• Child Health Nursing Research
• /
• v.26 no.2
• /
• pp.190-200
• /
• 2020

Purpose: This study was conducted to identify correlations between how much fever management information mothers obtained from the internet and their actual knowledge and practices of fever management. Methods: This was a descriptive survey of 172 mothers with children aged between 0 and 3 attending five daycare centers located in the city of Daegu. Descriptive statistics, the independent t-test or one-way analysis of variance, and Pearson correlation coefficients were used for data analysis. Results: In total, 75% of the mothers had searched the internet for information on fever management. The overwhelming majority (92.2%) used information from the internet to help manage fever in their children. Positive correlations were found between acquiring fever management information from the internet and fever management practices (r=.18, p=.038), and between mother's knowledge and practices of fever management (r=.27, p<.001). Conclusion: Based on the results of this study, to improve fever management practices, it is necessary to increase mothers' knowledge. Therefore, resources should be developed to augment mothers' knowledge of fever management through the internet.

• Journal of the military operations research society of Korea
• /
• v.16 no.2
• /
• pp.14-28
• /
• 1990

The objective of this study is to propose how to acquire through international cooperation the sensitive nuclear technology, so called reprocessing technology. In spite of the need to reuse spent fuel, the transfer of the sensitive technology has been tightly controlled by the nuclear advanced countries due to the fear of nuclear proliferation and, in fact, it would be impossible to secure it by the economic means. In this regard, as a means of acquiring the sensitive nuclear technology, this study proposes the following; 1) President's declaration concerning the peaceful uses of nuclear energy, 2) the establishment and maintenance of national basis through inter-ministerial cooperation, 3) as a confidence building measure, the efforts to strengthen our role in the international nuclear community, and 4) the establishment of the synthetic feedback system to efficiently coordinate. In line with those stated above, this study suggests that it be necessary to invest consistently for developing new technologies and cultivating human resources. Furthermore, this study proposes the necessity to resolve the problems lying ahead by the national consensus achieved through the discussions among the public concerning the sensitive nuclear technology.

• Journal of the Korean Society for information Management
• /
• v.38 no.2
• /
• pp.305-336
• /
• 2021

This study explored the user's information needs and information behavior for the development of academic library services. The content analysis of qualitative data showed that the in-depth interview participants have six types of information needs such as 'suitability, up-to-dateness, uniqueness, reliability, practicality, and convenience' while going through societal, educational, and research-related changes. Interview participants solved their information needs by acquiring the resources necessary for each individual's task through information behaviors using information media, human resources and the places. Each participant tried to solve his/her information problem through individual efforts based on their different media and information utilization capabilities. Based on the analysis, this study presented four directions in the development of academic library services. They are an personalized information literacy service, a space to meet the characteristics of information needs, an infrastructure platform for exchanging human resources, and an accessible support service for utilizing information media.

• Architectural research
• /
• v.20 no.3
• /
• pp.93-102
• /
• 2018

With the change in Earth's ecosystems due to climate change, a number of studies on zero energy buildings have been conducted globally, due to the depletion of energy and resources. However, most studies have concentrated on residential and office buildings and the performance predictions were made only in the design phase. This study verifies the zero-energy performance in the operational phase by acquiring and analyzing data after the completion of an exhibition building. This building was a retention building, in which a renewable energy system using a passive house building envelope, solar photovoltaic power generation panels, as well as fuel cells were adopted to minimize the maintenance cost for future energy-zero operations. In addition, the energy performance of the building was predicted through prior simulations, and this was compared with actual measured values to evaluate the energy performance of the actual operational records quantitatively. The energy independence rate during the measurement period of the target building was 123% and the carbon reduction due to the energy production on the site was 408.07 tons. The carbon reduction exceeded the carbon emission (331.5 tons), which verified the carbon zero and zero-energy performances.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1033-1038
• /
• 2005

As a global effort to conservate the environment, life cycle assessment(LCA) which considers the environmental impact through the life cycle of a product, from acquiring of resources to scrapping, has been actively applied. The LCA is a tool to calculate quantitatively the environmental impacts caused by products or services through their life cycles. The list of numerous data should be analyzed, stored and conducted in order to assess the environmental impacts. Therefore, it is necessary to develop a software for LCA, which can perform the interpretation as well as the environment impact assessment to execute the analysis of such a large number of data effectively. At this time, for the existing some kinds of general LCA softwares, the information about all of input and output should be fed directly and the conclusion is deduced by linking to the database from the public authorized organizations. That makes it possible to evaluate the environmental grades accurately, but it is too slow and difficult for general users to operate and applied it into an electric motor unit(EMU). Therefore, in this research, the basic model was designed, which is based on construction of database structure of the software and organization of architecture, to develop an advanced software for EMU according to user and purpose of it by benchmarking of domestic and international softwares. The result of this study would be applied to develop the LCA software in the future.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.37-50
• /
• 2024

The magnetotelluric (MT) survey can be affected by external environmental factors. In particular, when acquiring MT data in islands, it is essential to consider the combined effect of topography and sea to understand the results and make accurate interpretations. To analyze the MT response (apparent resistivity, phase) with consideration of the effect of topography and sea, a small cone-shaped island model surrounded by deep sea was created. Two-dimensional (2-D) and three-dimensional (3-D) forward modeling were performed on the terrain model considering topography and the island model considering both topography and sea. The 2-D MT response did not reflect the topographic and sea effect of the direction orthogonal to the 2-D profile. The 3-D MT response included topographic and sea effects in all directions. The XY and YX components of the apparent resistivity were separated on undulating topography, such as a hill. A conductor at 1 km below sea level could be distinguished from topographic and sea effects in the MT response, and low resistivity anomaly was attenuated at greater depths. This study will facilitate understanding of field data measured on small islands.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.43-51
• /
• 2023

In this research, through LCA analysis, the environmental impact of automotive engine manufacturing and re-manufacturing was analyzed from the perspective of the entire process, and the greenhouse gas reduction effect was calculated based on this. The amount of greenhouse gas emitted from the process of acquiring and manufacturing raw materials for automotive engines is about 3,473 kg for new manufacturing and 872 kg for re-manufacturing. Thus, the amount of greenhouse gas reduction by engaging in re-manufacturing is about 2,601 kg; the analysis shows a reduction effect in each part of the entire process except for the processing stage. As a result of the LCA weighted analysis, the environmental impact of new product manufacturing was found to be 1.07E+03 Eco-point, and it was 2.67E+02 Eco-point for re-manufacturing. The share of GWP(Global Warming Potential) among the six major impact categories(Abiotic Depletion Potential, Acidification Potential, Eutrophication Potential, Global Warming Potential, Ozone-layer Depletion Potential, Photochemical Oxidant Creation Potential) as high at 99.72%(new manufacturing) and 99.68%(re-manufacturing).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.374-380
• /
• 2015

With explosion of wireless traffic it is required to further investigate the technologies on acquiring available spectrum resources and on sharing frequency with existing users. In 3GPP, it is started to study on feasibility and functional requirement of LTE standard in order to extend cellular services offered on only licensed band to 5 GHz unlicensed band. Operating scenario on LTE in unlicensed band is focused on carrier aggregation with licensed band, and the coexistence with Wi-Fi services in 5 GHz band is concerned as a major requirement. For a single global solution framework for licensed assisted access to unlicensed spectrum, listen-before-talk(LBT) mechanism of European regulation for fair access to channel under the coexistence environments is currently examined in 3GPP. In this paper, we evaluate two types of LBT, frame based equipment and load based equipment, with considering LTE carrier aggregation feature and performances of file transferred time and throughput.

• Journal of The Korean Association of Information Education
• /
• v.7 no.1
• /
• pp.27-36
• /
• 2003

Environmental problems can be dealt in the diverse areas such as engineering, public administration, and law. However, the education on environmental preservation is conceived as the fundamental solution for environmental problems, because the education can make the person of action. Specifically, building the attitude and habit of environmental preservation through environmental education is the effective and efficient way of environmental preservation. This research was conducted to develop an education system that is designed to build students' attitude and habit of environmental preservation through acquiring knowledge and functions of natural environment. The proposed system supports diverse learning activities such as writing, drawing, listening natural sounds and music, and problem solving. The system is technically designed on the Web to promote students' creativity and autonomy, and also are theoretically based on constructivism to build the will of environmental preservation. Moreover, the proposed Web-based system includes diverse functions such as classes, material resources, environmental quiz pool, environmental work gallery, which motivate students' learning activities. Therefore the proposed Web-based system is expected as an effective tool to achieve the goals of environmental education such as acquiring environmental knowledge and functions, building attitude of environmental preservation, and participating in the environmental preservation activities.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.85-85
• /
• 2017

Potato is important carbohydrate source over the world in that revealing high productivity per the unit area, and their cultivation area is estimated to be increased to cope with a scarcity of food according to the population increase. Major cultivated species of potato is Solanum tuberosum (2n = 4x = 48) and regarded as being originated in Andes region of South America. The diverse potato genetic resources has been collected and perserved in Highland Agricultural Research Institute (NICS, RDA), and the genetic materials as DNA stock is conserved in National Agrobiodiversity Center(NAS, RDA). The understanding of genetic constitution of conserved diversity is the basis for the germplam management and further utilization. In this study, we analyzed the genetic diversity of potato germplasm(479 accessions) using 24 microsatellite markers which have been internationally used for fingerprinting of potato accession. The allele number and polymorphic information content (PIC) of total accessions per locus was ranged from 2 to 18 (mean = 8.2) and from 0.214 to 0.771 (mean = 0.595), respectively. Especially, the accession originated from Korea revealed average allele number of 6.0 (2 - 11) and average PIC value of 0.58 (0.193 - 0.763). Three groups were deduced by phylogenic analysis (Group-1, -2, -3); Korean accessions showed close genetic similarity to Japanese and USA accessions, and Korean landraces were mainly included in Group-3. We try to elaborate the genetic diversity analysis of conserved potato germplasm by acquiring more genotypes using applicable molecular markers.