• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.588-593
• /
• 2012

Nowadays, various forms of electro-optical rifle scope have been developed and used in order to enhance the accuracy of small arms. However, firing shock acceleration has characteristics of pyroshock having a big acceleration value with very short duration time, which the electro-optical scopes should be designed to sustain. In this paper, the firing shock acceleration, which is transmitted to the electro-optical scope, was measured and SRS (Shock Response Spectrum) analysis was performed by using the measured firing shock acceleration. Furthermore, a shock test condition using a drop-table shock tester, which can simulate the actual firing shock acceleration, was devised. The devised shock test condition will be utilized to test the electro-optical scope itself before attaching it to the small arms.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.289-290
• /
• 2009

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.334-335
• /
• 2003

현재 기지국과 중계기 사이의 광선로에 사용되고 있는 1310 nm와 1550 nm 파장이외에 OADM (optical add-drop multiplexer)을 사용하여 새로운 2개 파장을 광선로에 추가로 연결함으로써 광선로 임차사용의 효율을 증대시키는 4파장 광중계기의 구현시 drop신호는 삽입손실 ­3 dB 이하의 저손실특성이 요구되며 isolation 신호는 통상 ­40 dB 이상의 고품질이 요구된다. 그러나 이와같은 성능의 광모듈을 실제로 구현하기 어렵다. 따라서 많은 광결합 부품의 조합을 통해서도 drop또는 isolation 특성은 4파장 광중계기를 실용화하기 어려울 만큼 저하된다. (중략)

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2958-2968
• /
• 2000

To effectively supervise WDM systems requires that the alarm signals for each optical transport network layer is considered. The related recommendations and studies for alarm signals are defining fundamental functions without specifying the structure and configuration of the supervisory channel. In this paper, we propose the detailed alarm signals and propagation flows for each optical transport network layer. We also describe the structure of overhead and the configuration of supervisory channel. Our proposals are based on the ITU T requirements of optical transport network and the supervisory schemes of terminal & add-drop systems. We show that our proposed schemes effectively performs supervisory functions for various fault conditions which will occur in terminal & add-drop typed WDM systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1117-1120
• /
• 2003

DWDM(DensedWavelengthDivisionMultiplexing)은 광 파이버를 이용하여 기존의 통신보다 높은 대역폭(B/W)을 얻기 위한 기술로 여러 신호를 각각 다른 파장으로 변조해 하나의 Fiber 를 통해 전송하는 방식이며, 기본적으로 EDFA(Erbium Doped Fiber Amplifier), AWG(Arrayed Wave guide Grating), OADM(Optical Add/Drop Multiplexer) 등의 주요 부품과 여러 광 관련 부품들로 구성돼 있으며, 다수의 파장을 MUX(AWG)에서 다중화하고, 장거리 전송을 위해 OA(EDFA)에서 광신호를 증폭하게 된다 그리고 일부 특정 파장만 Add/Drop하기 위해 OADM이 놓이게 되며, 또한 선로(광섬유)의 손실을 보상하기 위해 필요한 구간에 리피터(EDFA)를 두어 광신호를 증폭 송신하며 수신단에서는 들어오는 여러 파장을 OA(EDFA)를 통해 증폭한 후 DEMUX(AWG)에서 역 다중화해 수신하게 된다. 이와 같은 DWDM방식을 이용한 Network는 Star, Mesh, Ring 등의 다양한 형태로 구성될 수 있으며, 초기에는 Point-to-Point 방식의 장거리 전송에 주로 사용돼 왔으나 Metro 구간의 Traffic 이 급격히 증가하면서 Metro- DWDM Network 이 부각되고 있어 본 논문에서는 현재 SK Telecom에서 상용화되고 있는 1,600G DWDM과 Metro-DWDM간의 망 구축의 최적화 방안을 연구해 본다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.106-112
• /
• 1997

We demonstrate a novel wavelength -division add/drop multiplexer employing fiber bragg gratings and polarization beam splitters. the multiplexer is easy to fbricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5Gbps-per-channel WDM transmission system. We find that the rejection of adjacent channels is more than -6dB, and the signal leakage through output port is less than -34dB.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.87-96
• /
• 2001

This article proposes traffic dispersion with optical transmission technical and development of transmission rate for the safe multicast computer communication in the high bandwidth, Recently multicast traffic such as distance conference or Internet broadcast increases therefore the importance of traffic dispersion and transmission rate is emphasized. Ultimately this article offers the way of carrying out the above suggestion, First this paper points out traffic problems occurred in voice and text centered transmission. Next, transmission rate can be controlled by optical transmission technic to solve above difficulties in the multimedia and Internet. We investigated the feature and output on Add-Drop Mux/Demux and Also presented charges of length accord each stage in interference. We can show, the best data of design as a result of this experiment.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.93-104
• /
• 2007

Traffic grooming, in which low-rate circuits are multiplexed onto wavelengths, with the goal of minimizing the number of add-drop multiplexers (ADMs) and wavelengths has received much research attention from the optical networking community in recent years. While previous work has considered various traffic models and network architectures, protection requirements of the circuits have not been considered. In this paper, we consider survivable traffic grooming, or grooming traffic which contains a mix of circuits that need protection and that do not need protection. We assume a unidirectional ring network with all-to-all symmetric traffic with $t\geq1$ circuits between each node pair, of which s require protection. As it turns out, survivable traffic grooming presents a significant tradeoff between the number of wavelengths and the number of ADMs, which is almost non-existent in non-survivable traffic grooming for this type of traffic. We explore this tradeoff for some specific cases in this paper. We also present some new results and solution methods for solving certain non-survivable traffic grooming problems.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.547-555
• /
• 2006

We implemented DPU(Double-Pass Gain-Clamped) L-band EDFA for highly efficient amplification. A lasing signal generated within the linear cavity, can minimize the fluctuation of surviving channels when several WDM(Wavelength Division Multiplexing) channels are added or dropped. The new method measuring the characteristics of transient response of surviving channels quantitatively is suggested. It is to measure the ratio of lasing output before add or drop to that after add or drop. We investigated dynamic characteristics by using this method according to lasing wavelengths and propagation directions within the cavity. Experimental measurements show that the short lasing wavelength and backward propagation direction is the best condition for small fluctuation of surviving channels.