• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.577-588
• /
• 2018

A major concern in deep excavation project in soft clay deposits is the potential for adjacent buildings to be damaged as a result of the associated excessive ground movements. In order to accurately determine the wall deflections using a numerical procedure such as the finite element method, it is critical to use the correct soil parameters such as the stiffness/strength properties. This can be carried out by performing an inverse analysis using the measured wall deflections. This paper firstly presents the results of extensive plane strain finite element analyses of braced diaphragm walls to examine the influence of various parameters such as the excavation geometry, soil properties and wall stiffness on the wall deflections. Based on these results, a multivariate adaptive regression splines (MARS) model was developed for inverse parameter identification of the soil relative stiffness ratio. A second MARS model was also developed for inverse parameter estimation of the wall system stiffness, to enable designers to determine the appropriate wall size during the preliminary design phase. Soil relative stiffness ratios and system stiffness values derived via these two different MARS models were found to compare favourably with a number of field and published records.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1061-1070
• /
• 2018

The main purpose of retaining wall methods for deep excavation is to keep the construction site safe from the earth pressure acting on the backfill during the construction period. Currently used retaining wall methods include the common strut method, anchor method, slurry wall method, and raker method. However, these methods have drawbacks such as reduced workspace and intrusion into private property, and thus, efforts are being made to improve them. The most advanced retaining wall method is the prestressed wale system, so far, in which a load corresponding to the earth pressure is applied to the wale by using the tension of a prestressed (PS) strand wire. This system affords advantages such as providing sufficient workspace by lengthening the strut interval and minimizing intrusion into private properties adjacent to the site. However, this system cannot control the tension of the PS strand wire, and thus, it cannot actively cope with changes in the earth pressure due to excavation. This study conducts a preliminary numerical analysis of the field applicability of the controllable prestressed wale system (CPWS) which can adjust the tension of the PS strand wire. For the analysis, back analysis was conducted through two-dimensional (2D) and three-dimensional (3D) numerical analyses based on the field measurement data of the typical strut method, and then, the field applicability of CPWS was examined by comparing the lateral deflection of the wall and adjacent ground surface settlements under the same conditions. In addition, the displacement and settlement of the wall were predicted through numerical analysis while the prestress force of CPWS was varied, and the structural stability was analysed through load tests on model specimens.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.509-517
• /
• 2022

도시의 대형화로 인해 도심지 지하공간은 점점 고밀화되어 가고 있으며, 지하공간 활용에 대한 수요 또한 급격히 증가하고 있다. 도심지에서는 상부뿐만 아니라 지중에도 통신, 교통 등을 위한 지중 구조물 또한 존재하고 있다. 이러한 도심지의 지중에 신설 구조물을 시공할 경우, 상부 및 지중에 존재하는 인접 구조물과의 상호거동에 대한 이해가 필수적이다. 따라서 본 연구에서는 기존 군말뚝 및 운영중 터널에 인접하여 터널이 신설될 경우 침하와 지중의 전단변형을 유한요소해석을 통해 분석한다. 운영 중 터널-말뚝 간의 이격거리, 말뚝 개수, 말뚝 중심간격 등이 변수로 고려되었으며, 수치해석을 통해 말뚝 및 인접 지반 침하를 비교한 결과, 말뚝의 중심간격보다 군말뚝-신설 터널 수직이격거리 및 운영중 터널-신설 터널 간의 수평이격거리가 침하에 더 큰 영향을 미치는 것으로 나타났다. 또한, 구조물 간의 이격거리 증가에 따라 신설 터널 굴착에 따른 전단변형률이 미치는 영향이 감소되는 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제10권2호
• /
• pp.13-19
• /
• 2011

PC 암거는 터파기, 하부지반 처리, 암거 거치, 상호접합면에 누수방지용 패킹재 부착, PS 강선의 긴장을 통한 상호박스 접합, 되메우기 등의 일련의 과정으로 시공되어진다. 이 때 부적절한 하부지반 처리는 박스간 상호 부등침하를 야기할 수 있으며 결과적으로 지하수의 와류 및 내부유수의 누수를 발생시키게 된다. 본 연구에서는 하부지반이 연약한 경우 PC 암거 접합부의 부등침하를 저감하기 위하여 개발된 PC 기초판과 일체화된 암거의 거동을 현장 시험시공을 통해 분석하였다. 암거의 거동은 접합부에서 암거간의 벌어짐, 하부지반에 작용하는 토압 증가량, 암거 상부의 침하량 계측을 통해 분석되었으며, 분석결과로부터 PC 기초판과 일체화된 암거가 일반적인 시공방법인 PS 강선의 인장으로 체결된 암거에 비하여 침하 및 접합부에서 벌어짐이 적게 발생하는 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제5권3호
• /
• pp.71-78
• /
• 2004

In conventional method of supporting soil shuttering wall during excavation a system of struts and wales to provide cross-lot bracing is common in trench excavations and other excavations of limited width. This method, however, becomes difficult and costly to be adopted for large excavations since heavily braced structural systems are required. Another expensive and unsafe situations are expected when temporary struts must be removed for the construction of underground structures. This paper introduces innovative strut systems which can be used as permanent underground structures after its role as brace system to resist earth pressure during excavation phase. Underground structural system suggested from architect is checked against the soil lated pressures before the analysis of stresses developed from gravity loads. In this technology, named SPS(Struts as Permanent System), retaining wall is installed first and excavation proceeds until the first level of bracing is reached. Braces used as struts during excavation will serve as permanent girders when buildings are in operation. Simultaneous construction of underground and superstructure can proceeds when excavation ends with the last level of braces being installed. In this paper, construction sequence and the calculation concept are explained in detail with some photo illustrations. SPS technology was applied to three selected buildings. One of them was completed and two others are being constructed Many sensors were installed to monitor the behavior of retaining wall, braces as column in terms of stress change and displacement. Adjacent ground movement was also obtained. These projects demonstrate that SPS technology contributes to the speed as well as the economy involved in construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1046-1053
• /
• 2006

In the large scale recent reclaiming works performed within the wide spatial boundary, evaluation of long-term consolidation settlement and residual settlement of the whole construction area is sometimes made with the results of the limited ground investigation and measurement. Then the reliability of evaluation has limitations due to the spatial uncertainty. Additionally, in case of large scale deep excavation works such as urban subway construction, there are a lot of hazardous elements to threaten the safety of underground pipes or adjacent structures. Therefore it is necessary to introduce a damage prediction system of adjacent structures and others. For the more accurate analysis of monitoring information in the wide spatial boundary works and large scale urban deep excavations, it is necessary to perform statistical and spatial analysis considering the geographical spatial effect of ground and monitoring information in stead of using diagrammatization method based on a time-series data expression that is traditionally used. And also it is necessary that enormous ground information and measurement data, digital maps are accumulated in a database, and they are controlled in a integrating system. On the abovementioned point of view, we developed Geomonitor 2.0, an Internet based real time monitoring program with a new concept by adding GIS and geo-statistical analysis method to the existing real time integrated measurement system that is already developed and under useful use. The new program enables the spatial analysis and database of monitoring data and ground information, and helps the construction- related persons make a quick and accurate decision for the economical and safe construction.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.685-693
• /
• 2015

도심지에서는 지속적인 지하 개발이 요구되고 있으며, 도심지공사는 주변구조물 및 기존 도로의 기능을 유지하면서 신속하게 진행되어야한다. 이러한 상황에서 비개착공법은 시공 시 주변 지반의 변위를 최소화하고 건설을 진행하기에 매우 유용한 공법이다. 그러나 비개착공법 선정을 위해서는 경제성, 시공성, 환경문제, 주변구조물 등 다양한 현장조건들을 고려하여야 한다. 따라서 본 연구에서는 의사결정기법을 활용하여 비개착공법의 최적 선정을 위한 기초연구를 수행하였다. 특히, 다중복합의사결정기법 중에 하나인 계층분석법을 이용하여 전문가 의견을 반영한 합리적인 공법선정의 평가기준과 규칙을 설정하였다. 분석 결과, 비개착공법을 선정하는데 있어서 필요한 고려항목들의 중요도를 도출하였고, 지반조건별로 가장 효과적인 비개착공법들이 제시되었다.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.83-91
• /
• 2017

Recently, ground subsidence frequently occurs in downtown area. The major causes of the subsidence on the subsurface were the damages of the water supply and sewer pipelines and excavation works in adjacent areas, etc. Because of these various factors, it is not easy to analyze the tendency of occurrence of ground subsidence. The purpose of this study is to clarify the effect of ground subsidence by the change of the fine particle content and ground water level and to establish the ground subsidence mechanism. In this study, a model soil-box was manufactured to simulate the failure of the old sewer pipe which is one of the causes on ground subsidence. And a model test was conducted to investigate the effects of fine contents and ground water level on the cavity occurrence. From the test results, firstly the higher the ground water level, the faster the primary cavity is formed as the seepage stress increases. As a result, the secondary cavity and the ground subsidence rapidly progress due to the relaxation of the surrounding ground. The total amount of discharged soil was decreased as the fine content increased.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.83-97
• /
• 2018

터널은 도로, 철도, 지하철과 같은 교통의 통로이자 수로, 전력구, 비축기지와 같은 특수목적을 위해 널리 활용되고 있으며, 터널의 사용 목적, 주변 지반조건 및 경제성에 따라 다양한 터널 형상으로 시공되고 있다. 이에 대해 기존 터널과 주변지반 및 구조물에 관한 연구는 꾸준하게 발표되었으나 단일 형상에 대해 터널굴착 시 주변 지반과 구조물의 거동을 분석한 연구들이 대다수이다. 터널의 붕괴사고는 지상 구조물의 붕괴사고 보다 막대한 인적, 물적 손실을 가져오기 때문에 터널 굴착 및 주변지반의 거동을 관측하고 분석하는 작업은 매우 중요하며, 단일 형상이 아닌 다양한 터널 형상에 대한 연구가 필요할 것으로 판단된다. 따라서, 본 연구는 trapdoor장치를 이용한 실내 모형시험을 통해 군말뚝 하부에 터널 정거장 굴착 시 주변지반의 거동을 측정하였다. 이때 터널 정거장 형상의 단면을 arch와 box 형태로 제작하였으며, 각 터널 정거장 형상 별 0.1B, 0.25B, 0.4B로 터널과 군말뚝 간 이격거리를 다르게 하여 다양한 조건에서의 지반거동을 분석하였다. 또한, 근거리 사진계측 및 이미지프로세싱 기법을 통해 지반의 거동을 관측하였으며, 유한요소 수치해석을 통해 실내 모형시험, 근거리 사진계측의 결과와 비교 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.992-1006
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. Cutting-slope adjacent to outlet of spillways had been originally designed to be 63 degrees and about 65m in height. Examination is carried out in preceding construction that it is caused to some problems possibility which of machine for slope cutting couldn't approach to the site, blasting for cutting slope might have negative influence on highway and roads nearby, and fine view along the Tae-hwa river would be eliminated. In order to establish stability of tunnel and more friendly natural environment that we are carry out detailed geological surface survey and analysis of slope stability. So, we are design and construct for tunnel excavation with possible method that it is keep up natural slope. The result of survey and analysis that natural slope was divided 3 zone(A, B, C zone). In A and B zone, in first removed floating rock, high tensile tension net is install that it prevent of release and falling of rock, in order to security during under working. In addition to, pre-stressed rock anchor is install purpose of security during tunnel excavation because of fault zone near vertical developed above excavation level. Zone C is relatively good condition of ground, design is only carry out random rock bolt. All zone are designed and constructed drainage hole for groundwater and surface water is easily drain. Desinged slpoe is harmony with near natural environment. Successfully, construction is completed.