• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2825-2827
• /
• 2014

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.53.2-53
• /
• 2000

• 환경위생공학
• /
• 제12권1호
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• 대한화학회지
• /
• 제57권5호
• /
• pp.591-598
• /
• 2013

A series of chiral prolinamide compounds with pyridine-2, 6-dicarboxylic acid moieties derived from L-proline have been designed and synthesized, their catalytic properties for direct asymmetric aldol reactions were also studied in this article. These catalysts gave the aldol product in high yield (87%) and high enantioselectivity, up to 85%, of the anti-structure at room temperature but gave disappointing results at a lower temperature or when additive was added. Conditions, including solvents, temperature and additives were screened for the reactions. Moreover, the influence of presence of water on yield and stereoselectivity was also discussed.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.108-117
• /
• 2003

WC and dense WC-10 vol%Co materials with grain size of~1${\mu}m$ were synthesized by high-frequency induction heated combustion synthesis (HFIHCS) method in one step from elemental powders of W, C and Co within several minutes. Simultaneous combustion synthesis and densification were accomplished under the combined effects of an induced current and mechanical pressure. In the absence of cobalt additive, WC can be formed, but its relative density was low (about 73%) under simultaneous application of a 60 MPa pressure and the induced current. However, in the presence of 10 vol.%Co, the relative density increased to 99% under the same experimental condition. The percentages of the total shrinkage occurring before and during the synthesis reaction of WC-10 vol.%Co were 5% and 51%, respectively. The fracture toughness and hardness values of WC-10 vol.%Co were 10 MPa . m$^{1/2}$ and 1840 kg/$mm^2$, respectively.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.104-111
• /
• 2013

In this study, GaN powders were synthesized from gallium oxide-hydroxide (GaOOH) through an ammonification process in an $NH_3$ flow with the variation of $B_2O_3$ additives within a temperature range of $300-1050^{\circ}C$. The additive effect of $B_2O_3$ on the hexagonal phase GaN powder synthesis route was examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transformation infrared transmission (FTIR) spectroscopy. With increasing the mol% of $B_2O_3$ additive in the GaOOH precursor powder, the transition temperature and the activation energy for GaN powder formation increased while the GaN synthesis limit-time ($t_c$) shortened. The XPS results showed that Boron compounds of $B_2O_3$ and BN coexisted in the synthesized GaN powders. From the FTIR spectra, we were able to confirm that the GaN powder consisted of an amorphous or cubic phase $B_2O_3$ due to bond formation between B and O and the amorphous phase BN due to B-N bonds. The GaN powder synthesized from GaOOH and $B_2O_3$ mixed powder by an ammonification route through ${\beta}-Ga_2O_3$ intermediate state. During the ammonification process, boron compounds of $B_2O_3$ and BN coated ${\beta}-Ga_2O_3$ and GaN particles limited further nitridation processes.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.303-308
• /
• 2018

본 연구에서는 리튬이차전지 음극활물질인 Silicon/Carbon (Si/C) 복합소재를 제조하여 바인더 및 첨가제가 전지성능에 미치는 영향을 조사하였다. Si/C 합성물은 마그네슘의 열 환원 반응을 통해 SBA-15 (Santa Barbara Amorphous material No. 15)를 제조한 후 페놀 수지의 탄화 과정을 통해 합성하였다. Si/C 음극소재는 충 방전, 순환전압전류, 임피던스 테스트를 통해 전기화학적 성능을 분석하였다. PAA 바인더를 이용한 Si/C 전지의 용량은 1,899 mAh/g으로 다른 바인더를 사용한 합성물보다 우수하였으며, 40 사이클 동안 92%에 달하는 높은 용량 보존율을 나타내었다. 또한, VC 첨가제를 사용한 전지의 경우 3,049 mAh/g의 높은 초기용량을 나타내며, 실리콘 표면에 보호막을 형성해 초기 비가역용량을 감소시켜줌을 알 수 있었다.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2019

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

• 공업화학
• /
• 제17권5호
• /
• pp.498-503
• /
• 2006

윤활유 첨가제 중간체로서 Alkenyl Succinic Anhydride (ASA)계열인 i-(2',5'-diketotetrahydrofuranyl)octadacenyl acid (OSA)를 oleic acid (OA)와 maleic anhydride (MA)의 ene-reaction을 통하여 합성하였다. 이 반응의 진행과정은 GC분석을 통해 관찰함으로써 확인하였다. 숙신이미드 화합물은 알킬아민과 OSA와의 반응에 의해 합성되었다. 이 숙신이미드 화합물들은 윤활유 첨가제로서 항유화성, 내마모성, 방청성능 등을 시험하였으며, 이때 상대적으로 긴 알킬사슬을 가진 octadecylamine 유도체가 우수한 물성을 나타내었다.

• 식품과학과 산업
• /
• 제49권4호
• /
• pp.82-93
• /
• 2016

Although the development of food technology is relatively fast, it's application is very broad. So, it is necessary that quantitative analysis method can be introduced in analysing of research trends and implication of research themes. Most countries do not classify in food additives as synthesis or natural. However, the use of natural food additives should be recommended by considering about health safety. In this regard, quantitative analysis based on bibliographic information of patents and papers is vital to analyse the trend of research on natural food additives. The data regarding with natural food additives was assigned patents and published papers in the world from 1996 to March 2016 and Thomson Innovation, analysis program was provided by Thomson reuters.