its speed and intermittent interval according to the amount of water drops on the windshield. The system employs various image processing algorithms to detect water drops and fuzzy logic to determine the speed and the interval of the wiper.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.592-599
• /
• 2010

A porous nickel-tin nano-dendritic electrode, for use as the anode in a rechargeable lithium battery, has been prepared by using an electrochemical deposition process. The adjustment of the complexing agent content in the deposition bath enabled the nickel-tin alloys to have specific stoichiometries while the amount of acid, as a dynamic template for micro-porous structure, was limited to a certain amount to prevent its undesirable side reaction with the complexing agent. The ratios of nickel to tin in the electro-deposits were nearly identical to the ratios of nickel ion to tin ion in the deposition bath; the particle changed from spherical to dendritic shape according to the tin content in the deposits. The nickel to tin ratio and the dendritic structure were quite uniform throughout the thickness of the deposits. The resulting nickel-tin alloy was reversibly lithiated and delithiated as an anode in rechargeable lithium battery. Furthermore, the resulting anode showed much more stable cycling performance up to 50 cycles, as compared to that resulting from dense electro-deposit with the same atomic composition and from tin electrodeposit with a similar porous structure. From the results, it is expected that highly-porous nickel-tin alloys presented in this work could provide a promising option for the high performance anode materials for rechargeable lithium batteries.

• 전기학회논문지P
• /
• 제66권1호
• /
• pp.21-26
• /
• 2017

Failure of high-voltage transmission line, which is responsible for large-scale power transmission, can be reason for system voltage instability. There are many methods to prevent voltage instability like adjustment of equipment, the generator voltage setting, and load shedding. Among them, the load shedding, have a problem of economic loss and cascading effect to power system. Therefore, the execution of load shedding, amount and timing is very important. Conventionally, the load shedding setting is decided by the preformed simulation. Now, it is possible to monitor the power system in real time by the appearance of PMU(Phasor Measurement Unit). By this reason, some of research is performed about decentralized load shedding. The characteristics of the load can impact to amount and timing of decentralized load shedding. Especially, it is necessary to consider the influence of the induction motor loads. This paper review recent topic about under voltage load shedding and compare with decentralized load shedding scheme with conventional load shedding scheme. And simulations show the effectiveness of proposed method in resolving the delayed voltage recovery in the Korean Power System.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.126-132
• /
• 1978

This study was carried out through the survey questionaries in order to get the information for proper operating technique of the two-wheel tractors which are widely used in the farm, and investigated various accidents which occurred during the operation of two-wheel tractors for farm works in 7 Provinces of Korea. The summarized results are as follows ; 1. Annual accident frequency of the two-wheel tractor was 2.07 times, and the average rate of accident was 0.72 times per hour. Its value was the largest in the pre-operations , and the smallest in the threshing operation. 2. The accident distribution according to each month was nearly propertional to the operating hours of the two-wheel tractor. More than 60 % of total accident was concentrated during the rice transplanting and harvesting season. 3. The careless accident was more than 50% of total accident , and inevitable accident about 18% . The rate of careless accident showed the highest in pre-operation such as engine starting, check, and adjustment, and belt change. 4. The serious wounded operator was 7.1 % to total wounded operator , and about 50 % of accident of casualties to operators occurred during haruling operations. 5. The amount of casualties to property was range of 1,000 to 10,000 won, and annual total amount per unit tractor could be estimated to be 10 , 000 won.

• 에너지공학
• /
• 제28권2호
• /
• pp.55-62
• /
• 2019

본 연구는 가스가마를 사용하여 청자를 소성 할 경우 최적의 소성조건을 구하고자 하였다. 특히 환원분위기와 산화 분위기 등의 소성분위기를 가마내의 CO 농도로 명확하게 정의하였다. $1250^{\circ}C$로 청자유약을 소성한 경우, 가마 안의 일산화탄소 양이 0~4,500PPM에서는 산화 4,500~25,000PPM에서는 중성, 25,000PPM 이상에서는 환원분위기가 됨을 관찰 할 수 있었다. 가스 가마 안의 소성분위기와 소성온도를 균일하게 하면서 가스소모량과 소성시간을 줄이기 위해서는 가마 안의 연돌을 일부 막은 후 댐퍼로 조절하면 된다. 이와 같은 조절방법으로 가스량은 40%, 소성시간은 1시간을 절약할 수 있다.

• 무역상무연구
• /
• 제52권
• /
• pp.97-118
• /
• 2011

85% of South Korea's gross domestic product(GDP) depends on trade. Exports amount in 2011 exceeds $ 5,000Billion. Korea is expected to achieve $ 1 trillion in total trade volume and will become finally the ninth in the world. We do not have a lot of natural resources and are bound to export the finished products to pursue economic development. In other words, trade sector is very essential for Korea to continue economic growth. The department of trade in universities have brought up the concerned students serving for trade sectors. Currently, "half-price tuition" in universities has become very controversial issue in Korea so this paper studies the efficiency of "the Department" because the universities may reconsider the adjustment of tuition fee, if they can enhance the efficiency level. DEA model is used for the analysis. As a result, 8 DMUs like KAN1, KEI5, BAE10 etc. show relatively higher efficiency levels.

• 가정과삶의질연구
• /
• 제19권4호
• /
• pp.85-103
• /
• 2001

After-school activities were examined for 449 rural children in first through seventh grades. Childrens engagement of after-school activities were significantly different by child and family characteristics, especially childrens age and behavior control ability. Findings showed a decline in amount of time spent studying and reading and a raise in going to a game-room. Childrens school achievement, emotional and social development were also differed by a range of after-school activities. Children spent more time in studying and reading showed higher grades, happiness, school life. Teachers reported greater aggressive behavior and less adjustment of school life among children participating more in game related activities and hanging out. Watching TV, doing house chores and visiting friends were not variables which showed different outcomes.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.47-65
• /
• 1998

We consider a multiperiod capacity planning problem for determining a mix of flexible and dedicated capacities under budget restriction. These capacities are controlled by purchasing flexible machines and/or new dedicated machines and disposing old dedicated machines. Acquisition and replacement schedules are determined and operations are assigned to the flexible or dedicated machines for the objective of minimizing the sum of discounted costs of acquisition and operation of flexible machines, new dedicated machines, and old dedicated machines. In this research, the Problem is formulated as a mixed integer linear Program and solved by a Lagrangian relaxation approach. A subgradient optimization method is employed to obtain lower bounds and a multiplier adjustment method is devised to improve the bounds. We develop a linear programming based Lagrangian heuristic algorithm to find a good feasible solution of the original problem. Results of tests on randomly generated test problems show that the algorithm gives relatively good solutions in a reasonable amount of computation time.