• 디지털융복합연구
• /
• 제10권6호
• /
• pp.171-179
• /
• 2012

본 연구에서는 전문대생의 심리적 특성과, 직업가치, 대학생활적응간의 영향관계를 규명함으로써 대학생활의 중요성 및 대학생활지도의 기초가 되고자 하였다. 연구결과를 요약하면 첫째로, 전문대생의 심리적 특성은 대학생활적응에 긍정적 영향을 미치는 것으로 나타났다. 특히 자아존중감, 자아정체감의 형성이 어떻게 되느냐에 따라서 대학생활적응이 잘 된다는 결과를 얻을 수 있었다. 둘째, 전문대생의 심리적 특성은 직업가치형성에는 영향을 미치지 않는 것으로 나타났다. 마지막으로 직업가치는 대학생활적응에 영향을 미치지 않는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.75-79
• /
• 2003

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM) using the line heating as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.700-705
• /
• 2002

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by the distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. In order to minimize the weld-induced angular distortion in thick weldments, this paper proposes the optimum groove design for various plate thicknesses as the distortion control method. The validity of this method has been substantiated by a number of numerical simulations and experiments.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.257-266
• /
• 2014

This study was planned to investigate the effect of the exposure to hazard factors on work environment satisfaction. Existing researches about job satisfaction have focused on the general working conditions, such as working hours, wage, human relationship, job task and so on. Korean Working Conditions Survey was used for this study because that relevant questions were included. The effect of the exposure to hazard factors on work environment satisfaction may be produced by hierarchical regression analysis because of comparison with existing model for work environment satisfaction. The exposure to hazards factors were statistically significant effect on work environment satisfaction after adjusting other confounding variables, such as gender, age, educational level, job security, work hour, work load, work autonomy, social support, etc. This study has some limitation because that KWCS was cross sectional survey. Some researches about the causal effect and its mechanism may be suggested as future study.

• Safety and Health at Work
• /
• 제13권1호
• /
• pp.17-22
• /
• 2022

Background: This study aimed to identify work-related risk factors, including long working hours and night/shift work, for unmet health care need using data of a representative panel of Korean adults. Methods: Associations between work-related factors and unmet health care need were analyzed using data of 3,440 participants (10,320 observations) from the 2011-2013 Korean Health Panel Study. A generalized estimating equation was used for the analysis of repeated measures. Results: The prevalence of unmet health care was 16.6%. After adjusting sex, age, socioeconomic status, work characteristics, and working more than 60 hours per week (odds ratio [OR]: 1.43, 95% confidence interval [CI]: 1.23-1.65) or 50-59 hours per week (OR: 1.26, 95% CI: 1.08-1.46) instead of 40-49 hours per week and night/shift work (OR: 1.27, 95% CI: 1.06-1.51) were associated with unmet health care need. Conclusion: Long working hours and night/shift work are risk factors for unmet health care need among the Korean working population.

• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.173-180
• /
• 2015

North Korea has developed ballistic missiles over the past 30 years. It is believed that they have a variety of ballistic missiles more than 1,000. Because these ballistic missiles threaten South Korea directly, accurate analysis of them is essential. Flight trajectories of the ballistic missiles are generally changed by means of adjusting payload weight, Isp, flight path angle, and cut-off time. The flight path angle is widely used to control the missile range. However it is difficult to predict the missile trajectory exactly in real operational environment because the missile could be launched according to its intention and purpose. This work analyzed the 1,000 km range MRBM's trajectory characteristics from adjusting flight path angle which is depressed as well as lofted method. The analysis of missile trajectory characteristics is based on the simulation of the missile trajectory model developed by KNDU research team.

• 한국산업보건학회지
• /
• 제20권3호
• /
• pp.139-146
• /
• 2010

Recent studies suggest that prolonged standing at work is associated with varicose veins (VV). The objective of this study was to analyze the differences of VV risk in terms of work types in casino dealers and hotel service workers. Symptoms of VV were evaluated using a self-reported questionnaire from 2,092 participants, and muscle fatigue in the lower legs were evaluated using surface electromyography. The shift rate of median frequency in Gastrocnemius was -30.0% among the casino dealers working in prolonged static standing posture, and - 14.3% among the casino dealers sitting during working time. After adjusting age, gender, smoking, and family history of VV, the risk ratio of VV was 3.67(95% CI 2.03-6.59) in group I (prolonged standing and occasional walking at work), 6.29(95% CI 3.48-11.35) in group II (prolonged standing, occasional walking and heavy lifting at work), and 8.07(95% CI 4.51-14.43) in groupIII(prolonged static standing at work). In conclusion, prolonged standing at work may be a work related risk factor of VV.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.47-51
• /
• 1996

In this paper, we propose a method for compliance control of a SCARA type 2-freedom direct drive(DD) manipulator. Each joint of the manipulator is driven by a travelling ultrasonic motor(USM). The travelling USM has good some characteristics over conventional servo motors such as compact size, light weight, silent motion, high torque and high speed response. By controlling the elasticity and viscosity of robot joints, a robot can work in compliance with external environment. we control the elastic coefficient and the viscous coefficient of joint by adjusting the phase difference of the motor power. And we contemplate transient response of USM with adjusting the elastic coefficient and the viscous coefficient. To use the result, we can control the robot to reach its goal with compliance motion. It remains for further research to develop the impedance control of USM.

• 한국산업융합학회 논문집
• /
• 제14권3호
• /
• pp.113-119
• /
• 2011

This study analyzed facts affecting the performance of refrigeration systems after throttling actions, by changing the amount of refrigerant according to adjusting the opening of manual expansion valve to 80%, or 20% with vapor compressional refrigeration training equipment. At opening of 20%, the inlet and outlet temperature of compressor, subcooling and superheat, condenser heat, refrigeration effect, flash gas heat, coefficient of performance were higher, while at 80%, condensing pressure, evaporating pressure, compression work were higher, Thus, we could see changes in the amount of refrigerant affect the performance of the refrigeration system.

• Journal of Preventive Medicine and Public Health
• /
• 제52권5호
• /
• pp.292-298
• /
• 2019

Objectives: Presenteeism is currently recognized as a significant global health issue that can potentially cause productivity losses. Hence, many studies have analyzed the relationships between workplace factors and presenteeism. However, few studies have considered non-occupational factors. This study examined the associations between presenteeism and activities outside work, including volunteering, self-development, leisure/sports, and gardening and house repair activities, in Korean wage workers. Methods: This study analyzed the fourth Korean Working Conditions Survey, in which a total of 19 294 wage workers participated. To identify relationships between presenteeism and activities outside work, multivariate logistic regression analysis was used after adjusting for general and occupational characteristics. Results: Self-development and leisure/sports activities significantly increased the odds ratio (OR) of presenteeism (OR, 1.166; 95% confidence interval [CI], 1.061 to 1.282 and OR, 1.276; 95% CI, 1.181 to 1.379, respectively). Conclusions: Certain activities outside work, such as self-development or leisure/sports, were related to presenteeism among Korean wage workers. Although many previous studies have emphasized the positive effects of those activities on health, this study documented negative effects of these activities outside work on health.