• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.78-84
• /
• 1999

$(Ni, Zn)Fe_2O_4$ powders were prepared through self-propagating high temperature synthesis reaction and the effects of initial zinc oxide powder size and oxygen pressure on the magnetic properties of the final combustion products were studied. The ferrite powders were combustion synthesized with iron, iron oxide, nickel oxide, and zinc oxide powders under various oxygen pressures of 0.5~10 atmosphere after blended in n-hexane solution for 5 minutes with a spex mill, followed by dried at 120 $^{\circ}C$ in vacuum for 24 hours. The maximum combustion temperature and propagating rate were about 1250 $^{\circ}C$ and 9.8 mm/sec under the tap density, which were decreased with decreasing ZnO size and oxygen pressure. The final product had porous microstructure with spinel peaks in X-ray spectra. As the ZnO particle size in the reactant powders and oxygen pressure during the combustion reaction increase, coercive force, maximum magnetization, residual magnetization, squareness ratio were changed from 1324 Oe, 43.88 emu/g, 1.27 emu/g, 0.00034 emu/gOe, 37.8$^{\circ}C$ to 11.83 Oe, 68.87 emu/g, 1.23 emu/g, 0.00280 emu/gOe, 43.9 $^{\circ}C$ and 7.99 Oe, 75.84 emu/g, 0.791 emu/g, 0.001937 emu/gOe, 53.8 $^{\circ}C$ respectively. Considering the apparent activation energy changes with oxygen pressure, the combustion reaction significantly depended on initial oxygen pressure and ZnO particle size.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2017

Cement industry is typical carbon-emission industry. If the industrial by-products(granulated blast-furnace slag (GGBFS), fly ash, etc.) are used a large amount, it might be able to reduce cement consumption and mitigate carbon emissions. In this case, however, decrease of early strength is relatively large. Therefore, there is a limitation in increase of the amount of substitute. Considering these circumstances, it would be a good solution to reduce carbon emissions in cement industry to improve the performances of mixed cement through proper alkali-activation in Portland blended cement using GGBFS or fly ash. Therefore, this study prepared concrete in ready-mixed concrete manufacturing facilities with an addition of a binder which used 2.0% modified alkali sulfate activator after mixing Portland cement, GGBFS and fly ash in the ratio of 4:4:2 and assessed its basic properties. The results found the followings: The use of modified alkali-sulfate activator slightly reduced slump and shortened setting time. As a result, bleeding capacity decreased while early strength improved. In addition, there is no big difference in carbonation resistance. It appears that there should be continued experiments and analyses on the related long-term aged specimens.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.355-359
• /
• 1985

The purified $\beta$-galactosidase from L. sporogenes was most active at pH 7.0 and 6$0^{\circ}C$ with O-nitrophenyl-$\beta$-D-galactopyranoside (ONPG) in 0.05 M phosphate buffer. It was stable over a pH range from 5.0 to 9.0 and lost less than 10％ of its activity after heating for 30 minutes at 6$0^{\circ}C$ and pH 7.0. All the mineral ions examined in this work showed no significant activating effect, whereas L-cysteine exerted a great stimnlatory effect on the enzyme activity at the concentration of 10 mM. The Km values were 1.2 mM for ONPG and 33.3 mM for lactose. Approximately 85％ of lactose in cow's milk, in 10％ skim milk and in 5％ lactose solution was hydrolyzed after 4 hours incubation at 6$0^{\circ}C$ with 2 units of the purified $\beta$-galactosidase per $m\ell$ of the substrate solutions. The $\beta$-galactosidase from L. sporogenes, therefore, is considered to be suitable for hydrolysis of lactose in milk and other dairy products.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.303-308
• /
• 2019

L-carnitine is found in high levels in muscle tissues. It has been developed as a nutrient and dietary supplement, and also used as a therapeutic supplement in various diseases including type II diabetes, osteoporosis and metabolic neuropathies. However, it is not fully understood how it affects cellular mechanisms in colorectal cancer. Therefore, we attempted to determine the effect of L-carnitine in HCT116 human colorectal cancer cells. First, the HCT116 cells were exposed to L-carnitine for 24 hours at 0-40 mM, and then analyzed for cellular proliferation, oxidative stress and related mechanisms. In a MTT assay, L-carnitine inhibited cellular proliferation and induced reactive oxygen species (ROS) in HCT116 by DCF-DA analysis. To analyze the mechanism of L-carnitine in colorectal cancer cells, we performed a western blot analysis for pERK1/2 and pp38 MAP kinase. The western blot showed that L-carnitine significantly increased protein levels of pERK1/2 and pp38 compared with control. Taken together, we found that L-carnitine has anti-proliferative function via increased ROS and activation of ERK1/2 and p38 pathway in HCT116. These findings suggest that L-carnitine may have an anti-proliferative role on colorectal cancer.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.269-276
• /
• 2019

A colorimetric rapid detection method based on acetylcholinesterase (AChE) was developed for the analysis of organophosphorus (OP) and carbamate (CB) pesticides. The AChE catalyzes acetylthiocholine into thiocholine having (-) and (+) charges, and the (+) charge results in gold nanoparticle (GNP) aggregation. The in-activation of AChE by OP and CB has been well known. In order to optimize the colorimetric method, optimal dilution times of commercial serum containing AChE, diameter of GNP, and concentration of acetylthiocholine were tested as a key parameter. The colorimetric detection limits of the method were 7.5 ng/mL for both dimethyl amine and carbofuran pesticides in 60% ethanol. No cross-reaction to other chemicals, such as aflatoxin B1 and ochratoxin A, which can be contaminated with pesticides in agricultural products, was observed. Recoveries from lettuce, sesame leaf, and cabbage lettuce spiked with known concentrations of dimethyl amine and carbofuran were found to be ranged from 83.85 to 133.16%. These results indicated that the colorimetric rapid method based on AChE can be a useful tool for the sensitive, specific, rapid, and accurate detection of OP and CB pesticides in fresh vegetables.

• Laboraroty Animal Research
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2018

Regulation of gastrointestinal hormones have been reported in animal models for constipation undergoing laxative therapy when administered herbal products. We undertook to investigate whether the laxative activity of gallotannin-enriched extracts isolated from Galla Rhois (GEGR) affects the regulation of gastrointestinal hormones, by examining the concentration of four hormones and the activation of their receptors in the loperamide (Lop)-induced constipation model. Stool parameters, including number, weight and water content, were significantly recovered in the Lop+GEGR treated group, relative to the Lop+ vehicle treated group; however, food intake and water consumption were maintained at a constant level. Also, a similar recovery was detected for thickness of mucosa, muscle and flat luminal surface in the Lop+GEGR treated group. Furthermore, concentration of the four gastrointestinal hormones evaluated, namely, cholecystokinin (CCK), gastrin (GAS), somatostatin (SS) and motilin (MTL), were lower in the Lop+vehicle treated group than the No treated group, but were remarkably enhanced in the Lop+GEGR treated group. Moreover, the downstream signaling pathway of MTL and SS receptors were recovered after GEGR administration. Results of the present study therefore indicate that the laxative effects of GEGR treatment may be tightly related with the regulation of gastrointestinal hormones in the Lopinduced constipation model.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.359-365
• /
• 2021

A heavy particle accelerator is a device that accelerates particles using high energy and is used in various fields such as medical and industrial fields as well as research. However, secondary neutrons and particle fragments are generated by the high-energy particle beam, and among them, the neutrons do not have an electric charge and directly interact with the nucleus to cause radiation of the material. Quantitative evaluation of the radioactive material produced in this way is necessary, but there are many difficulties in actual measurement during or after operation. Therefore, this study compared and evaluated the generated radioactive material in the concrete shield for protons and carbon ions of specific energy by using the simulation code FLUKA. For the evaluation of each energy of proton beam and carbon ion, the reliability of the source term was secured within 2% of the relative error with the data of the NASA Space Radiation Laboratory(NSRL), which is an internationally standardized data. In the evaluation, carbon ions exhibited higher neutron flux than protons. Afterwards, in the evaluation of radioactive materials under actual operating conditions for disposal, a large amount of short-lived beta-decay nuclides occurred immediately after the operation was terminated, and in the case of protons with a high beam speed, more radioactive products were generated than carbon ions. At this time, radionuclides of ⁴⁴Sc, ³H and ²²Na were observed at a high rate. In addition, as the cooling time elapsed, the ratio of long-lived nuclides increased. For nonparticulate radionuclides, ³H, ²²Na, and for particulate radionuclides, ⁴⁴Ti, ⁵⁵Fe, ⁶⁰Co, ¹⁵²Eu, and ¹⁵⁴Eu nuclides showed a high ratio. In this study, it is judged that it is possible to use the particle accelerator as basic data for facility maintenance, repair and dismantling through the prediction of radioactive materials in concrete according to the cooling time after operation and termination of operation.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.167-173
• /
• 2011

Nickel cobalt ferrite($Ni_{0.5}Co_{0.5}Fe_2O_4$) powder was prepared through the ceramic route by the calcination of a stoichiometric mixture of NiO, CoO and $Fe_2O_3$ at $1100^{\circ}C$. The pressed pellets of $Ni_{0.5}Co_{0.5}Fe_2O_4$ were isothermally reduced in pure hydrogen at $800{\sim}1100^{\circ}C$. Based on the thermogravimetric analysis, the reduction behavior and the kinetic reaction mechanisms of the synthesized ferrite were studied. The initial ferrite powder and the various reduction products were characterized by X-ray diffraction, scanning electron microscopy, reflected light microscope and vibrating sample magnetometer to reveal the effect of hydrogen reduction on the composition, microstructure and magnetic properties of the produced Fe-Ni-Co alloy. The arrhenius equation with the approved mathematical formulations for the gas solid reaction was applied to calculate the activation energy($E_a$) and detect the controlling reaction mechanisms. In the initial stage of hydrogen reduction, the reduction rate was controlled by the gas diffusion and the interfacial chemical reaction. However, in later stages, the rate was controlled by the interfacial chemical reaction. The nature of the hydrogen reduction and the magnetic property changes for nickel cobalt ferrite were compared with the previous result for nickel ferrite. The microstructural development of the synthesized Fe-Ni-Co alloy with an increase in the reduction temperature improved its soft magnetic properties by increasing the saturation magnetization($M_s$) and by decreasing the coercivity($H_c$). The Fe-Ni-Co alloy showed higher saturation magnetization compared to Fe-Ni alloy.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.496-501
• /
• 2021

In this study, the marine agar-degrading bacterium Pseudoalteromonas sp. JH-1 was isolated, and its growth and agarase properties were investigated. Seawater was collected from the offshore of the Yonggung Temple in Busan, and agar-degrading bacteria were isolated and cultured with marine agar medium. The bacterium Pseudoalteromonas sp. JH-1 was isolated through 16S rRNA gene sequencing. The extracellularly secreted enzyme was obtained from the culture broth of Pseudoalteromonas sp. JH-1 and was used to characterize its agarase. The extracellular agarase exhibited a maximum activity of 116.6 U/l at 50℃ and pH 6.0 of 20 mM Tris-HCl buffer. Relative activities were 31, 59, 94, 100, 45, and 31% at 20, 30, 40, 50, 60, and 70℃, respectively. Relative activities were 49, 85, 100, 86, 81, and 67% at pH 4, 5, 6, 7, 8, and 9, respectively. Residual activity was more than 85% after exposure at 20, 30, and 40℃ for 2 hr, and more than 82% after exposure at 50℃ for 2 hr. Zymogram analysis confirmed that Pseudoalteromonas sp. JH-1 produced at least two agarases of 55 and 97 kDa. As the products of α-agarase and β-agarase have antioxidation, antitumor, skin-whitening, macrophage activation, and prebiotic effects, further studies are needed on the agarase of Pseudoalteromonas sp. JH-1.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.145-152
• /
• 2020

Onion is a perennial herb of the lily family that has a long history and has long been widely used throughout the world as it is one of the most important condiments in our diet, along with chili peppers and garlic. It has been used for cooking and processing food with its unique flavor and aroma. Because of the nature of onions, long-term storage can lead to spoilage. Research was done to increase profits through processing and expand various onion products. A low temperature extraction method was used to study the physiological activation effect and onion processing method of flavonoid component weak to heat.