• 한국통신학회논문지
• /
• 제33권11A호
• /
• pp.1087-1094
• /
• 2008

본 논문에서는 Cyclic-Prefix CDMA using Good-Autocorrelation-Sequence(GAS-CP-CDMA) 시스템의 초기동기 포착방법이 제안되었다. GAS-CP-CDMA 시스템에 사용할 수 있는 자기상관특성이 우수한 시퀀스는 m-시퀀스와 CAZAC 시퀀스가 있다. 비록 GAS-CP-CDMA 시스템이 이동통신 시스템의 상향링크에 적용되어 자신의 셀의 다중사용자 및 다중경로에 의한 간섭신호를 원천적으로 상쇄하여 기존 CDMA 이동통신 시스템에 비해 약 2배의 용량을 갖도록 제안된 시스템이지만, 통신을 시도하는 시점에서 초기동기를 신뢰성 있게 획득하는 것은 중요한 과제이다. 본 논문에서 비동기식 수신 전력 검출값과 임계값이 초기동기를 판단하기 위한 기준으로 사용되었다. 모의실험에 사용한 GAS-CP-CDMA 시스템용 시퀀스는 CAZAC 시퀀스를 사용하였다. 모의실험 결과 최적의 동작을 위한 적정 임계값은 주로 사용자 수에 의해 결정되는 것을 알 수 있었다. 본 모의실험의 결과를 통해 GAS-CP-CDMA시스템 구축에 필수적인 동기포착 구현이 가능함과 적정 임계값을 설정하는 방안이 도출되었다.

• 전자공학회논문지 IE
• /
• 제47권4호
• /
• pp.18-27
• /
• 2010

본 논문은 회전체의 진동 데이터를 효율적으로 획득하기 위해 데이터 획득 시스템을 설계하였다. 데이터획득 장치는 필터와 증폭기로 구성한 아날로그 로직과 ADC와 DSP, FPGA, FIFO 메모리를 갖고 있는 디지털로직으로 구성하였다. 센서로부터 회전체의 진동신호는 아날로그 로직을 통과하여 FPGA에 의해 제어되고, 그 신호는 ADC를 통해 변환되고 FIFO 메모리에 저장하였다. 디지털 선호 처리는 FPGA 제어어의해서 FIFO 메모리에 들어온 데이터를 이용하여 DPS에서 신호처리를 수행할 수 있도록 구성하였다. 회전체 진동을 진단 및 분석하기 위한 진동 요소는 데이터 선호로서 실수 변환, Peak to Peak, 평균 값 산출, GAP, 디지털 필터, FFT 둥을 DSP에서 처리하고 설정된 이벤트를 추적하며, 그 결과 값을 도출하여 조기 경보 구축하였다 묘든 신호처리 과정 및 이벤트 추적은 여러 분석 단계 의해서 처리 시간이 소요되며, 특정 이벤트에 따라 처리 소요 시간에도 변동이 발생한다. 데이터 획득 및 처리는 연속적으로 실시간 분석을 수행해야 하지만, DSP에서는 입력된 신호를 처리하는 동안에 입력된 이후의 데이터에서 다음 입력처리 시간동안 획득한 데이터는 처리 될 수 없고, 특히 다수의 채널에서는 더 많은 데이터 손실이 일어날 수 있다. 따라서 본 논문에서는 데이터 손실이 적고 빠른 처리를 위하여 DPS와 FPGA을 효과적인 사용하였고, 이러한 여러 분석 단계 신호처리에서 발생되는 시간을 최소한으로 줄일 수 있는 방법으로 DSP에서 처리되는 신호단계 중 일부를 FPGA에서 처리할 수 있도록 설계 하였고 그리고 단일의 신호 처리에 의해 수행되는 분석 단계를 병렬 처리로 데이터를 실시간으로 처리하였다. 그 결과로 DSP 만으로 구성된 신호처리 보다 DSP와 FPGA로 구성된 시스템이 훨씬 빠르고 안정된 신호 처리 방법을 제시하였다.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1019-1039
• /
• 2015

Shanghai Tower is a composite structure building with a height of 632 m. In order to verify the structural properties and behaviors in construction and operation, a structural health monitoring project was conducted by Tongji University. The monitoring system includes sensor system, data acquisition system and a monitoring software system. Focusing on the health monitoring in construction, this paper introduced the monitoring parameters in construction, the data acquisition strategy and an integration structural health monitoring (SHM) software. The integration software - Structural Monitoring/ Analysis/ Evaluation System (SMAE) is designed based on integration and modular design idea, which includes on-line data acquisition, finite elements and dynamic property analysis functions. With the integration and modular design idea, this SHM system can realize the data exchange and results comparison from on-site monitoring and FEM effectively. The analysis of the monitoring data collected during the process of construction shows that the system works stably, realize data acquirement and analysis effectively, and also provides measured basis for understanding the structural state of the construction. Meanwhile, references are provided for the future automates construction monitoring and implementation of high-rise building structures.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.203-208
• /
• 2004

Recently, digital image is increasing greatly practical use degree in several industry fields including construction. And interest about 3D digital image that can express practical object realistically is augmented greatly. In this study, developed 3D digital image generation system based on digital photogrammetry and created 3D digital image for object. And, wished to verify of 3D digital image through comparative analysis with processing result by digital photogrammetry system been using much the latest for acquisition of 3D information. Also, wished to apply to surface information acquisition about rock slope and execute investigation about discontinuity of joint etc. As the result, could created 3D digital image for object using the 3D digital image generation system developing in this study, and acquire surface information about rock slope efficiently.

• 시스템엔지니어링학술지
• /
• 제16권1호
• /
• pp.36-42
• /
• 2020

Due to the population of the Republic of Korea is getting less, the shortage of available troops has become a big issue. In response to this, the need for Unmanned weapon systems is rising. To operate an Unmanned weapon system near borderlines or low altitude, it is necessary to protect not only the system itself but also operational information communicated between the Unmanned system and control station, so that they should be safe using Cybersecurity measures. Besides, it is critical to protect a few core technologies applied to Unmanned weapon systems throughout the Anti-Tamper measures. As the precedent studies only focus partially, Cybersecurity or Anti-Tamper, it is acknowledged that comprehensive studies are needed to be conducted. This study is to incorporate both concepts into Korea's defense acquisition process. Specifically, we will outline the concepts and needs of Cybersecurity and Anti-Tamper, and briefly present ways to apply them simultaneously.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1036-1039
• /
• 1996

The performance of real-time systems depends upon how well the tasks are scheduled within a cycle time and how fastly the response is made according to the occurrence of an external event. This paper presents the design of an effective real-time data acquisition system in order to gather the data from an automobile engine. This paper investigates an estimation and a restriction method of execution for aperiodic data. Also, the guarantee problem of real-time constraint is presented for periodic data. Through the experiments, the hard real-time guarantee problem of periodic data is studied and the damage problem of periodic data according to the increase of aperiodic tasks is analyzed.

• 한국디지털건축인테리어학회논문집
• /
• 제11권3호
• /
• pp.109-113
• /
• 2011

This study is suggest the test system for BIM(Building Information Modeling) qualification. And this study is the field-based BIM educational program with the acquisition of the qualifying certificates. Since field-based BIM and Curriculum(of University and Junior College) are highly linked to the actual practical affairs, the learning connected to the practical affairs out of the teaching focused on BIM modeling would satisfy students, and it would make the acquisition of the certificates which determinate the capability of the practical affairs. Thus teachers should guide students to get the certificates thoroughly, make them understand the importance of the acquisition of the certificates.

• 경영과학
• /
• 제26권3호
• /
• pp.157-167
• /
• 2009

Technology transition from defense technology to weapon system is an important process for defense acquisition program. Many countries such as USA, UK, Australia and Republic of Korea use technology readiness level (TRL) as a tool for technology transition by identifying critical technology elements (CTEs) and assessing the technology maturity. In this paper we review a transition process for the defense acquisition. Then we suggest a method to evaluate system's TRL using each component TRL and integration readiness level (IRL) between each technologies. We apply the method to an ACTD project. A result show that technology maturity is influenced by integration between technologies.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2007년도 정기학술대회
• /
• pp.146-154
• /
• 2007

AutoCor is a method for the automatic acquisition and classification of corpora of documents in closely-related languages. It is an extension and enhancement of CorpusBuilder, a system that automatically builds specific minority language corpora from a closed corpus, since some Tagalog documents retrieved by CorpusBuilder are actually documents in other closely-related Philippine languages. AutoCor used the query generation method odds ratio, and introduced the concept of common word pruning to differentiate between documents of closely-related Philippine languages and Tagalog. The performance of the system using with and without pruning are compared, and common word pruning was found to improve the precision of the system.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.679-684
• /
• 1996

The work was aimed at realize the problem of seed processing . Solving this problem it was ascertained that the existing mathematical methods are reliable enough, but they are used practically very seldom. The work offers to use the expert system technology which allows to solve problems connected with practical knowledge of experts in the region of investigation effectively. The method of knowledge structuring and analizing as well as technique of knowledge acquisition which is necessary for realization of this technology are worked-out in the work. As the result applying the worked-out method the prototypes of the expert system (ES) are created : -ES " Sieves " ; research prototype for the sieve choice for the seed sorting machines -ES " Diagnostics " ; displaying prototype for the technological determination of action disrepair of seed sorting machines.