• 폴리머
• /
• 제37권3호
• /
• pp.373-378
• /
• 2013

폴리카보네이트(PC) 필름을 유연기판으로 사용하기 위해서는 $SiO_x$ 증착에 의한 베리어 특성 개선이 필요하며 이때 베리어 층과 PC 계면 접착력이 매우 중요하다. 본 연구에서는 언더 코팅, UV/$O_3$ 및 저온 플라즈마와 같은 다양한 표면 처리 방법에 의하여 PC 필름 표면을 개질하여 표면의 물리적 화학적 변화가 증착된 베리어 층 계면 접착력에 미치는 영향을 살펴보았다. 표면 처리 전의 PC 필름은 표면 거칠기 및 표면 에너지가 매우 낮아 $SiO_x$ 베리어 층과의 접착력이 현저히 떨어짐을 알 수 있었다. PC 필름을 저온 플라즈마로 표면 처리한 결과, 표면의 거칠기 증가와 극성 관능기 생성에 의하여 극성 표면 에너지가 향상되는 반면 UV/$O_3$ 처리의 경우, 표면 거칠기 변화 없이 표면에 생성된 극성 관능기에 의해 극성 표면 에너지가 증가됨을 알 수 있었다. 이러한 표면의 변화는 베리어층과 PC 기판의 계면 접착력 증가에 기여함을 알 수 있었다. 표면 처리 방법으로 언더 코팅을 사용하는 경우 표면에 에너지를 가하지 않아도 코팅제의 아크릴산과 $SiO_x$의 접착력 향상에 의하여 PC 필름과의 계면 접착력이 증가되며 유무기 하이브리드 다층 구조에 의한 베리어 특성 개선이 함께 일어남을 알 수 있었다.

• 접착 및 계면
• /
• 제11권1호
• /
• pp.26-34
• /
• 2010

가열에 의해 해체가 가능한 열적특성을 갖는 폴리우레탄 접착제를 합성하였으며 열팽창비드를 혼합하여 해체성 접착제를 제조하였다. Dynamic mechanical thermal analyzer (DMA)를 사용하여 폴리우레탄의 열적특성을 확인하였고 접착강도와 열팽창비드의 함량, 가열 trigger의 종류와 처리조건에 따른 해체특성을 연구하였다. 열풍과 microwave 처리에 의해서 해체성 폴리우레탄 접착제의 부피팽창에 따른 접착된 시편의 해체가 가능하였으며, 열팽창비드의 함량이 증가될수록 접착된 피착재가 더 쉽게 분리되었다. 해체성 접착제에서 접착력과 해체특성 모두를 만족시킬 수 있는 가장 적합한 열팽창비드 사용량은 40%이였으며, 가열 trigger로 열풍을 사용한 경우에는 $160^{\circ}C$, 30 min의 조건에서, 가열 trigger로 microwave를 사용한 경우에는 조사시간 4 min의 조건에서 접착되어 있는 피착재가 완전히 해체되었다.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.79-86
• /
• 2012

The aim of this general remarks is to introduce the results concerning the thermo physical, charging, developing and fusing characteristics of micro-encapsulated (MC) model toners in order to apply to the toner of electrophotographic system at the condition of a low temperature. In order to clarify the fusing mechanism of MC toner, rheological analysis of the toner was chosen. It was suggested that MC toner had a different fusing mechanism compared with non-MC toner. Some kinds of MC model toners showed a good result on adhesion test as well as cohesion test. Also, it was possible to get the good charging and development characteristic of MC toner for printing test with laser printer.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.295-302
• /
• 2017

Polyurethane dispersion (PUD) polymers were synthesized by using polyether and polyester polyol. The effect of ionomeric centers, r(NCO / OH) values, chain extender process, and chain extender types on the adhesion properties was investigated. In the case of polyether-based PUD, the ionic center, r value, chain extension process and chain extender types were not adjusted even after adjustment. In the case of polyester-based PUD, when the ionic center content was more than 2.5%, the state of adhesive strength was $2.0kgf/cm^2$ or more. On the other hand, the initial adhesive strength was excellent at about $1kgf/cm^2$ when the ionic center content was over 3.5%. When the r value was 1.3 or more, it was found that the initial bonding strength and the state of bonding strength were excellent at about $1kgf/cm^2$ and $2.1kgf/cm^2$ or higher, respectively. An IR spectrum analysis of the synthesized PUD confirmed that PUD was composed of urethane based on the N-H characteristic peak at $3340cm^{-1}$ and the urethane characteristic peak at $1730cm^{-1}$. Moreover, the characteristic peaks of the isocyanate ($2260cm^{-1}$) used in the preparation of the prepolymer were not observed. As a result, the residual -NCO was not observed, and urethane was completely synthesized.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1164-1169
• /
• 2014

Recently, an interest in a hybrid system combining only the merits of the conventional wheel-rail system and Maglev propulsion system is growing as an alternative to high-speed maglev train. This hybrid-type system is based on wheel-rail method, but it enables to overcome the speed limitation by adhesion because it is operated by a non-contact method using a linear motor as a propulsion system and reduce the overall construction costs by its compatibility with the conventional railway systems. Therefore, the design and characteristic analysis of a coreless-type superconducting Linear Synchronous Motor (LSM) for 600km/h very high speed railway system are conducted in this paper. The designed coreless-type superconducting LSMs are the distributed winding model, the concentrated 1 layer winding model and the concentrated 2 layer winding model, respectively. In addition, the characteristic comparison studies on each LSM are conducted.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.391-400
• /
• 1997

Using the soil bin systems, this study was carried out to investigate the tilling load characteristic for the three kinds of Japanese rotary blade and the possibility of common use for power tiller and tractor rotary. The results obtained from the study are summarized as follows : 1. At all tested soils. the average and maximum tilling torque of all tested blades increased as the tillage pitch did. 2. The torque requirements of newly designed and produced blade was less than that of blade which has been used on power tiller and tractor rotary. 3. The maximum tilling torque of new ONE were decreased 7%, 10~11％, 27% in comparing with another blades at clay loam, loam and sandy loam, respectively. 4. According to observation of the extent of soil adhesion on blade and the contact aspect of blade, new ONE is the most excellent of all tested rotary blades and till smoothly not to compress the untilled soil. From the results of this study. the newly developed blade(new ONE) proved to be good tilling load performance and had a conclusion that it is possible to use it on power tiller and tractor rotary in common.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.53-60
• /
• 2010

The natural soils are classified in saturated soils and unsaturated soils according to level of ground water but the research for only saturated soils has been conducted by this time. However, there are many proble.ms which are not solved by using the concept and principle of saturated soils on the natural soils. In fact, it is known that unsaturated soils represent the behavior characteristic unlike completely saturated soils because of the adhesion under the influence of negative pore water pressure, the high angle of friction and the low water permeability by the air entry. So it needs to conduct the various researches on insufficient unsaturated soils. In this paper, unsaturated triaxial compressive tests are conducted in order to do research on shear strength characteristic on sands and silty sands of Nakdong river. As a result of the tests, the cohesion is increased in non-linear type according to the change of the matric suction, but the angle of internal friction is not changed much.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.13-16
• /
• 2003

Adhesion of $SrZrO_3$ resistive oxide barrier on Ag sheathed Bi(2223) tapes prepared by the sol-gel and dip-coating method was evaluated with an aid of Taguchi method and Lie($2^1{\times}3^7$) orthogonal arrays to determine the optimal process combination of levels of factors that best satisfy the bigger is better quality characteristic (QC=B). For analyses of results statistical calculations such as average and analysis of variance (ANOVA) were employed to analyze the results for improving the performance qualities of the dip-coated $SrZrO_3$ film. Experimentally, the performance of the films was evaluated in terms of bond strength by varying Sr/Zr moi ratio (A), amount of organic vehicle additives (B), drying temperature (C) and time (D), heat treatment temperature (E) and time (F), respectively. The optimal combination of levels of factors was determined to be $A_3B_2C_3D_2E_1F_3$ having a 90% confidence level.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.660-664
• /
• 2008

Titanium nitride (TiN) thin films are widely used for hard coatings due to their superior hardness, chemical stability, low friction and good adhesion properties. In this study, we investigated the effect of DC power on the characteristics of TiN thin films deposited on Si and glass substrates by DC magnetron sputtering using TiN target. We made TiN films of 300 nm thickness with various DC powers. The structural properties of films are investigated by x-ray diffractions (XRD) and tribological properties are measured by nano-indentation, nano-scratch tester. The rms roughness was measured by atomic forced microscopy (AFM). In the result, TiN films had the smooth surface and exhibited (111) directions with the increase of DC Power. Also, especially in case of 175 W DC power, TiN film exhibited the maximum hardness about 8 GPa, and the critical load near 25.

• 열처리공학회지
• /
• 제32권5호
• /
• pp.224-229
• /
• 2019

PVD coating is a technology that can be applied to various industries, and is widely used for processing molds and machinery, improving performance of core parts, and extending the life. Therefore, there is a need for a research on a device and a process technology that can adjust the performance to suit each application. In this study, a PVD coating device with ion density control was used to deposit a coating layer on SKD 11, a cold die steel, with magnetron currents of 1 A, 2 A, 3 A at arc currents of 80 A, 100 A, 130 A. It examined the mechanical properties for each condition. Increasing the arc current and magnetron current could improve the thickness, adhesion, and hardness of the coating layer. Especially, When the magnetron current was high, it suppressed the droplets that could be generated by the high arc current, showing excellent surface uniformity and adhesion of the coating layer.