• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.213-219
• /
• 2014

The rheological characteristics of highly concentrated polymer bonded explosive simulant were studied. Hydroxyl terminated polybutadiene (HTPB) and polyethylene plastomer (Exact) were used as binders. Sugar and Dechlorane particles whose physical properties are similar to research department explosive (RDX) were used as fillers. When HTPB was used, diethyl hexyl adipate (DEHA or DOA) was used as a plasticizer together for some cases. Highly concentrated suspensions were mixed in a batch melt mixer (Rheomixer 600, Haake) and rheological properties were measured by plate-plate and capillary rheometers. Wall slip phenomena, thixotropy with shear hysteresis, and flow instability were investigated as shear rate and amount of fillers changed.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.257-264
• /
• 2010

In order to improve the breaking strength and elongation of Polybutylene succinate (PBS) monofilament, the monofilament was produced by blending PBS and Polybutlyne adipate-co-terephthalate (PBAT). The PBS/PBAT blend monofilament was prepared by the melt spinning system, and the weight ratios of the compositions of PBS/PBAT was 100/0, 95/5, 90/10 and 85/15, respectively. The breaking strength, elongation, softness and crystallization of PBS/PBAT blend monofilament were analyzed by using a tensionmeter, softness measurement, X-ray diffractometer in the both dry and wet conditions. The PBS/PBAT blend monofilaments were spun in the take-up velocity of 1.19m/sec under the drawing ratio of 6.8:1 condition. The production volumes of PBS/PBAT blend monofilaments showed 20% less than that of Nylon. The breaking strength of PBS/PBAT blend monofilaments were decreased as PBAT contents increased, while elongation and softness were increased. In case of PBAT content were over 5%, the breaking strength, elongation and softness of PBS/PBAT blend monofilaments were not shown to increase in spite of increasing in PBAT contents. Based on these results, it was possible to make the monofilaments with the maximized physical properties when the PBAT contents at 5%.

• Korean Journal of Microbiology
• /
• v.38 no.2
• /
• pp.57-61
• /
• 2002

To investigate the characteristics of carbon sources utilization by the intestinal microflora of starfish, starfishes (Asterias amurensis) were collected from the South Sea near Jangheung-gun sumun-ri of Jeollanam-do on July 14,2000. The population densities of heterotrophic bacteria were in the range of $8.65{\pm}0.65{\times}10^3\cfu{\cdot}g^{-1}$ in the interval organs of starfish. Total 24 strains (Gram-negative bacteria. 11 strains, Gram-positive bacteria: 13 strains) from the internal organs of starfish were isolated. Dominant bacteria were Genus nbrio, Staphylococcus, and Corynebacterium. A high percentage of isolates was Gram positive rods. The catalase and oxidase positive were shown 54.2% and 20.8% of isolated bacteria, respectively. Isolated Gram negative and positive bacteria utilized various carbon sources. Among them, glucose could be utilized by all the isolated Gram negative bacteria, and sucrose, mannose, and maltose were utilized by a relatively high percentage of isolates. On the other hands, adipate and phenyl acetate were shown no utilization. In case of Gram positive bacteria, glucose was shown the highest utilization and the next highest utilization was fructose, trehalose, and maltose.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.304-310
• /
• 1986

A. calcoaceticus C10 grown on cyclohexanol as sole source of carbon and energy produced cyclohexanol dehydrogenase(CDH) and glucose dehydrogenase (GDH) concomitantly. CDH and GDH were different in coenzyme, induction and electrophoretic patterns. CDH depended for activity on $NAD^+$ only, while GDH required $NAD^+$ or $NADP^+$ alternatively. CDH was produced in the medium added cyclohexanol, but GDH was produced in various media such as LB, LB added 0.2% glucose or cyclohexanol and cyclohexanol medium. Productivity of CDH in A. calcoaceticus C10 was enhanced about 8 times by the addition of 0.2% cyclohexanol to LB medium after 4 hours as much as LB medium only. Production of CDH was induced by cyclohexanol, cyclohexanone, cyclohexan-1,2-diol and cyclohexene oxide, but not induced by ${\varepsilon}-caprolactone$ and adipate.

• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.1037-1043
• /
• 2015

Since single-use disposable plastic usage has steadily been increasing, recent trends in polymeric research point to increasing demand for eco-friend materials which reduce plastic waste. A huge amount of non-degradable polypropylene (PP)-based pots for seedling culture are discarded for transplantation. The purpose of this study is to investigate an eco-friendly biodegradable material as a possible substitute for PP pot. The blend of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) was used because of its good mechanical and flexible properties as well as biodegradation. After landfill, various properties of the blend pot were investigated by UTM, SEM, NMR and TGA. The results showed the tensile strength of the blend film rapidly decreased after 5 weeks of landfill due to degradation. From NMR data after landfill, the composition of PLA in the blend was decreased. These results indicate that the biodegradation of the blend preferentially occurs in PLA component. To investigate the effect of holes in pot bottom and side on root growth, a plant in the pot was grown. Some roots came out through holes as landfill period increases. These results indicate that the eco-friendly pot can be directly planted without the removal of pot.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.881-889
• /
• 1998

For the application of the commercially modified starch in frozen and retort foods, apparent viscosity and water loss were measured at each stages of heating, sterilization and freezing-thawing stages. Apparent viscosity showed the exponential increase with concentration and the slopes of apparent viscosity against concentration in the Firm-Tex(hydroxypropyl distarch phosphate), Hi-Flo(acetylated distarch adipate) and Colflo 67(acetylated distarch adipate) from waxy maize starch were higher than those of Amyloacetate M20(starch acetate) and X-amylo 250(distarch phosphare) from potato starch. In the presence of 1 or 2% NaCl, X-amylo 250 among modified starches showed the increase in water loss and the decrease in apparent viscosity, whereas Colflo 67, Hi-Flo and Firm-Tex were little affected by NaCl. In the presence of 1 or 2% sucrose, water loss and apparent viscosity of the modified starches were not affected. In the range of pH 4~8, water loss and apparent viscosity of the modified starches had no change but the differences were detected to some extent between each of heating, sterilization and freezing-thawing stages. In the apparent viscosity and water loss of the modified starches after 3 week storage from heating and sterilization, Hi-Flo, Amyloacetate M20 and X-amylo 250 were not changed at the storage period, and the overall acceptability of retort food containing the modified starches such as Firm-Tex and Amyloacetate M20 were favored more than others. In the apparent viscosity and water loss of the modified starches which have been frozen and thawed three times repeatedly, Colflo 67, Hi-Flo and Firm-Tex were not changed in freezingthawing, and the overall acceptability of frozen food containing Firm-Tex was most favored.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.349-354
• /
• 2022

This research was conducted in order to improve the hydrolysis resistance and mechanical properties of a resin compound and biodegradable mulching film, produced through the use of PBAT(Poly Butylene Adipate-co-Terephthalate) and PLA(Poly Lactic Acid). Various ratios of chain extenders and mechanical properties according to the annealing temperature conditions were investigated. The annealing process showed that compound resin can improve the crystallization capacity. In addition, incorporation of the chain extender was shown to improve and increase the tensile strength and hydrolysis resistance of the film. In the case of 0.6phr chain extender, the tensile strength was 383.0Kgf/cm², which was improved by 155% compared to the control films. When the blow up ratio(BUR) was 2.5, the optimal tensile strength of the film increased greatly, expanding up to 379.0/195.2kgf/cm² in the both machine direction (MD) and transverse direction (TD).

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.553-559
• /
• 2022

The film mulching technology is useful for controlling soil temperature and moisture by covering the soil surface, and for suppressing weeds. In this study, in order to improve the hydrolysis resistance and mechanical properties of the biodegradable mulching film, PBAT(Poly butylene adipate-co-terephthalate) and PLA(Poly lactic acid) were modified using a twin-screw extruder and then the physical and biodegradable properties of the film were investigated. After landfill the mulching film in soil, the weight reduction of the film was confirmed by period, and plant growth was observed after mulching in the dry paddy field for rice farming. Mulching films with improved hydrolysis resistance showed excellent crop growth properties, and biodegradable mulching films can offer potential as a new alternative for environmentally friendly, efficient and sustainable agricultural practices.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.20-29
• /
• 2024

Membranes are increasingly used in a variety of applications including desalination, gas separation, disposable filters, and healthcare products. Recently, sustainable and green membrane fabrication technology is recognized as one of the decisive initiatives to reach the target of pollution control. Especially, the fabrication of bio-based membranes using such as poly lactic acid (PLA), polybutylene adipate terephthalate (PBAT), and polybutylene succinate (PBS) has attracted considerable attention. The phase inversion method is one of the versatile approaches for preparing PLA membranes. This article reviews the recent advances in PLA membrane preparation via the phase inversion method. Furthermore, it provides a perspective on the potential outlook for future advances. Overall, this review has demonstrated has been conducted in the area of bio-based PLA membranes.