• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.65-70
• /
• 1997

An active sonar is used to the navigation system or military purposes. In the active sonar one of the problems is a reverberation. The reflected signals from surface, bottom, and volume are received at receiver. This reverberation is an interference in the active sonar, and for the enhanced performance must be rejected. In this paper I study the method to reject the reverberation. The proposed method use the orthogonal property between the signal subspace and noise subspace in the eigen subspace. In the proposed method the noise subspace is calculated. I have performed the computer simulations to prove the performance of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.401-407
• /
• 2021

The continuous active sonar technology is effective for detecting and tracking targets because of short target revisiting rate. Generalized Sinusoidal Frequency Modulation (GSFM) pulses suitable for continuous active sonar systems are known to be capable of obtaining high time-bandwidth product while maintaining the orthogonality between pulses. However, it is unknown how to calculate an appropriate length of time to correlate received GSFM pulses in the presence of a target with acceleration. In this paper, we propose a method to calculate the appropriate time length based on the correlation when matching the received signal in the continuous active sonar system using GSFM pulse. The proposed method calculates the correlation according to the acceleration of the target and calculates the signal processing length according to the correlation. It is shown that stable detection performance can be obtained when the signal processing length calculated by the proposed method through the level of the sidelobe is applied.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.3-7
• /
• 2001

In active sonar system using CW signal, when the noise included reverberation has not the white characteristics, the CFAR detector estimates high threshold. Because of this reason it cannot detect targets and not resolve the closely spaced multiple targets. In order to solve these problems, we propose an adaptive reverberation rejection filter The proposed filter is composed of an adaptive filter and a fixed filter with its coefficients. To study the performance of the proposed adaptive reverberation rejection filter, various experiments have been performed under In moving active sonar environments. As a results, the proposed method has the improved performance than the previous methods.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.123-131
• /
• 2011

In this paper, modeling and design of a distributed detection system are considered for an active sonar sensor network. The sensor network has a parallel configuration and it consists of a fusion center and a set of receiver nodes. A system with two receiver nodes is considered to investigate a theoretical aspect of design. To be specific, AND rule and OR rule are considered as the fusion rules of the sensor network. For the fusion rules, it is shown that a threshold rule of each sensor node has uniformly most powerful properties. Optimum threshold for each sensor is obtained that maximizes the probability of detection given probability of false alarm. Numerical experiments were also performed to investigate the detection characteristics of a distributed detection system with multiple sensor nodes. The experimental results show how signal strength, false alarm probability, and the distance between nodes in a sensor field affect the system detection performances.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.2
• /
• pp.83-93
• /
• 2024

In this study, we present a sewer pipe inspection technique through a combination of active sonar technology and deep learning algorithms. It is difficult to inspect pipes containing water using conventional CCTV inspection methods, and there are various limitations, so a new approach is needed. In this paper, we introduce a inspection method using active sonar, and apply an auto encoder deep learning model to process sonar data to distinguish between normal and abnormal pipelines. This model underwent training on sonar data from a controlled environment under the assumption of normal pipeline conditions and utilized anomaly detection techniques to identify deviations from established standards. This approach presents a new perspective in pipeline inspection, promising to reduce the time and resources required for sewer system management and to enhance the reliability of pipeline inspections.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.179-185
• /
• 2017

The problem that occurred in the design/fabrication/testing of the wideband transmitting power amplifier for an embedded active SONAR (Sound Navigation and Ranging) system operating underwater was analyzed and the solution of the problem was proposed in this paper. Wideband acoustic SONAR systems had been developed in order to improve the underwater detection performance. The underwater acoustic transmission system had been also developed to achieve the wideband SONAR system. In this paper, the wideband acoustic transmission signal was generated using a 2 Level sawtooth type Class D PWM (Pulse Width Modulation) which was not complicated to implement. When the sonar signals having two or more frequencies were simultaneously generated, parasitic frequencies were added to the original signals by integer multiples of the frequency difference of the original signal. To cope with this problem, we proposed a way to remove the parasitic frequency from the source signal through modeling and simulation of the implemented power amplifier and PWM control hardware using MATLAB and Simulink.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.661-669
• /
• 2019

High frequency active sonar is appropriate for detecting small targets such as a diver in coast environment. In case of using high frequency active sonar in shallow coastal environment, a false alarm rate is high due to clutters caused by marine biological noise, ship noise, wake, etc. In this paper, we propose an algorithm for target detection which is robust against clutter in active sonar system in shallow coastal environment. The proposed algorithm increases the rate of reduction clutter using calculation of statistical characteristics of signal and a clustering method. The algorithm is evaluated and analysed with sea trial data, as a result, that shows the rate of reducing rate of clutter of 96 % and over.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.349-352
• /
• 2011

HMS(Hull Mount Sonar) equipment mounted on PCC(Patrol Combat Corvette) is suitably designed for active mode, and the specific character of sensor or system is not appropriate for the frequency range to detect a torpedo. In this article, in order to implement the function of detecting torpedoes with HMS of existing PCC, I will analyze the feature of input signals each PCCs and design a circuit to compensate reversly for the input signal in certain frequency. And also, I will suggest the most adequate torpedo defense system suitable for the special operating environment and the charateristic of naval vessels, implementing functions such as AGC of input signal and fixing the frequency range of different input signals per different warships.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.91-97
• /
• 2001

Since the new field information of target signal is important in the development and verification of active sonar system, experimental method and simulation technique are widely used in order to analyze the detail characteristics of target scattered echoes. Therefore, in this paper, the scale target experiment is performed to develope and Improve the target signal simulation model. Since the experimental results show that the specular reflection is the major component among scattering mechanisms, the target signal simulation model based on the Geometric Optics Theory (GOT) is developed. Complex target is separated into simple shapes, known as canonical shape. The contribution from individual canonical shapes are summed with proper phase and amplitude to produce the target strength of the whole complex body. Simulated target signal is compared with the experimental results and discussed.