• 접착 및 계면
• /
• 제12권2호
• /
• pp.67-72
• /
• 2011

Acrylic pressure-sensitive adhesives are used in many different parts in the world. But acrylic acid in PSAs may occur unexpected results such as corroding adherends or producing by-products when applied within electronic devices. This study employed acrylic PSAs based on 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA) and butyl acrylate (BA) with different coating thickness. There are two types of curing agents. One is methylaziridine derivative (MAZ) and the other is aluminum acetylacetonate (AlACA). This study examined the adhesion performance and curing behaviors using peel strength, probe tack and gel fraction. Also, the viscoelastic properties of acrylic PSAs were investigated from Advanced rheometric expansion system (ARES).

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.316-326
• /
• 1993

Adhesion and hardeness are the most important properties of a hard coated layer which is applied to wear-resistant devices. Zr/ZrN layer was deposited on tool steel(SKH9) and stainless steel(SUS304) by a re-active D.C. magnetron sputtering technique and their microhardness and adhesion strength were measured for the films processed by changing the partial pressures of $N_2$ gas (4~10$\times$$10^{-4}$mbar) and the substrate bias voltage(0~250V). The adhesion strength was evaluated by acoustic signals through the scratch-test with the incremental applied load. As the partial pressure of $N_2$ gas and the substrate bias voltage were increased, the adhesion strength of tool steel was observed to be stronger than that of the stainless steel. The adhesion strength was generally, observed to decrease with the same tendency regardless of the kinds of substrates. The adhesion strength of tool steel was increased more and more strongly than that of stainless steel as heat-treated temperature was increased. The strength of tool steel was appeared to be high adhesion strength at $400^{\circ}C$. From the failure mode of the film during the scratch adhesion test, the cohesive failure was observed to be obvious and the adhesive failure in a minor portion in the Zr/ZrN doublelayer regardless of the kinds of substrates.

• 전기화학회지
• /
• 제21권2호
• /
• pp.28-38
• /
• 2018

복합전극의 결착특성은 리튬이차전지의 장기신뢰성 확보와 고에너지밀도 구현을 위한 중요한 물성임에도 불구하고, 측정 기술의 한계로 관련 연구가 제한적이었다. 하지만, $1{\sim}1000{\mu}m$ 두께의 코팅층을 절삭 및 박리하면서 결착특성을 측정할 수 있는 SAICAS(Surface And Interfacial Cutting Analysis System)란 장비의 출현으로 전극 결착특성 연구가 활발해지고 있다. 따라서, 본 총설에서는 SAICAS를 이용한 복합전극의 결착특성 분석 원리 및 측정 방법뿐만 아니라, Peel Test와 같은 기존 결착특성 분석 방법과 비교함으로써 SAICAS를 이용한 분석 방법의 신뢰성 검증 결과를 제시한다. 또한, 전극 설계의 최적화, 신규 바인더 도출 연구, 복합전극 내 바인더 분포 등의 연구에서 SAICAS가 적용된 사례를 소개한다. 이를 통해 SAICAS를 이용한 분석 방법이 리튬이차전지용 복합전극의 결착특성 분석에 용이하게 적용될 수 있음을 제안한다.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.81-87
• /
• 2011

본 연구에서는 자동차 조립공정에 적용 할 수 있는 아크릴폼테이프를 합성하기 위하여 UV 중합 및 가교 공정을 도입하였다. 중합된 점착제를 폼에 합지하고 폼의 두께를 변화시켜 가며 시험편을 제조하였다. 기본물성을 측정하기 위해 stainless steel 표면에서의 강도를 측정하였으며 이때 peel, dynamic shear and t-block을 사용하였다. 일반적인 점착제에 비해 우수한 결과를 보여 주었으며 외부 요인 - 두께, 젖음시간 - 등에 의해 물성이 크게 변화하는 것을 확인 할 수 있었다. 본 연구에 활용된 아크릴폼점착제의 자동차 공정 활용성을 평가하기 위해 다양한 플라스틱 피착제에서 물성 측정을 진행하였다. 저표면에너지그룹으로 분류되는 PP와 PE에서는 그 물성이 전혀 발현되지 못했으나 기작 차이에 의해 dynamic shear 시험에서는 일부 물성이 발현됨을 확인 할 수 있었다.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.77-85
• /
• 2017

The interfacial adhesion between fiber and matrix affects the physical properties of fiber reinforced composites. In this study, 3-(Methacryloyloxy)propyltrimethoxy silane(MPS) coupling agent was used to increase the interfacial adhesion between polyketone fiber and epoxy resin. The change of surface chemical composition of polyketone fiber treated with MPS was analyzed using a FTIR-ATR. The interfacial bonding between fiber and resin increased with silane coupling agent largely. Consequently, interfacial shear strength(IFSS) was enhanced with increasing concentration of MPS coupling agent and thus, the physical properties of the composites such as flexural properties and dynamic mechanical properties were changed. Flexural strength and modulus increased when the MPS concentration was higher than 0.5wt%. The dynamic storage modulus of Polyketone/Epoxy composites treated with MPS was higher than that of the untreated one. When the MPS concentration of 3wt%, the highest storage modulus was obtained.

• 비파괴검사학회지
• /
• 제36권3호
• /
• pp.188-194
• /
• 2016

본 연구에서는 Pt/Ti 박막과 기판 사이 계면의 접합특성을 비파괴적으로 평가하는 acousto-optic 기법을 제안한다. 현재 상용화된 기술만으로 마이크로/나노 스케일의 박막을 평가하는데 많은 어려움이 있기 때문에 미세구조 변화에 민감한 광학기술과 음향기술이 결합된 간섭계를 적용하여 연구를 수행하였다. 사용한 기법은 마이켈슨 간섭계를 기반으로 하며, 거울에 의한 광 경로차 대신 박막시험편 계면의 진동 영향에 따라 발생하는 간섭현상을 분석하였다. 박막시험편은 특정 주파수에서 공진과 유사한 현상을 보이고 이로 인해 프린지 패턴의 콘트라스트가 낮아지므로, 각 주파수 대역별 프린지 패턴 변화를 스펙트럼 결과로 정량화하여 제안된 기법을 이용한 박막의 접합특성 평가 가능성을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.545-548
• /
• 2003

The purpose of this study is measures vulcanization properties of matter by time of room temperature vulcanization synthetic rubber sheet and the evaluation adhesive properties tested by concrete surface moisture. Also, Its estimated reaction mechanism and adhesion performance between protection mortar and waterproofing layer. The results showed that vulcanization progressed in room temperature and adhesion intensity increased regardless of moisture condition.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.40-43
• /
• 1999

Electrochemical surface treatment of PAN-based carbon fibers in acidic electrolyte has been studied in increasing the surface functional groups on fiber surfaces for the improvement of fiber-matrix adhesion of the resulting composites. According to the FT-IR and XPS measurements, it reveals that the oxygen functional groups on fibers are largely influence on the composite mechanical behaviors, whereas the nitrogen functional groups are not affected in the system. In this work, a good correlation between surface functionality and mechanical properties is established.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.190-195
• /
• 2011

Diamond-like carbon (DLC) has many outstanding properties such as low friction, high wear resistance and corrosion resistance. However, it is difficult to achieve enough adhesion on the metal substrates because of weak bonding between DLC film and the metal substrate. The purpose of this study is to enhance an adhesion of DLC film. For improving adhesion, the substrate was treated by active screen plasma nitriding before DLC film deposing. Nitrided substrates were investigated by Glow Discharge Spectrometer (GDS), Micro-Vickers Hardness. DLC films were deposited on several metals by linear ion source, and characteristics of the films were investigated using nano-indentation, Field Emission Scanning Electron Microscope (FESEM). The adhesion was measured by scratch tester. The adhesion of DLC films was increased when nitriding layer was formed before DLC deposition. Therefore, the adhesion of DLC film can be enhanced as increasing the hardness of materials.

• 접착 및 계면
• /
• 제5권4호
• /
• pp.1-8
• /
• 2004

다이싱 테이프에 사용되는 UV경화형 점착제를 아크릴 공중합체를 butyl acrylate, acrylic acid, methyl methacrylate를 용액 중합을 통해 중합한 뒤, trimethylolpropane triacrylate를 블렌딩하여 제조하였다. 제조된 점착제는 UV 조사량에 따라 접착력, 유리전이온도 ($T_g$)를 측정하였는데 UV 조사량이 증가할수록 접착력은 급격하게 감소하였고 $T_g$도 증가하였다. 웨이퍼 표면에 점착 샘플을 부착하여 UV 조사 후 박리하여 표면을 관찰한 결과 점착잔류물을 남기지 않았다.