• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.429-436
• /
• 2010

A series of some biologically active halogenopurines were synthesized from commercially available guanine (1). The reaction of guanine with acetic anhydride yielded 2,9-diacetylguanine (2-1) by acetylation reaction. Further treatment of 2-1 with $POCl_3$ by PEG-2000 phase transfer catalysis furnished the important compound 3a, then 2-amino-6-halogenopurines (3b-d) were obtained through chlorine-exchange halogenations between KX and 3a by TPPB phase transfer catalyst. Further, 2-halogenopurines (2-2a-d, 4-2a-d, 5a-d) were efficiently prepared from 2-amino-6-substituted purines (1, 3a, 4-1) via a diazotization catalyzed by their corresponding CuX, and some new compounds 2-2a, 2-2c, 2-2d, 4-2c, 4-2d, 5b, 5c and 5d have been discovered. The structures of synthesized compounds were mainly established on the basis of their elemental analysis, $^1H$ NMR, as well as their mass spectral data. All the title compounds were screened for their antifungal activities, and some of the compounds showed promising activity.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.139-142
• /
• 2018

Silicon (Si) is a promising anode material for next-generation lithium ion batteries (LIBs) because of its high capacity of 4,200 mAh/g ($Li_{4.4}Si$ phase). However, the large volume expansion of Si during lithiation leads to electrical failure of electrode and rapid capacity decrease. Generally, a binder is homogeneously mixed with active materials to maintain electrical contact, so that Si needs a particular binding system due to its large volume expansion. Polyvinyl alcohol (PVA) is known to form a hydrogen bond with partially hydrolyzed silicon oxide layer on Si nanoparticles. However, the decrease of its cohesiveness followed by the repeated volume change of Si still remains unsolved. To overcome this problem, we have introduced the electrospinning method to weave active materials in a stable nanofibrous PVA structure, where stresses from the large volume change of Si can be contained. We have confirmed that the capacity retention of Si-based LIBs using electrospun PVA matrix is higher compared to the conservative method (only dissolving in the slurry); the $25^{th}$ cycle capacity retention ratio based on the $2^{nd}$ cycle was 37% for the electrode with electrospun PVA matrix, compared to 27% and 8% for the electrodes with PVdF and PVA binders.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.901-908
• /
• 2018

Graphite is used as a sample anode active material. However, since the maximum theoretical capacity is limited to $372mA\;h\;g^{-1}$, a new anode active material is required for the development of a high capacity lithium ion battery. The maximum theoretical capacity of Si is $4200mA\;h\;g^{-1}$, which is higher than that of graphite. However, it is not suitable for direct application to the anode active material because it has a volume expansion of 400%. In order to minimize the decrease of the discharge capacity due to the volume expansion, the Si was pulverized by the dry method to reduce the mechanical stress and the volume change of the reaction phase, and the change of the volume was suppressed by coating the carbon layers to the particle size controlled Si particles. And carbon fiber is grown like a thread on the particle surface to control secondary volume expansion and improve electrical conductivity. The physical and chemical properties of the materials were measured by XRD, SEM and TEM, and their electrochemical properties were evaluated. In this study, we have investigated the synthesis method that can be used as anode active material by improving cycle characteristics of Si.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.440-445
• /
• 2019

It has developed a method that can recover efficiently the reproducible resources from the vehicle waste lithium second battery module. Module cell consists of copper thin film, aluminum thin film and diaphragm made with polymer between these thin films. Cell was disassembled completely without any damage in glove box and through several steps. Preferentially, cathode active material was separated from aluminum thin film at heat treatment of 400 ℃. The retrieved cathode active material was then obtained as high purity after calcining at 800 ℃ to remove residual carbon. Based on this study, it was found that rare metals such as Co, Ni, Mn and Li made up of cathode active material could recover above 80% from aluminum thin film.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1759-1762
• /
• 2014

The enantioselective ${\alpha}$-chlorination of cyclic ${\beta}$-ketoesters catalyzed by chiral 2-aminoalcohol derivatives (2f) has been developed. For the optically active ${\alpha}$-chlorinated products, the isolated yields are in the range of 85-94% and the enantiomeric excesses are up to 84% ee.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.661-661
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2968-2972
• /
• 2013

A highly efficient and environmentally benign protocol has been developed for the first time to produce a wide range of biologically active 5-hydroxyindole derivatives using montmorillonite KSF clay as a reusable solid acid catalyst. The use of recyclable clay makes this procedure quite simple, more convenient and cost-effective.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.336-338
• /
• 1987

A new coupling agent, 1-methanesulfonyloxy-6-trifluoromethyl-benzotriazole (3), was prepared by the reaction of 1-hydroxy-6-trifluoromethylbenzotriazole (1) and methanesulfonyl chloride. 3 was reacted with 2-(2-amino-4-thiazolyl)-2-synalkoxyi minoacetic acid (4) to give a mixture of active intermediates (5 and 6), which was treated with 7-aminocephalosporanic acid derivatives (10) to afford cephalosporin derivatives (11) in short reaction time with high yields.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.3
• /
• pp.297-301
• /
• 2021

Microbial fuel cells (MFCs) convert chemical energy to electrical energy via electrochemically active microorganisms. The interactions between microbes and the surface of a carbon electrode play a vital role in capturing the respiratory electrons from bacteria. Therefore, improvements in the electrochemical and physicochemical properties of carbon materials are essential for increasing performance. In this study, a microwave and sulfuric acid treatment was used to modify the surface structure of graphite granules. The prepared expandable graphite granules (EGG) exhibited a 1.5 times higher power density than the unmodified graphite granules (1400 vs. 900 mW/m³). Scanning electron microscopy and Fourier transform infrared spectroscopy revealed improved physical and chemical characteristics of the EGG surface. These results suggest that physical and chemical surface modification using sulfuric acid and microwave heating improves the performance of electrode-based bioprocesses, such as MFCs.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.305-312
• /
• 2008

A novel TPC-PEG-TPC with active end-groups was obtained from the end-groups of polyethylene glycol (PEG) modified by terephthaloyl chloride (TPC). These active end-groups can link up with a rare earth ion, which is a luminescent center of a rare earth fluorescent complex. Complexes of Eu-PEG with novel ligands (TPC-PEG-PTC) were synthesized by the coordination of the active reactant (as the first ligand) and phenanthroline (as the second ligand) with $Eu^{3+}$.IR, $^1H$-NMR, element analysis, DSC, WAXD, fluorescent spectroscopy, TGA, and SEM were used to characterize the structure and properties of these complexes. The results showed that this type of complex is a heat storage material with the phase change character of polyethylene glycol (PEG) and the luminescent properties of europium. There was no thermal decomposition of the complex of Eu-PEG until $300^{\circ}C$. SEM showed that the complex of Eu-PEG can be dispersed in PE.