• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.853-857
• /
• 2013

We design, develope and test a parallel active polymer pen lithography (PPL) device, which consists of individually addressable elastomeric probe tips. The PPL array chip is fabricated using soft lithography method with polydimethylsiloxane (PDMS) material. Individual probe can be pneumatically actuated via a computer controlled interface. We demonstrate parallel writing with 16 individually addressed pens, with each pen producing a different pattern in the same run. The largest proof-of-concept array fabricated is $4{\times}4$ with a spacing of $250{\mu}m$ in both x and y axes.

• 전자공학회논문지C
• /
• 제35C권4호
• /
• pp.60-68
• /
• 1998

In this paper, content addressable momory(CAM) using neural network algorithm is proposed to decrease cell loss and process the large amount of data in streaming mode connectionless server at high speed. To overcome problems of area and power dissipation in look-up table using conventional CAM, the proposed neural network CAM is designed to increase linearly address storage bit about increase of address input bit. Its design and imulation is performed by using VHDL and Compass Tool. Also, its layout is performed by using chip compiler, cell-base P&R tool of compass, in 0.8 .mu.m design rule environment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1002-1006
• /
• 2006

Temperature monitoring techniques per depth have been recognized as important information in the reservoir environmental issues. However, old measurement method by single temperature sensor and cable type has demerits not only for its limited measuring location but for its inconvenience of users. In this study, multi-channel temperature monitoring system was introduced and executed experiment for actual application feasibility evaluation. Both type of new techniques such as multi-channel addressable built-in temperature sensor and fiber optic multi sensor were tested in Daechung and Imha reservoir. As a result, it was proved that these kinds of temperature monitoring skills had very good performance and availability for a output of spatial, simultaneous thermal distribution focused on the user's convenience. And these measuring method and thermal data will be useful for providing basic information in a water resources investigation like reservoir stratification and environmental problems.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.1056-1063
• /
• 1994

본 논문에서는 연상 메모리 소자에 대한 데이터와의 병렬 처리 최적 정합 방식을 적용하여 계산 효율과 처리율을 높인 단일 PE 아키텍쳐를 이용하여 CAM을 설계하였다. 설계한 CAM은 크게 3개의 기능 블록(입력 MUX, 최적 정합 CAM, 제어부)으로 구성되어 있다. 데이터 처리는 병렬 입력 및 병렬 비교를 하여 고속으로 데이터를 처리하는 전.병렬 방식을 채택하였다. 이러한 특성을 갖는 CAM은 회로 및 논리 시뮬레이션을 통하여 ETRI 3 m-well 공정 설계 규칙을 사용하여 설계하였다. 본 논문에서 설계된 CAM의 최대 동작 주파수는 20MHz이다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.17-21
• /
• 2004

본 논문에서는 실시간으로 상수 및 변수의 병렬 매칭이 가능한 새로운 구조의 하드웨어 기반 룰-베이스시스템 구조를 제안한다. 이 시스템은 context-aware computing 시스템에서 상황 인식을 위한 기법으로 적용될 수 있다. 제안된 구조는 기존의 하드웨어 기반의 구조가 가지는 룰의 표현 및 룰의 구성에서 발생하는 제약을 상당히 감소시킬 수 있다. 이를 위해 변형된 형태의 content addressable memory(CAM)와 crossbar switch network(CSN)가 사용되었다. 변형된 형태의 CAM으로 구성된 지식-베이스는 동적으로 데이터의 추가 및 삭제가 가능하다. 또한 CSN은 input buffer와 working memory(WM) 사이에 위치하여, 시스템 외부 및 내부에서 동적으로 생성되거나, 시스템 설정에 의해 지정된 데이터들의 조합 및 pre-processing module(PPM)을 이용한 연산을 통하여 WM을 구성하는 데이터를 생성시킨다. 이 하드웨어 룰-베이스 시스템은 SystemC 2.0을 이용하여 설계하였으며 시뮬레이션을 통하여 그 동작을 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.205-208
• /
• 2002

An existing ATM switch fabric uses VPI(Virtual Path Identifier) and VCI(Virtual Channel Identifier) information to route ATM cell. But AAL type 2 switch which efficiently processes delay-sensitive, low bit-rate data such as a voice routes the ATM cell by using CID(Channel Identification) field in addition to VPI and VCI. In this paper, we research the AAL type 2 switch that performs the process of CPS packet. The Receive unit extracts the CPS packet from the inputted ATM cell. The designed receive unit consists of input FIFO, r)( status table, CAM(Content Addressable Memory), new CID table and partial packet memory. Also the designed receive unit supports the PCI interface with host processor. The receive unit is implemented in Xilinx FPGA and operates at 72MHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.259-262
• /
• 2003

A efficient P2P (peer to peer) networking for sharing multimedia contents is proposed to overcome the limitations of unstructured approaches. The proposed approach is attempting to organize the participating P2P nodes by modifying a n-dimensional cartesian-coordinate space DHT (distributed hash table), CAN (content addressable network). The network identifiers (e.g., network prefix of IP address) of participating nodes are mapped into the CAN virtual coordinate space (in 2-d) and nodes with similar identifiers are grouped into the same zone. The proposed scheme is expected to show some level of concentration reflecting the network identifiers. Network simulator-based evaluation is performed to verify the effectiveness of the proposed scheme.

• 전자공학회논문지B
• /
• 제32B권8호
• /
• pp.1057-1063
• /
• 1995

This paper describes an approach for constucting a Rectilinear Steiner Tree (RST) derivable from a Minimum Spanning Tree (MST), using Associative Processor (AP). We propose a fast parallel algorithm using AP's basic algorithms which can be realized by the processing capability of rudimentary logic and the selective matching capability of Content- Addressable Memory (CAM). The main idea behind the proposed algorithm is to maximize the overlaps between the consecutive edges in MST, thus minimizing the cost of a RST. An efficient parallel linear algorithm with O(n) complexity to construct a RST is proposed using an algorithm to find a MST, where n is the number of nodes. A node insertion method is introduced to allow the Z-type layout. The routing process which only depends on the neighbor edges and the no-rerouting strategy both help to speed up finding a RST.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 추계학술논문발표회 논문집
• /
• pp.518-521
• /
• 2011

본 논문에서는 화재 및 비화재보시 동작감지기의 정확한 위치전송이 가능하고, 화재 시 동일 회로상(Loop)의 모든 감지기가 본연의 기능을 수행할 수 있는 주소형 감지기 및 화재 시 정확한 위치확인 및 연동된 설비들의 출력상황이 확인 가능한 임베디드 내장형 주소형 수신기를 개발하였다.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.