• 접착 및 계면
• /
• 제8권4호
• /
• pp.23-31
• /
• 2007

고분자 소재에 평판형 플라즈마 전처리 방식을 적용시켜 표면의 접촉각 및 접착력을 향상시켰다. 분위기 기류를 질소로 하고 유량을 30~100 mL/min, 반응시간은 0~30초로 하여 PU 소재를 주 물질로 하여 EVA foam, Leather (Action), Rubber, Unwoven 소재에 대하여 각 조건별로 플라즈마 처리시켜 처리 전후의 각 소재별 접촉각과 접착박리강도 측정을 통한 소재의 물성변화와, SEM분석을 이용한 처리 전후의 표면 변화를 측정하여 플라즈마 처리의 영향과 효과를 산출하였다. 대기압 평판형 플라즈마 반응기를 이용하여 최적 조건인 기체유량 100 mL/min, 전처리시간 10초에서 EVA foam, Leather (Action) 및 Rubber 소재의 접촉각 감소와 접착력 향상을 확인하였다.

• Current Research on Agriculture and Life Sciences
• /
• 제32권1호
• /
• pp.18-23
• /
• 2014

본 연구에서는 유변물성측정기를 이용하여 HPMC 첨가량, 물 양, HPMC 분자량, 셀룰로오스 에테르 치환제 및 치환도가 쌀 반죽의 압축 및 집착 특성에 미치는 영향에 대해 살펴보았다. HPMC 첨가량이 증가함에 띠라 접착강도는 꾸준히 증가하였으나, 압축강도는 2% HPMC 첨가량에서 최대 강도를 보였다. HPMC의 분자량이 증가하거나, 물 양이 감소할수록 쌀 반죽의 압축강도 및 접착강도가 증가하는 결과를 보였다. 이들 인자 외에도, 셀룰로오스 에테르의 치환제 및 치환도도 쌀 반죽의 압축강도 및 접착강도를 결정하는 중요한 인자임을 확인하였다.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.51-57
• /
• 2004

Micro/nano adhesion and friction properties of mixed self-assembled monolayer (SAM) with different chain length for MEMS application were experimentally studied. Many kinds of SAM having different spacer chains(C6, C10 and C18) and their mixtures (1:1) were deposited onto Si-wafer, where the deposited SAM resulted in the hydrophobic nature. The adhesion and friction properties between tip and SAM surfaces under nano scale applied load were measured using an atomic force microscope (AFM) and under micro scale applied load were measured using ball-on-flat type micro-tribotester. Surface roughness and water contact angles were measured with SPM (scanning probe microscope) and contact anglemeter. Results showed that water contact angles of mixed SAMs were similar to those of pure SAMs. The morphology of coating surface was roughened as mixing of SAM. Nano adhesion and nano friction decreased as increasing of the spacer chain length and mixing of SAM. Micro friction was decreased as increasing of the spacer chain length, but micro friction of mixed SAM showed the value between pure SAMs. Nano adhesion and friction mechanism of mixed SAM was proposed in a view of stiffness of spacer chain modified chemically and topographically.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.56-63
• /
• 2003

Micro/nano adhesion and friction properties of mixed self-assembled monolayer (SAM) with different chain length for MEMS application were experimentally studied. Many kinds of SAM having different spacer chains(C6, C10 and C18) and their mixtures (1:1) were deposited onto Si-wafer, where the deposited SAM resulted in the hydrophobic nature. The adhesion and friction properties between tip and SAM surfaces under nano scale applied load were measured using an atomic force microscope (AFM) and micro scale applied load were measured using ball-on-flat type micro-tribotester. Surface roughness and water wetting angles were measured with SPM (scanning probe microscope) and contact anglemeter. Results showed that wetting angles of mixed SAMs showed the similar value of pure SAMs. The coating surface morphology was increased as mixing of SAM. Nano adhesion and nano friction decreased as increasing of the spacer chain length and mixing of SAM. Micro friction was decreased as increasing of the spacer chain, but micro friction of mixed SAM showed the value between pure SAMs. Nano adhesion and friction mechanism of mixed SAM was proposed in a view of stiffness of spacer chain modified chemically and topographically.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.378-384
• /
• 2019

Ice accumulation on Aluminum Conductor Steel Reinforced(ACSR) cable during winter is an important matter in terms of safety, economy, and efficient power supply. In this work, the ice adhesion strengths of ACSR cable oxidized during different periods(7 years oxidized and 15 years oxidized) are evaluated. At first, a plate type dry oxidation standard specimen, whose surface characteristics are similar to those of ACSR cable, is prepared. Dry oxidation standard specimens are heat-treated at $500^{\circ}C$ for 20, 60, and 120 minutes in order to obtain different degrees of oxidation. After the dry oxidation, surface properties are analyzed using contact angle analyzer, atomic force microscopy, spectrophotometer, and gloss meter. The ice adhesion strengths are measured using an ice pull-off tester. Correlations between the surface properties and the ice adhesion strength are obtained through a regression analysis indicating a Boltzmann equation. It is revealed that the ice adhesion strength of 15-year oxidized ACSR cable is approximately 8 times higher than that of ACSR-bare.

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.92-97
• /
• 2019

추진제, 라이너 그리고 내열재간의 접착력을 향상시키기 위한 연구를 수행하였다. 내열재에 아무런 처리하지 않은(Bare) 상태보다는 피막처리제를 적용한 것이 접착력 향상에 유리하였다. 라이너 도포 두께가 증가할수록 내열재와 추진제간의 접착력이 향상되는 것을 확인하였으며, 라이너 경화는 24시간 경화 시간이 필요하며, 그 이상의 과경화는 접착력에 불리한 영향을 끼친다. 또한 결합제를 적용할 때가 적용하지 않을 때보다 접착력에 유리하다는 것을 알 수 있었으며, 결합제 함량이 증가할수 록 접착력도 상승하였다. 결합제 종류에 따른 접착력 변화는 HX-868이 HX-752보다 접착력이 소폭 향상되었다.

• Animal cells and systems
• /
• 제8권3호
• /
• pp.155-163
• /
• 2004

Tenuidraconema koreensis, a new species of free-living marine nematodes, collected from the subtidal coarse sediments and various invertebrates of Namae, is described. The new species differs from T. fiersi Decraemer, 1989, the only other species in the genus, by having the combination of the following characters: the position of twelve cephalic adhesion tubes in both sexes (anterior six cephalic adhesion tubes inserted on the rostrum and posterior six inserted on the body annules), and the number of posterior sublateral adhesion tubes (12 in male and 13 in female) and posterior subventral adhesion tubes (15 in male and 19 in female). This paper contains the description of the new species with illustrations and scanning electron microscope (SEM) photomicrographs. This is the first discovery of the monotypic genus Tenuidraconema outside the type locality.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.357-362
• /
• 1997

The purpose of this study is to evaluate the adhesion of concrete pipe lining using polymer mortar. The polymer mortars with various mix proportions are prepared, and tested for flexural and compressive strengths, adhesion in tension, and the aspects of lining surface and workability are evaluated. Form the test results, it is apparent that the appropriate polymer mortars of lining to concrete pipe can be produced. The flexural and compressive strengths of polymer mortar for lining are affected by type of resin, and aggregates content, and water content at the surface of concrete pipe is important factor for improvement in adhesion of polymer mortar. It is obvious that the economical polymer mortars having an excellent cost performance ration can be produced through this study.

• KSTLE International Journal
• /
• 제9권1_2호
• /
• pp.31-35
• /
• 2008

DLC (Diamond Like Carbon) films have predominant tribological properties like a high hardness, low friction and high chemical resistance; therefore, DLC films are applied in a wide range of industrial fields. This paper evaluated the characteristics of DLC films deposited on bearing steel with different hardness by RF-PECVD (Radio Frequency - Plasma Enhanced Chemical Vapor Deposition) method. Si-interlayer was deposited on bearing steel to improve adhesion strength by RF-Sputtering method. The DLC film structures were analyzed with Raman spectra and Gaussian function. Adhesion strength of DLC films was measured with a scratch tester. Friction and wear test were carried out with a ball-on -disc type to investigate the tribological characteristics. Experimental results showed that DLC films deposited on bearing steel under same deposition condition have typical structure DLC films regardless of hardness of bearing steel. Adhesion strength of DLC film is increased with a hardness of bearing steel. Friction coefficient of DLC film showed lower at the high hardness of bearing steel.

• 한국표면공학회지
• /
• 제22권1호
• /
• pp.17-25
• /
• 1989

The structural Charactesties and adhesion of chemically vapor deposited TiN film on stain less steels have been investated as functions of deposition temperature, surface roughness of sub state, and types of substrates. The grain zine and the lattice parameter of TiN film decreased with decreasing roughness of substates. The(200) preferred orientation was developed dominatly and the lattlice parameter decreased as temperature intereased reardless of the surdless roughnessand type of the substrates used. The surface morphology of TiN film changed from bushed crystal to a plate and then to pyamidal dense crystals with an increase in the deposition temperature. The adhesion of TiN films increased with coating thinkness and decreased with surface roughness in general. The calculations using a Bejamin & Weaver's model have been compard. Maximum valuse of adhesion energy calculated using Laguier's model were W304=331Jm-2,w410=113Jm-2,andW430=107jm-2