• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.49-56
• /
• 2009

In this paper, we propose a method of energy level, node degree and selection information based CDS(Connected Dominating Set) construction algorithm for more efficient routing in ad-hoc wireless networks. Constructing CDS in ad-hoc wireless network, it is necessary to make more efficient algorithm that is faster, more simple and has low power consumption. A CDS must be minimized because nodes in the CDS consume more energy in order to handle various bypass traffics than nodes outside the set. It is better not to reconstruct CDS after constructing the most efficient CDS. To overcome this problem, we proposed the CDS construction algorithms based on EL+ND+Sel method. We compared and estimated the performance in each situation of EL + ND and EL + ND + Sel.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.15-24
• /
• 2008

The data delivery confirmation method of MIL-STD-188-220C, which is a tactical wireless mobile Ad-Hoc communication protocol, is that a source node requires the end-to-end ack from all destination nodes and the data-link ack from 1-hop neighboring destination nodes and relaying nodes, regardless of the hop distance from a source node to destination nodes. This method has the problem to degrade the whole communication network performance because of excessive data traffic due to the duplicate use of end-to-end ack and data-link ack, and the collision among end-to-end acks on the wireless network in the case of confirming a data delivery within an 1-hop distance. In order to solve this problem, this paper has proposed the method to perform the data delivery confirmation with the improvement of communication network performance through the data traffic reduction by achieving the reliable data delivery confirmation requiring the only data-link ack within an 1-hop distance. The effects of the proposed method are analyzed in the two aspects of the data delivery confirmation delay time and the data delivery confirmation success ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1561-1570
• /
• 2009

Being different from traditional mobile communication networks or wireless LAN with access points, ad hoc network can provide direct communications between homogeneous stations. Thus, it can be considered as a much advanced network. Somehow, many researches have been done to enhance system performance of ad hoc networks up to now, one of which is cooperative communications. In this paper, a cooperative MAC protocol, called CO-MAC protocol, is proposed and its performance is evaluated with a mathematical approach. Numerical results show that this scheme provides more enhanced system throughput especially when frame transmission error probability is high than DCF scheme, which is the key protocol in IEEE 802.11 standard, and rDCF scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1139-1145
• /
• 2010

Wireless mesh network is similar to ad-hoc network, so when transferred to the data packet in the wireless environment, interfered factor arise. When TCP(Transport Control Protocol) was created, however as it was design based on wired link, wireless link made more transmission error than wired link. It is existent problem that TCP unfairness and congestion collapse over wireless mesh network. But packet losses due to transmission errors are more frequent. The cause of transmission error in wireless ad-hoc network may be inexactly regarded as indications of network congestion. And then, Congestion Control Algorithm was running by this situation causes the TCP performance degradation. In this paper, proposed TCP can adaptively regulate the congestion window through moving node in the Wireless Mesh Network. And it enhanced the performance.

• Journal of Internet Computing and Services
• /
• v.5 no.2
• /
• pp.75-84
• /
• 2004

Geocasting, a variant of the conventional multicasting problem, is one of communication type in which the data packets are delivered to a group of all nodes within a specified geographical region (i.e., the geocasting region) and is called location-based multicasting(LBM)(l). An Ad-hoc network is a dynamically reconfigurable and temporary wireless network where all mobile devices using batteries as energy resources cooperatively maintain network connectivity without central administration or the assistance of base stations. Consequently, the technique to efficiently consume the limited amounts of energy resources is an important problem so that the system lifetime is maximized. In this paper, we propose a LBPA(Location-Based Power Aware) geocasting algorithm that selects energy-aware neighbor to route a packet towards the target region In Ad-hoc network environments. The method Is such that the energy consumption is balanced among the nodes in proportion to their energy reserves. Through the simulations, the proposed LBPA algorithm shows better results, that is, as good as 40% on the average over the conventional LBM algorithm in terms of the network lifetime.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.25-33
• /
• 2008

In this paper, the transmit power minimization for Poisson distributed wireless ad-hoc relay networks in Rayleigh fading channels is considered. We investigate two power allocation methods one is a minimum power allocation (MPA) strategy and the other is an equal outage power allocation (EOPA) strategy. We analyze the total transmit power of two allocation methods under the given end-to-end outage probability constraint. Our results show that the MPA achieves more power saving than EOPA, and the power saving is more significant as the number of relay nodes increases.

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.203-210
• /
• 2003

In this paper we proposed a new MAC protocol to improve QoS(Quality of Service) for real-time traffic in wireless Ad Hoc networks. NMAC protocol have a contention period reservation scheme and a priority control scheme to provide fairness of nodes and QoS. Through simulation, the NMAC protocol compared with existing CSMA MAC protocols shows improvement in performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2B
• /
• pp.69-75
• /
• 2008

We propose new routing scheme, Cooperative Diversity-based Routing (CDR)which utilize the cooperative space diversity for power saving and for performance enhancement of wireless ad-hoc networks. The end-to-end performance of the proposed routing, CDR, is analyzed based on the Haenggi's link model. The improved performance is compared with Multi-hop Relay Routing (MRR) by analytical methods. When the required outage probability is $1{\times}10^{-3}$ at the destination node in ad-hoc networks with 7 nodes, we noticed that each node can save power consumption by 21.5 dB in average, by using our proposed CDR compared to MRR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.107-112
• /
• 2009

Spectral efficiency of current two-phase cooperative communications protocols is low since in the second time the relay forwards the same signal received from the source to the destination, the source keeps silent in this time. In this paper, we propose a novel cooperative communications protocol where the signal needed to transmit to the destination is sent in both phases, the source and the relay also transmit different signal to the destination thus no loss of spectral efficiency. This protocol performs signal selection based on log-likelihood ratio (LLR) at relay and maximum likelihood (ML) detection at destination. While existing protocols pay for a worse performance than direct transmission in the low SNR regime which is of special interest in ad hoc networks, ours is better over the whole range of SNR. In addition, the proposal takes advantages of bandwidth efficiency, long delay and interference among many terminals in ad hoc network. Simulation results show that the proposed protocol can significantly save total energy for wireless ad hoc networks.