• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.39-42
• /
• 1991

Two types of speech signal processores (SSP) for cochlea prosthesis are designed. One is designed using cochlear model and the other is designed using Information (formant, pitch, intensity) extraction method. For these, cochlear model and acoustic information extraction method are proposed. The result shows SSP of cochlear model type contain more acoustic cues than that of information extraction type.

• The Journal of the Acoustical Society of Korea
• /
• 제11권1E호
• /
• pp.56-63
• /
• 1992

The poblem of active oise control has been analysed using a adaptive signal processing technique. In this methods, the adaptive signal processor or model predicts the primary sound wave travelling along the acoustic plant and generates the secondary source 180° out of phase which attempts to attempts to attenuate the undesired noise by destructive interference. In the solutions presented here, acoustic propagation delay is considered as a part of the model which used the FIR filter. The effects of error path and auxiliary path transfer functioin are anayzed and a new on=-line technique for error path modeling, adaptive delayed inverse modeling is presented. In this study, using these new concepts, our system can more reduce the noise level in duct to 5dB-15dB than only using LMS algorithm system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.376-380
• /
• 2009

Surface acoustic wave (SAW) device is widely used as a bandpass filter, a chemical or physical sensor, and an actuator. In this paper, we propose the capacitive gap measurement system with high precision through the signal processing using SAW device. The research process is mainly composed of theoretical part and experimental part. In theoretical part, equivalent circuit model was used to simulate the SAW response by the change of capacitance. In experimental part, commercialized capacitor was used to see the SAW response by the change of load capacitance. After that, gap adjustment system was made physically and the SAW response by the change of gap which caused the capacitance change was measured. And resolution and stroke was decided comparing the signal change and basic measurement noise level.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.16-25
• /
• 1998

This paper attempts to examine the characteristics of underwater acoustic signals distorted in shallow water environments. Time signals are simulated using an acoustic model that employs the Fourier synthesis scheme. An acoustic experiment was conducted in the shallow sea near Pohang, Korea, where water depth is about 60m. The environment in the simulation is set up so that it approximates the experimental condition, which can be regarded as range-independent. The signal is LFM(linar frequency modulated) type centered on one of the four frequencies 200, 400, 600 and 800Hz, each being swept up or down with the bandwidth of 100Hz. To analyze the signal characteristics, the study introduces a spectrum estimation scheme, pseudo Wigner-Ville distribution (PWVD). The simulated and measured signals suffer great interference by the interaction of neighboring rays. Although there are constructive or destructive interference, the signals keep LFM characteristics well. This is thought that only a few dominant rays of small loss contribute to the receive signals in a shallow water environment.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.413-421
• /
• 1990

Acoustic emission signals due to leak from circular holes of 0.4, 1, 2 and 4mm diameter and rectangular slits of different geometry having the same cross section as 4mm diameter hole was studied both analytically and experimentally. Acoustic emission signals from a wide-band type transducer were transformed to digital signals through a digital oscilloscope, and $V_{rms}$ and frequency spectrum were obtained by processing digital signals. Relationships between acoustic parameters and fluid mechanical parameters were derived analytically. A quadrapole aerodynamic model was applied in the analysis of leak from the circular holes and $V_{rms}$ was found to be proportional to the root square of leak rate through the circular hole. A modified model based on dipole source mechanism and laminar equivalent diameter was applied in the analysis of leak signals from the rectangular slits. In the case of constant pressure, $V_{rms}$ increased as the laminar equivalent diameter of slit decreased. In the case of constant laminar equivalent diameter, however the result was similar to that for leak from the circular hole. The frequency spectra of leak signals shows the same frequency characteristics irrespective of the pressure difference.rence.

• 한국음향학회지
• /
• 제38권4호
• /
• pp.387-395
• /
• 2019

수동소나에서의 표적기동분석은 방위 또는 방위-주파수와 같이 제한된 정보를 이용하여 수행된다. 표적기동분석을 빠르고 정확하게 수행하기 위해서는 정확한 표적기동 초기치의 추정이 필수적이다. 기존의 표적기동분석과 달리 신호 대 잡음비 정보와 음파전달모델을 추가로 이용하면 표적기동분석의 정확도를 향상시킬 수 있다. 이 방법은 표적의 방사소음수준은 알고 있다고 가정하지만 가정한 수준과 실제 수준간의 오차에 따라 표적기동분석의 정확도가 저하될 수 있다. 본 논문에서는 수동 소나로 탐지한 표적 방위정보, 탐지 신호 대 잡음비 정보 및 음파전달모델을 이용한 표적기동분석 알고리즘을 한국 해양환경(동해/서해/남해)에서 수행한다. 그리고 가정한 표적 방사소음수준과 실제 수준간의 차이에 따른 성능분석 결과를 제시한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.311-314
• /
• 2001

This paper describes the simulation study, conducted on the propagation characteristics of AE signal in the connection of GIS. In the high voltage and large power system, the equipment with SF$\sub$6/ gas insulation which consists of the component part enclosed in the compressed gas has less affected by the environment than with air insulation. When the breakdown in the electric installation occurs, it takes much time to repair them though. Therefore it is very important to diagnose the propagation characteristics of AE signal in the GIS. So, in this investigation, we make a plane model of 362 kV GIS and modal and harmonic analysis to observe the vibro-acoustic property. Through the result of the analysis, we can make a further understanding on the vibro-acoustic characteristics of AE singnal in the connection of GIS.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.13-22
• /
• 1984

A surface acoustic wave signal processing device using the silicon surface state is presented and shown capable of storing a reference signal and later correlating another signal with the stored reference. The device memory consists of the storage of the spatial 2k pattern of an acoustic wave as stored charges in the surface state of silicon surface. Results of experiments are presented which characterize the operation of device. Simpliied models for charging process and nonlinear acoustoelectric interactions based on consideration of single surface state at the surface of silicon The validity of simplified model has been qualitatibely confirmed with experimental results and the application of this device to aprogrammable matched filter of communication is considered.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.621-628
• /
• 1998

In order to develop an inspection algorithm for an automatic eggshell inspection system, acoustic impulse response with neural network method was studied. An improved error backpropagation algorithm was selected as a loaming rule of neural network, and three layer network was chosen for the neural network architecture. Acoustic signals in time domain and theirs power spectrum were studied as the input to the neural network. The classification feasibility and success rate were investigated in terms of statistical analysis and neural network approach. As a result, the success rate was 95% with the statistical model having five independent variables. Among the neural network models studied, the power spectrum of acoustic signal as the input with 64 input neurons and the two impact data showed the success rate of 95.5% which was slightly higher than of statistical analysis.

• 융합신호처리학회논문지
• /
• 제20권4호
• /
• pp.177-185
• /
• 2019

본 논문에서는 수중음향 통신환경에서 다중경로에 의한 심볼간 간섭을 제거하기 위한 방법으로 STBC 전송구조를 결합한 FDE 기법을 제시하고, 그 성능을 평가하였다. 이를 위해 수중통신환경을 고려한 수중음향채널을 모델링하였고, 이 채널에 대한 수중통신 모의시험 결과를 제시하였다. 주파수영역 등화의 경우, 전송블록 양쪽에 훈련신호가 추가되는 구조적 특성상 OFDM 기법에 비해 약 4% 정도의 전송률 저하를 보이나 OFDM에 비해 4.4%에서 16.8%(SNR 9dB기준) 향상된 SER 특성을 보였다.