• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.151-154
• /
• 2006

In the present paper, hovering performance analyses of proprotor and helicopter rotor blades were performed by using FLUENT software. As a proprotor, TRAM(Tilt Rotor Aeroacoustic Model) was selected and performance analysis was carried out with mesh adaptation for more elaborate solution. As a helicopter rotor blades, two bladed Caradonna and Tung's rotor and four-bladed BO-105 helicopter rotor blades were selected. In case of Caradonna and Tung's rotor, vortex trajectory was compared with experimental data to inspect the vortex convection capability of the present flow solver. For the final case, performance of BO-105 helicopter rotor blades was investigated and compared with experimental data. After performance analyses of proprotor and helicopter rotors, it was shown that the present solver showed reasonable vortex strength, wake geometry and thurst coefficient distributions. But power coefficient was somewhat overestimated about $10%{\sim}15%$ regard less of mesh adaptation.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.579-579
• /
• 2001

One of the most important factors for the clinical success of adhesive posterior restorations is marginal adaptation. This property is very closely related to mechanical properties and to the shrinkage behavior of composite materials. Most of modem composite materials are light-cured. This is why the first part of this lecture will be confined to our recent research on light curing, such as plasma polymerization, LED polymerization and the power of modem halogen lamps. In the second part of the lecture the shrinkage properties such as dimensional shrinkage and shrinkage forces of different light curing materials and during different curing procedures will be discussed. Finally, in the third part of the lecture, marginal adaptation before and after loading in different cavity classes and by using different restorative techniques and curing procedures will be presented. Data will also be given on wear resistance, abrasiveness against opposing cusps and postcuring of composite materials.(omitted)

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.914-921
• /
• 1992

In this paper, we introduce a Walsh network and an LMS algorithm, and show how these can be realized as an adaptive equalizer. The Walsh network is built from a set of Walsh and Block pulse functions. In the LMS algorithm, the convergence factor is an important design parameter because it governs stability and convergence speed, which depend on the proper choice of the convergence facotr. The conventional adaptation techniques use a fixed time constant convergence factor by the method of trial and error. In this paper, we propose an optimal method in the choice of the convergence factor. The proposed algorithm depends on the received signal and the output of the Walsh network in real time.

• 대한치과보철학회지
• /
• 제56권1호
• /
• pp.17-24
• /
• 2018

가철성 국소의치의 금속구조물을 제작하는 방법은 왁스 패턴을 제작하여 주조하는 lost wax technique이 주로 사용되어 왔으나, 디지털 기술의 발달로 서베잉과 금속구조물을 CAD (Computer aided design)로 디자인하여 제작할 수 있게 되었다. 여러 증례에서 CAD를 이용한 pattern의 프린팅 방식으로 얻은 레진 패턴이 구강 내에 정확하게 적합 되었고 최종 금속구조물 또한 좋은 적합도를 보였다고 보고되었다. 본 원저는 치조골 소실이 심한 상, 하악부분 무치악 환자에서 가철성 국소의치의 금속구조물을 두 가지 방식으로 각각 제작하였다. 첫 번째는 일반적인 lost wax technique과 두 번째는 CAD를 통해 pattern을 프린팅하여 금속구조물을 주조하는 방식으로 제작하여, CAD data와 fit checker를 이용해 금속구조물과 서베이드 크라운과의 유격을 측정함으로써 금속구조물의 적합도를 비교하였다. 두 가지 방식 모두 임상적으로 사용 가능한 금속구조물의 적합도를 얻었기에 이를 보고하고자 한다.

• 대한치과의사협회지
• /
• 제57권12호
• /
• pp.747-756
• /
• 2019

This paper reviews the adaptation accuracy and mechanical properties of currently used denture processing systems with base resin materials and introduces the latest research on the development of antimicrobial denture base resins. Poly(methyl methacrylate) has been successfully used as a dental denture base resin material by the compress-molding method and heat polymerization for a long time, but recently, new processing techniques, injection molding-methods or fluid-resin technique are also used for fabricating denture base. However, studies indicated that there was no difference between the injectionmolding and the conventional compression-molding method in terms of adaption accuracy of denture base. The fluid-resin fabrication and one injection-molding systems exhibited better adaptation accuracy than the other processing methods. Resin denture bases in the oral cavity may undergo midline fractures due to flexural fatigue from repeated masticatory loading. For those patients, impact resistant denture base resins are recommended to prevent denture fracture during service. Thermoplastic denture base resins can be helpful for patients suffering from allergic reaction to resin monomers with a soft-fit, however, thermoplastic resins with low stiffness can irritate gum tissues and accelerate abnormal alveolar ridge resorption. Moreover, due to low chemical durability in oral cavity, those should be used for a limited period of time.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.334-346
• /
• 1997

Incidence of using esthetic composite resin in the posterior area is increasing but there were lots of inconsistent reports about their microleakage and marginal adaptation. The purpose of this study was to evaluate the differences of microleakage and marginal adaptation according to restorative techniques. 30 cavities with enamel gingival margin were prepared and restored with 3 types of composite resin [Z-100($Scotchbond^{TM}$ MP), AELITEFIL ($Onestep^{TM}$), Her culite XRV(Fuji BOND LC)] in direct technique and another 30 cavities were restored with preformed CR inlays and 3 different modern resin and resin-modified GI cements (Superbond C&B, Choice, Fuji Duet). Samples were chemically stressed in 75% ethanol for 24 hours and were thermocycled (5-$55^{\circ}C$(500 times. The degree of microleakage through proximal and gingival margins was examined by 1 % MB dye and the degree of marginal adaptation by examining the margins via SEM. The following results were obtained ; 1. In direct groups, Herculite XRV [Fuji BOND LC, 35.13 (15.50) %] group showed statistically different, less microleakage than Z-100 [$Scotchbond^{TM}$ MP, 72.91 (16.91 %] group and AELITEFIL [One-step, 93.73 (13.66) %] group (p<0.05). 2. In indirect groups, the degree of microleakage in Mean(S.D.) were: Super bond C & B [39.00 (24.35) %], Choice [57.19 (33.80) %], Fuji Duet [58.22 (40.36) %]. But there was no significant difference. 3. There was no significant difference between resin cement and resin-modified GI cement. 4. There were gaps at the interface with the tooth structure, but no gap was seen at the interface with restoration in all specimens. 5. In direct groups, Herculite XRV(Fuji BOND LC) group made little gap compared with other groups, but 40-$50{\mu}m$ thickness of bonding agent, Fuji BOND LC, looked like a cement used in indirect technique. 6. All indirect groups showed a variety of cement thickness, from less than $20{\mu}m$ to over $100{\mu}m$ and that dimension of buccal/lingual margin was less than that of gingival margin.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.478-481
• /
• 1996

Tracking a target of versatile maneuver recently demands a stable adaptation of tracker, and the multiple model techniques are being developed because of its ability to produce useful information of target maneuver. This paper presents the way to apply the multiple model method in a moving-target and moving-platform scenario, and the estimation and prediction results better than those of single Kalman filter.

• 전자통신동향분석
• /
• 제15권1호통권61호
• /
• pp.15-23
• /
• 2000

이동 네트워킹 환경에서 프록시의 적용은 메모리 요구량의 감소, 성능 향상, 비용과 활용도 측면에서의 효율성 등 많은 점에서 효용성이 입증되고 있다. 따라서 본 고에서는 프록시를 기반으로 하는 다양한 적응 기법들을 조사.분석하고, 아울러 프록시를 적용하는 데 있어서의 이슈가 되는 문제들을 살펴봄으로써 이동/무선 환경에서 프록시를 보다 효과적으로 활용할 수 있기를 기대한다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2005년도 International Symposium & conference of the Plant Resources Society of Korea
• /
• pp.100-106
• /
• 2005

• 한국조명전기설비학회지:조명전기설비
• /
• 제5권4호
• /
• pp.15-20
• /
• 1991

본 연구는 공장자동화에 이용되는 산업용 로보트의 분산 적응 제어기법을 고찰한 것이다. 이 제어기법은 매니풀레이터가 원하는 경로를 따라 진행할 때 부하의 변동에 신속히 대응할 수 있도록 함으로서 실시간 제어가 가능하게 하는 것이다. 제어방식은 전체 시스템을 규모가 작은 여러 개의 부시스템으로 분리하고, 각 부시스템을 공칭제어기와 적응제어기로 제어하는 것이다. 이 제안한 기법을 컴퓨터 시뮬레이션한 결과 매니풀레이터 동력학이 비선형이며 부하변동이 있을 때에도 원하는 궤적에 양호하게 추종함을 알 수 있었다.