• 복식
• /
• 제57권9호
• /
• pp.67-75
• /
• 2007

The purpose of this research is to conserve of golden decoration(Jikgeumdan) of Chima(skirt) and Jeogori(Korean jacket) of the costumes excavated from Hangju Gi' tomb(17th Century) of Joseon dynasty$(1392{\sim}1910)$ and to focus on the development of conservation skill to prevent flakings of gold leaves in gilt paper strips. Up to the present, in case of golden decorations of costumes excavated from tombs of Joseon dynasty, some of gold leaves in gilt paper strips of costumes were flaked away by deterioration of adhesives in tombs. However, most of gold leaves were flaked away and totally lost by wet cleaning for eliminating contaminants after excavation. In order to prevent flaking, preliminary experiments for re-adhesion of gold leaves have been carried out. Firstly, simulation was performed using gold leaf which was available in the market. Adhesives used in this research were water-soluble adhesives(hide glue(cow, rabbit), glue made from air bladders of sciaenoid fish and Primal AC-3444 of acrylic emulsion) and solvent-soluble adhesives(acrylic adhesive Paraloid B-67 and B-72). Because of difficulty in wetting and spreading of adhesive solutions into the interface between gold leaf and Korean paper, water-soluble adhesives were not proper for adhesion of gold leaf and Korean paper. Solvent-soluble adhesives were easily infiltrated into interface between gold leaf and Korean paper and the adhesive force was also satisfied. From this result, the researchers chose more flexible Paraloid B-72$(Tg\;40^{\circ}C)$ 1% solution than Paraloid B-67$(Tg\;50^{\circ}C)$ for adhesion of gold leaf and Korean paper. Secondly, using Paraloid B-72 1% solution, the estimations of re-adhesions of gold leaves in gilt paper strips of Jeogori were carried out. When Paraloid B-72 1% solution was injected three times into the interface between gold leaf and Korean paper, the re-adhesion was most effective. On the basis of the results in these preliminary experiments, re-adhesions of gold leaves in gilt paper strips of Chima and Jeogori were carried out on condition of three times injections of Paraloid B-72 1% solution before wet cleaning. After wet cleaning, the most of the gold leaves were survived, which was confirmed by both the examination with the naked eye and the microscopic examination.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.16-25
• /
• 2011

Core 입자로 methyl methacrylate (MMA), n-butyl methacrylate (BMA)를 하고 shell 입자로 MMA, BMA, stylene (St), 2-hydroxylethylmethacrylate (2-HEMA), acrylic acid (AA)를 각각 사용하여 개시제 aommonium persulfate (APS), 유화제로 sodium dodecyl benzene sulfonate (SDBS)의 농도(0.01~0.03 wt%), 단량체의 종류와 조성을 변화시켜 수용성 유화중합으로 다중 core-shell 복합입자를 제조하여 전화율, 입자경 및 입도 분포, 평균 분자량, 분자구조, 유리전이온도, 입자의 형태 및 인장강도와 신율을 각각 측정하여 다음과 같은 결론을 얻었다. SDBS 농도 0.02 wt%에서 MMA core-(BMA/St/AA) shell 복합인자가 전화율이 98%로 우수하였고, 입자 직경은 SDBS 농도 0.03 wt%에서 BMA core-(MMA/St/AA) shell의 복합입자가 $0.47{\mu}m$로 높게 나왔다. 유리전이온도 측정은 단일 core-shell 복합입자의 2군데에 비하여 다중 core-shell 복합입자는 3군데가 존재하여 shell단량체 내의 단량체의 종류와 조성에 따라 유리전이온도 조절도 가능하고 동시에 접착력이 향상된 접착소재로서 부직포 섬유 결속제로 사용될 수 있었다.

• 접착 및 계면
• /
• 제22권2호
• /
• pp.31-38
• /
• 2021

본 연구에서는 polyoxyethylene(10) dodecylphenyl ether와 3-butenoic acid를 사용하여 방향족을 포함한 아크릴계 비이온 반응성 유화제를 합성하였으며, 합성된 비이온 반응성 유화제는 ¹H-NMR과 FT-IR로 구조를 확인하였다. 수성 아크릴 베이스 에멀젼의 제조에서 합성된 방향족을 포함한 비이온 반응성 유화제와 방향족을 포함하지 않은 비이온 반응성 유화제 및 음이온 유화제를 사용하여 고형분, 전환율, 입도분포, 박리강도와 내열유지력의 물성을 확인하였다. 입도분포의 경우 370~698 nm 범위에서 측정되었으며, 박리강도는 평균 1.507~1.802 kg_f/in범위에서 측정되었다. 제조된 베이스 에멀젼의 내열유지력은 0.50~2.00 mm 범위에서 측정되었으며, 특히 합성된 방향족을 포함한 비이온 반응성 유화제를 사용한 경우, 방향족을 포함하지 않는 비이온 반응성 유화제를 사용한 경우보다 내열 유지력이 가장 뛰어남을 확인하였으며, 수성 아크릴 점착제로 유용하게 사용될 수 있을 것으로 판단된다.

• Journal of Pharmaceutical Investigation
• /
• 제41권1호
• /
• pp.1-7
• /
• 2011

The effects of different formulation variables including pressure sensitive adhesive (PSA), permeation enhancer, thickness of the matrix and loading amount of drug on the transdermal absorption of galantamine were investigated across the hairless mouse skin. The permeation profile of galantamine was different depending on the types of PSA, loading amount of drug, thickness of the matrix and type of enhancer used. Highest flux of galantamine was obtained from acrylic PSA but crystals were formed in the patch within 72 h. Among the PSAs screened, crystal formation was not observed only in the patches formulated in Styrene Butadiene Styrene (SBS) matrix. Permeation rate increased linearly as the concentration of galantamine in SBS matrix increased from 2.5 to 15% w/w. Among the enhancers screened, Brij$^{(R)}$ 30 provided highest flux of galantamine. Matrix thickness of 80 ${\mu}m$ was optimum for maintaining adhesiveness as well as consistently delivering galantamine for longer period of time.

• 대한치과교정학회지
• /
• 제44권1호
• /
• pp.44-49
• /
• 2014

Objective: To evaluate the effects of ultrasonic instrumentation with different scaler-tip angulations on the shear bond strength (SBS) and bond failure mode of metallic orthodontic brackets. Methods: Adhesive pre-coated metallic brackets were bonded to 72 extracted human premolars embedded in autopolymerizing acrylic resin. The teeth were randomly divided into 3 groups (n = 24 each) to undergo no treatment (control group) or ultrasonic instrumentation with a scaler-tip angulation of $45^{\circ}$ ($45^{\circ}$-angulation group) or $0^{\circ}$ ($0^{\circ}$-angulation group). SBS was tested in a universal testing machine, and adhesive remnant index (ARI) scores were recorded. The Kruskal-Wallis test and Mann-Whitney U-test were used for statistical analysis. Results: The control group had a significantly higher mean SBS value than the treated groups, which showed no significant differences in their mean SBS values. The ARI scores were not significantly different among the groups. Conclusions: Ultrasonic instrumentation around the bracket base reduces the SBS of metallic orthodontic brackets, emphasizing the need for caution during professional oral hygiene procedures in orthodontic patients. The scaler-tip angulation does not influence the SBS reduction and bond failure mode of such brackets.

• 보존과학회지
• /
• 제29권1호
• /
• pp.25-33
• /
• 2013

전통 단청 교착제인 젤라틴(아교)의 물성에 따른 단청 도막의 성능을 평가하고자 직접 추출하거나 시판되는 아교 및 젤라틴 5종을 선정하고 수분반응성과 촉진내후성을 실험하였다. 실험결과, 겔 강도가 높은 1종의 젤라틴 단청 도막에서는 아교 대체 재료인 아크릴산 에스테르 수지 도막보다 수분 흡수율이 높고 촉진 내후성 시험 후에도 밀착성이 높았을 뿐만 아니라 젤라틴 도막보다 내수성이 우수하였다.

• 접착 및 계면
• /
• 제3권1호
• /
• pp.13-19
• /
• 2002

We have studied on the surface and adhesion properties for acrylic terpolymers, having both hydrophobic and hydrophilic side chains, synthesized via solution polymerization. In order to develop a waterborne material. we tried to synthesize these terpolymers via emulsion polymerization. The polymeric emulsion synthesized was mainly composed of methyl methacrylate (MMA), methoxy-polyethyleneglycol methacrylate (MPEGMA) having hydrophilic side chains and methoxypolypropyleneglycol methacrylate (MPEGMA) having hydrophobic side chains. The viscosities of this series increased with an increase in the content of the co-monomer such as MPEGMA and (MPEGMA). This behavior resulted in the increase in the diameter and heterogeneity of the emulsion particle via AFM observation. Furthermore. the tensile adhesion strength and 90-degree peel strength of the adhesive of these polymeric emulsions were measured. In the case of polymeric emulsion composed of the same content of both hydrophilic and hydrophobic component, the adhesion property showed the highest value. However, since the adhesion properties as a practical applicable adhesive were poor, some improvements were required. When the composition above was modified with butyl acrylate (BA), the improvement effect on adhesion strength was accepted. In particular, 90-degree peel strength increased up to a maximum of 400% of the original value.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.12-16
• /
• 2016

Toluene-free pressure sensitive adhesives were synthesized by using butyl acrylate (BA), 2-hydroxy ethyl acrylate, methyl methacrylate, acrylic acid (AA) as monomers and ethyl acetate as a solvent. The polymerization recipes were designed by changing 1, 3, 5 part per hundreds monomer (phm) of AA content on the basis of 100 BA parts. Two crosslinking agents, ethyl glycol diglycidyl ether (EDGE) and isophorone diisocyanate (IPDI) were added to the synthesized polymers to increase adhesion due to crosslinking. In the measurement of properties, holding power, peel strength, and initial tackiness increased with AA content due to crosslinking between carboxyl group in AA and epoxy group in EDGE and isocyanate group in IPDI. In the comparison of two crosslinking agents, EDGE showed better in the three properties than IPDI by better reaction of epoxy group of EDGE to carboxyl group of AA.

• 청정기술
• /
• 제11권1호
• /
• pp.41-50
• /
• 2005

본 연구는 환경친화적인 선형 비이온 계면활성제인 LE-형유화제를 사용하여 점착성분의 단량체로 노말부틸 아크릴레이트 (n-butyl acrylate, n-BA)와 응집성분의 단량체로 메틸메타 아크릴레이트 (methyl metacrylate, MMA)를 사용하여, 폴리머 시멘트용 아크릴계 에멀젼 수지를 제조하기 한 최적조건을 얻기 위해 수용액상에서 유화중합을 실시하였다. 실험결과, 사용한 계면활성제 (LE-형)의 친수성인 체인 길이(n)의 값이 증가할수록 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최종 폴리머 에멀젼의 농도는 이 계면활성제의 사용량을 증가시킴에 따라 증가하다가 어느 농도 이상에서 응석의 발생이 거의 없는 폴리머 에멀젼을 얻을 수 있었으며, 반면에 평균 입자크기도 사용량에 따라 작아지다가 250 nm로 일정한 크기를 나타내었다. 또한 기능성 폴리머로서 보조모노머의 첨가는 최종 폴리머 에멀젼의 응석과 입자크기에 크게 영향을 미쳤는데, 주 모노머에 보조 모노머인 아크릴산 (acrylic acid, AA)과 아크릴 아마이드 (acrylic amide, AM)의 혼합하여 첨가한 경우, 첨가하지 않은 경우에 비해 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최적조건에서 어진 아크릴 폴리머 에멀젼은 평균 입자크기 200-300 nm, 제타전위 (zeta potential)값 -50 mv 정도였으며, 단일 유리전이온도 (glass temperature, Tg)를 가진 고분자 나노 입자가 수용액상에 잘 분산되어 있음을 알 수 있었다. 따라서 중합조건을 최적화시켜 안정된 폴리머 에멀젼을 얻을 있었다.

• 대한소아치과학회지
• /
• 제45권4호
• /
• pp.445-454
• /
• 2018

이 연구의 목적은 Calcium silicate를 기반으로 한 2종의 치수복조재 (Biodentine, RetroMTA)와 임상에서 사용되는 여러 가지 상아질 접착제 간의 전단결합강도를 비교 평가하는 것이다. 중심구를 가진 아크릴 레진 블록 80개를 제작하고 2그룹으로 나누어 Biodentine (BD)과 RetroMTA (RMTA)를 중심구 안에 채운 후, 무작위로 10개씩 4개의 하위군을 나누어 재료 상방에 4가지 상아질 접착제인 Clearfill SE (CSE), AQ bond plus (AQ), All bond universal (ABU) 자가부식, ABU 일괄부식을 도포한 뒤 그 위에 복합레진을 적용하였다. Universal testing machine을 이용해 전단결합 강도를 측정하였다. 통계분석은 Kruskal-Wallis를 사용하였고 Mann-Whitney의 사후검정을 하였다. 연구결과, BD - ABU 자가부식군이 가장 높은 전단결합강도를, RMTA - AQ 군이 가장 낮은 전단결합강도를 보였다. ABU 일괄부식과 ABU 자가부식군, ABU 일괄부식과 CSE 간의 유의미한 차이는 보이지 않았다. 또한 같은 상아질접착제 적용 시, BD가 RMTA보다 높은 전단결합강도를 보였다. 또한, BD와 RMTA 그룹 군에서 ABU 자가부식군 도포 후, 레진 적용했을 때 향상된 전단결합강도를 보였다.